光学透明频率选择表面的设计研究

以氟化镁为基底材料, 采用基底、金属网栅与频率选择表面一体化设计方法设计了一种雷达波与光学波段双带通的结构. 利用模式匹配法对设计结构的传输特性进行了仿真研究, 并将设计结果与制备样件的测试结果进行了对比分析. 结果发现: 采用一体化设计的方法设计光学透明频率选择表面, 不仅能够快速得到电场基函数而且还能够准确预估其谐振尺寸, 从而在提高计算效率的同时避免了模式互作用零点的出现. 采用一体化设计方法获得了具有稳定滤波特性的光学透明频率选择表面, 为雷达/红外双模制导头罩的电磁屏蔽技术和隐身技术提供了一种有效技术方案. 关键词： 复合制导 频率选择表面 金属网栅 一体化设计     

非晶氧化钛薄膜形成过程中钛离子能量对表面结构影响的机理

研究了非晶氧化钛薄膜沉积过程中入射钛离子能量对表面结构形成机理以及薄膜特性的影响.模拟结果表明,通过提高入射钛离子能量,可以有效降低成膜表面粗糙度,从而减小薄膜表面的光学散射损耗.研究发现,当入射离子能量提高后,薄膜生长模式从"岛"状生长过渡到了"层"状生长,且离子入射点附近的平均扩散系数也有显著增加,这有利于形成更加平整的高质量薄膜表面.     

超光滑加工的后置处理算法研究

为了精确控制超光滑加工过程中磨头的运动轨迹,从而实现光学元件材料去除的均匀稳定,研究了超光滑加工的后置处理算法。分析了超光滑加工工艺的特点和相应的超光滑机床的机械结构,建立了机床的坐标系统,构造了机床的运动学模型。对于光学元件母线为任意平面曲线的情况,研究了磨头运动轨迹的等误差直线逼近算法。在曲率半径为290mm,相对口径为1∶2.9的凹球面上进行了超光滑加工实验。结果表明,利用所述算法可以精确地控制磨头的运动轨迹,从而保证材料去除的稳定性。     

FOURIER ANALYSIS OF TEMPORAL AND SPATIAL OSCILLATIONS OF TUNNELING CURRENT IN SCANNING TUNNELING MICROSCOPY

Partially oxidized Si(111) surfaces and surfaces of highly oriented pyrolytic graphite (HOPG) were studied by two different ultrahigh vacuum scanning tunneling microscope (UHV-STM) systems and by an STM system working under ambient conditions, respectively. The STM current images of partially oxidized Si(111) surfaces and HOPG surfaces were analyzed by one/two-dimensional fast Fourier transformation (1D-FFT/2D-FFT). The phenomenon of temporal oscillations of tunneling current on the partially oxidized Si(111) surfaces was detected with both UHV-STM systems. Temporal as well as spatial oscillations of tunneling current appeared in highly resolved STM current images of the Si(111) surfaces simultaneously, but both kinds of oscillations could be discriminated according to their different influence on the 2D-FFT spectra of the current images, while varying the scanning range and rate. On clean HOPG surfaces only spatial oscillations of tunneling current induced by the surface structure were observed.     

微平面接触分离中弯月面力的计算

微平面间黏着力对微机电系统(MEMS)非常重要,常是决定其能量损耗乃至寿命长短的最主要因素.MEMS中的黏着力主要来源之一就是介于两互相接触平面间的弯月面力.弯月面力主要取决于相互接触的两平面间形成的弯月面形状.本文通过分析两微小平面在分离过程中弯月面形状的变化,得到在不同表面亲水/疏水性能、初始液面高度、分离距离等条件下的弯月面形状,计算得出在不同初始条件下断裂高度和弯月面力的数值以及随之变化的规律,为MEMS的性能分析和寿命计算提供依据。     

液体表面张力系数测定实验的几点分析

用拉脱法测定水的表面张力系数实验中，用焦利氏秤测定（Ｆ—Ｗ）时，确定焦利氏秤标尺读数Ｌ１、Ｌ２的位置有两种方法。本文旨在详细分析这两种方法隐含的实验条件和对实验结果的影响．并进行比较，得出结论。     

