Kinetics of Hydroperoxide Epoxidation of 1-Octene in the Presence of MoB2

We have studied the kinetics of the process of epoxidation of 1-octene by tert-butyl hydroperoxide in the presence of molybdenum boride MoB₂. We have studied the effect of the concentrations of starting materials and reaction products on the process. We suggest a kinetic scheme and we calculate the kinetic parameters of the process.     

Sm2O3对Ni/海泡石催化剂的改性研究

采用浸渍法制备了一系列的Ni-Sm/海泡石催化剂，以二氧化碳甲烷化为探针反应，TPR，XPS及CS2中毒为手段，研究了Sm2O3对Ni/海泡石催化剂的改性机制。结果表明，Sm2O3的加入提高了Ni/海泡石催化剂的加氢活性和抗毒能力，增加了表面镍原子的分散度及催化剂的活性原子数；Sm2O3的影响既有电子效应，又有几何效应，但以电子效应为主。     

SYNTHESIS AND CATALYTIC PROPERTY OF POLYSTYRENE SUPPORTED PHENYLALANINE SCHIFF BASE COMPLEX OF Mn（Ⅱ） IN AEROBIC OXIDATION OF CYCLOHEXENE

The polystyrene supported phenylalanine Schiff base complex of Mn(Ⅱ)(PS-Sal-Phe-Mn)was prepared with chloromethylated styrene polymer beads, 2,4-dihydroxybenzaldehyde,L-phenylalanine and manganese(Ⅱ)acetate tetrahyrate., The polymeric ligand and the complex were characterized by FT-IR,, small area X-ray photoelectron spectroscopy(XPS), and ICP-AES. In the presence of the manganese complex, cyclohexene(1)was effectively oxidized by molecular oxygen without reductant. The major products of the reaction were 2-cyclohexen-1-ol(2),2-cyclohexen-1-one(3)and 2-cyclohexen-1- hydroperoxide(4), which was different with typical oxidation of cyclohexene. The influence of reaction temperature and additive for oxidation had been studied. The selectivity of 2-cyclohexen-l-hydroperoxide varied with reaction time and different additives. The mechanism of cyclohexene oxidation had also been discussed.     

New process to control hydrolysis step during sol-gel preparation of sulfated zirconia catalysts

Sulfated zirconia catalysts were prepared by sol-gel process using a new method allowing the control of the hydrolysis step of zirconium alkoxides. Prepared samples were characterized by N₂ adsorption (desorption) at 77 K, XRD, chemical analysis of total sulfur and XPS. Catalytic properties have been evaluated in n-butane and n-hexane isomerization reactions. Obtained results show that time necessary for gelation is significant and depends considerably on the nature of the zirconium precursor. Concerning the properties of the solids obtained by this method, it has been noted that the use of the zirconium propoxide led to a better retention of the sulfate species, which improves activity during isomerization reactions. It has been found also that an initial S/Zr molar ratio equal to 0.5 allowed to obtain an optimal sulfur content and a high specific surface area.     

Additive telluromolybdates. Structure and catalysis in oxidation

Additive telluromolybdates, MoO₃·2TeO₂ and M^IIO·TeO₂·MoO₃ (M^IITeMoO₆; M^II = Co, Mn, Zn), converted ethyl lactate selectively to pyruvate in a vaporphase fixedbed flow system at 250–300 °C. A synergy in activity was observed for binary TeO₂–MoO₃, and crystalline Te₂MoO₇ was suggested as the active species. The Rietveld analysis of powder XRD patterns of ternary CoTeMoO₆ revealed the layer structure quite different from that of the reference Te₂MoO₇, but tellurium was again located adjacent to molybdenum linked through lattice oxygen.     

Insoluble polystyrene-bound quaternary onium salt catalysts for the synthesis of cyclic carbonates by the reaction of oxiranes with carbon dioxide

The addition reaction of oxiranes ( 26a—e ) with carbon dioxide (CO₂) was performed using insoluble polystyrene beads containing pendant quaternary ammonium or phosphonium salts as catalysts under atmospheric pressure. The reaction of 26a—e with CO₂ proceeded smoothly catalyzed by 1–2 mol % of the polymer-supported quaternary onium salts to give the corresponding cyclic carbonates ( 27a—e ) in high yields at 80–90°C. In this reaction system, the catalytic activity of the polymer-supported quaternary onium salts was strongly affected by the following factors: degree of ring substitution (DRS) of the onium salt residues to the polymer, degree of crosslinking (DC) of the polystyrene beads, chain length of the alkylene spacer between the polymer back-bone and the onium salt, hydrophobicity of the alkyl group on the onium salts, and kind of onium salts. That is, the polymer-supported quaternary phosphonium salts with low DRS and DC and with long alkylene spacer chain were found to have higher catalytic activity than low molecualr weight quaternary onium salts. The above polymer-supported catalysts can easily be separated at the end of a reaction by filtration and can be reused for at least seven runs. It was also found that the rate of reaction was proportional to the products of catalyst concentration and oxirane concentration. © 1993 John Wiley & Sons, Inc.     

以有机镍配合物为前体制备担载镍催化剂的研究

描述了以镍单核配合物ＮｉＣｐ２和簇合物Ｎｉ３Ｃｐ３Ｎ－ｔ－Ｃ４Ｈ９为前体的ＳｉＯ２载镍催化剂的制备，通过元素分析、ＴＲＲ、ＴＰＤＥ、ＸＰＳ，ＣＯ吸附和苯加氢反应对以镍配合物和簇合物为前体制备的催化剂的性能及其制备过程了研究和表征。结果表明，镍与合物和簇合物在担载过程中同载体ＳｉＯ２表面发生了相互作用，其化学组成发生了变化，在苯加氢反应中，此催化剂的活性比以Ｎｉ（ＮＯ３）２为前体制备的催化剂高得多，     

Pd(PPh3)2Cl2-CuCl体系催化有机高价碘杂环化合物与末端炔烃的化学选择性交叉偶联反应

以有机高价碘杂环化合物1,2为底物,在Pd(PPh3)2Cl2-CuCl催化剂存在下与末端炔烃进行交叉偶联反应,实验发现该反应为--化学选择性反应,控制反应体系的物料比、温度及反应时间可以分别得到单偶联或双偶联产物,从而证实了有机高价碘杂环化合物的碘盐在进行交叉偶联反应时的反应活性比sp2的碘化物高.     

高活性的茂基钛配合物／正丁基锂加氢催化体系的研究

考察了茂环上不同取代基及钛上阴离子配体对茂基钛配合物／正丁基锂催化体系加氢活性和稳定性的影响。在充分发挥该体系催化活性的条件下，由配合物Ｃｐ２ＴｉＣｌ２、Ｃｐ２ＴｉＦ２和Ｃｐ２Ｔｉ［ＯＣ６Ｈ３（ＣＨ３－２）Ｃｌ－４］２组成的催化体系对辛烯－１加氢的最高活性（或初活性）达到４６￣５８ｓ＾－１。