Self-assembled lipid nanotube hosts: The dimension control for encapsulation of nanometer-scale guest substances

Supramolecular nanotube hosts with precisely controlled inner or outer diameters have been synthesized by self-assembly of unsymmetrical bolaamphiphilic monomers or glucopyranosylamide lipids, respectively. Time-resolved fluorescent measurement using 8-anilinonaphthalene-1-sulfonate (ANS) as a probe revealed that the water confined in a cardanyl-β-D -glucopyranoside lipid nanotube has relatively lower solvent polarity corresponding to that of propanol than bulk water. Extensively developed hydrogen bond networks also characterize the confined water in comparison to the case in bulk water. Encapsulation ability of the glucopyranosylamide lipid nanotube has been examined by filling the lyophilized LNTs with gold or silver nanoparticles, ferritin, or magnetic crystals. Filling the unsymmetrical bolaamphiphile nanotube possessing positively charged inner surfaces with negatively charged polymer beads or ferritin proved to be successful without depending on capillary action. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5137–5152, 2006     

Effect of stoichiometry on liquid crystalline supramolecular polymers formed with complementary nucleobase pair interactions

We report herein studies on the liquid crystalline behavior of a series of supramolecular materials that contain different ratios of two complementary symmetrically-substituted alkoxy-bis(phenylethynyl)benzene AA- and BB-type monomers. One monomer has thymine units placed at either end of the rigid mesogenic core, while the other has N⁶-(4-methoxybenzoyl)-adenine units placed on the ends. Differential scanning calorimetric and polarized optical microscopy studies have been carried out on these systems. These studies show that the material's behavior is strongly dependent on its thermal history. As a result, the materials can exhibit, on heating, either a liquid crystalline phase, a crystalline phase, or the coexistence of crystalline and liquid crystalline regions. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5049–5059, 2006     

毛细管离子交换电色谱的分离行为

在离子交换毛细管色谱柱上实施电色谱，并对其分离行为进行了研究，采用７５μｍ（ｉ．ｄ．）２０ｃｍ的毛细管强阳离子交换柱（３μｍ）以ＮａＨ２ＰＯ４－Ｈ３ＰＯ４缓冲液为淋洗剂，紫外柱上检测（２１４ｎｍ）考察了流动相的ｐＨ值，有机改性剂及分离电压等因素对分离的影响，研究表明，不同的ｐＨ溶质的流出次序发生改变，随着有机改性剂含量增加，溶质的保留时间减小，而电渗流却增大，同时，对分离的柱效和方法的重现性进行了     

Synthesis of monodisperse poly(chloromethylstyrene-co-divinylbenzene) beads and their application in separation of biopolymers

The monodisperse, porous poly(chloromethylstyrene-co-divinylbenzene) beads of 7.9 microm were prepared by a single-step swelling and polymerization method. The seed particles prepared by dispersion polymerization exhibited good absorption of the monomer phase. Based on this media, a weak cation-exchange (WCX) stationary phase for HPLC was synthesized by a new chemically modified method. The prepared resin has advantages of biopolymer separation, high column efficiency, low column backpressure, high protein mass recovery, and good resolution for proteins. The dynamic protein-loading capacity of the synthesized WCX packings was 18.2 mg/g. Five proteins were separated in 3.0 min using the synthesized WCX stationary phase. The experimental results show that the obtained WCX resin has very weak hydrophobicity. The WCX resin was also used for the rapid separation and purification of lysozyme from egg white in 5.0 min with only one step. The purity and specific bioactivity of the purified lysozyme were found to be more than 93% and 70 245 U/mg, respectively.     

Catalysis of nucleophilic substitution reactions in supramolecular systems

The factors determining the catalytic effect of supramolecular systems on the nucleophilic substitution reactions are analyzed. The role of the structural and phase transitions of nanoaggregates in the catalytic mechanism are determined. The substrate specificity is shown for different structures of the supramolecular composition.     

纯硅MCM-41中孔分子筛合成因素的研究Ⅰ.Na~+、K~+阳离子对合成的影响

本文采用表面活性剂十六烷基三甲基溴化铵（Ｃ１６ＴＡＢｒ，以下为１６３１），在（Ｎａ，Ｋ）ＯＨＳｉＯ２Ｃ１６ＴＡＢｒＨ２Ｏ体系中分别利用室温、水热及干粉法进行了纯硅ＭＣＭ４１中孔分子筛的合成，考察了阳离子Ｎａ＋、Ｋ＋对ＭＣＭ４１合成及稳定性的影响。通过ＸＲＤ对结晶度的测定，发现ＮａＭＣＭ４１的晶化速率明显高于ＫＭＣＭ４１，而热稳定性和水热稳定性较差，且ａ０值小于后者。同时发现，就合成方法而言，室温法得到的产物具有很高的结晶度，利用水热法合成的样品的热稳定性明显较高，而干法得到的分子筛产品具有优良的水热稳定性。     

配合物形成的三维超分子体系—[Ni(C_6H_4O_2N)_2(H_2O)_4]的水热法合成、晶体结构及热分析

采用水热法用Ni(NO3)26H2O和异烟酸制备出了一种新的由配合物形成的三维超分子体系—[Ni(C6H4O2N)2(H2O)4],并通过X射线衍射对其晶体结构进行了测定。 该晶体属三斜晶系,空间群为Pī, 所得晶胞参数为: a = 6.9228(4), b = 9.6664(19),c = 6.322(1) , a = 96.86(3), b = 113.33(3), g = 110.35(3)°, V = 347.6(1) 3, Z = 1, Mr = 374.98, Dc = 1.791 g/cm3, F(000) = 194, m = 1.443 mm-1。用1362个可观察的 (I > 2s(I))衍射点,修正123个结构参数, 最终偏离因子R = 0.0444,wR = 0.1271。在组成该化合物的基本结构单元[Ni(C6H4O2N)2(H2O)4]中,Ni处于1个稍微拉长的八面体的中心; 各个结构单元之间通过氢键OH…O相互连接,形成了无限伸展的具有层状结构的三维超分子体系。 另外,从差热及热重曲线可以看出,该化合物加热到154 ℃时开始分解, 首先失去4个H2O,再失去2个异烟酸根,最后残余物为NiO。     

Supramolecular structures of macromolecules containing bipyridine–copper(I) complexes as revealed from transmission electron microscopy studies

Transmission electron microscopy (TEM) studies on bipyridine (bpy) containing block copolymer systems showed the formation of nanoscopic polymer–ion complexes through complexation with copper(I) ions which segregated to highly ordered columnar domains of mesoscopic dimensions. The domains, i.e. stacks of [(bpy)₂Cu(I)] complex moieties could be visualized by complementary TEM techniques. First, electron energy loss spectra (EELS) showed the absorption edges of copper and nitrogen, which are specific for the bipyridine copper complexes. The element spectroscopic imaging (ESI) technique allowed the imaging of the net copper and net nitrogen distribution, and the coinciding pictures exhibited a microphase separated system in the case of a 3-block copolymer with complexed end segments. High resolution elastic bright field images showed interference lines with a line to line distance of about 8 A which could be related to the Cu–Cu distance in staggered Cu(I)–bipyridine complexes. Received: 6 August 1997 Accepted: 28 April 1998