氦同位素原子与钠分子碰撞转动激发积分散射截面的理论计算

多体刚性椭球模型是一种比较精确的描述氦原子与钠分子碰撞的理论模型.本文用多体刚性椭球模型计算了不同能量下He的同位素原子3He,4He,7He,10He与Na2分子碰撞的转动激发积分散射截面,表明增加椭球等势面个数可以得到更准确的转动激发积分散射截面;总结出3He,4He,7He,10He-Na2碰撞体系转动激发积分散射截面随相对入射能量和体系约化质量变化的规律;讨论了相对入射能量为100meV时,相互作用势的不同区域对4He-Na2碰撞体系转动激发积分散射截面的影响情况.     

Bioactive Components and Anticancer Activities of Spray-Dried New Zealand Tamarillo Powder

Tamarillo fruit contains many phytochemicals that have beneficial therapeutic and nutritional properties. Spray-drying is widely used to preserve fruit puree in powder form. However, to obtain high-quality fruit powder, the optimisation of spray-drying conditions is necessary, as a high drying temperature can damage sensitive bioactive compounds. This study investigated the effects of spray-drying on the microstructure, polyphenolics, total flavonoids, total carotenoids, antioxidant activity, and anticancer capacity of tamarillo powder. Response surface methodology (RSM) was used to optimise the spray-drying process to produce tamarillo powder. The independent variables were inlet drying temperature (120–160 °C), flow rate (1–5 g/mL), and maltodextrin concentration (0–10%). These variables influenced the microstructural attributes, bioactive components, and cytotoxicity of the spray-dried tamarillo powder. The increase in polyphenols and antioxidant activities were favoured under high-temperature spray drying conditions and a low carrier concentration. The optimised spray-drying conditions for producing tamarillo powder with high antioxidant and anticancer activities, high yield, and stable bioactive compounds were found to be at 146.8 °C inlet temperature, and a flow rate of 1.76 g/mL.     

New Cysteine-Containing PEG-Glycerolipid Increases the Bloodstream Circulation Time of Upconverting Nanoparticles

Upconverting nanoparticles have unique spectral and photophysical properties that make them suitable for development of theranostics for imaging and treating large and deep-seated tumors. Nanoparticles based on NaYF₄ crystals doped with lanthanides Yb³⁺ and Er³⁺ were obtained by the high-temperature decomposition of trifluoroacetates in oleic acid and 1-octadecene. Such particles have pronounced hydrophobic properties. Therefore, to obtain stable dispersions in aqueous media for the study of their properties in vivo and in vitro, the polyethylene glycol (PEG)-glycerolipids of various structures were obtained. To increase the circulation time of PEG-lipid coated nanoparticles in the bloodstream, long-chain substituents are needed to be attached to the glycerol backbone using ether bonds. To prevent nanoparticle aggregation, an L-cysteine-derived negatively charged carboxy group should be included in the lipid molecule.     

High sensitivity dual core photonic crystal fiber sensor for simultaneous detection of two samples

The optical control ability of photonic crystal fiber (PCF) is a distinctive property suitable for improving sensing and plasma performance. This article proposes a dual-core D-channel PCF sensor that can detect two samples simultaneously, which effectively solves the problems of coating difficulty and low wavelength sensitivity. The PCF has four layers of air holes, which dramatically reduces the optical fiber loss and is more conducive to the application of sensors in actual production. In addition, by introducing dual cores on the upper and lower sides of the central air hole, reducing the spacing between the core and the gold nanolayer, a stronger evanescent field can be generated in the cladding air hole. The optical fiber sensor can detect the refractive index of two samples simultaneously with a maximum sensitivity of 21300 nm/RIU. To the best of our knowledge, the sensitivity achieved in this work is the highest sensitivity with the dual sample synchronous detection sensors. The detection range of the refraction index is 1.35-1.41, and the resolution of the sensor is 4.695×10^-6. Overall, the sensor will be suitable for medical detection, organic chemical sensing, analyte detection, and other fields.