Chemical conversion of various celluloses to glucose and its derivatives in supercritical water

The supercritical water biomass conversion system was designed and developed in our laboratory. The reaction vessel with cellulose sample was treated with this system at supercritical state of water for a designated period (3–105s) under the conditions of a tin bath temperature of 500°C and pressure of 35MPa. The recovered products of hydrolysates were then analyzed by high performance liquid chromatography. The obtained results indicated that a high amount of glucose and levoglucosan can be achieved from both celluloses I and II for 5–10s supercritical treatment, while that from starch for 3–5s treatment. Although this difference could be due to a difference in the molecular structure between cellulose and starch, a difference between celluloses I and II was not significant. Instead, an accessibility of the water towards cellulose molecules seemed to be significant for their chemical conversion. With the longer treatment, amounts of these compounds observed were decreased due to decomposition. Therefore, it may be concluded that, compared with acid hydrolysis or enzymatic saccharification, cellulose may be hydrolyzed to glucose and its derivatives more or less to the same degree as in corn starch under supercritical state. This finding suggests that the supercritical treatment can overcome the difficulties in hydrolyzing cellulose to glucose, found in the acid hydrolysis or enzymatic saccharification techniques.     

CO在Pd／ZrO2—Al2O3催化剂上表面反应性能的研究

用流动反应法和ＴＰＳＲＭＳ等技术研究了ＣＯ在Ｐｄ／γＡｌ２Ｏ３和含有ＺｒＯ２的催化剂上的吸脱附行为、表面反应及催化氧化活性，同时用ＸＲＤ技术测定了催化剂的物相结构。结果表明，在Ｐｄ／γＡｌ２Ｏ３催化剂中用浸渍法添加ＺｒＯ２或掺杂超细ＺｒＯ２后，催化剂的氧化活性均有明显提高；ＣＯＴＰＳＲ的实验结果表明，ＣＯ在氧化态Ｐｄ催化剂上程序升温脱附过程中主要与表面氧发生氧化反应，而在还原态Ｐｄ催化剂上发生歧化反应，并发现ＣＯ２的脱附量及脱附峰温次序与对ＣＯ的氧化活性有一致的对应关系。     

固载Ru基催化剂上二氧化碳加氢合成甲酸Ⅱ反应条件对催化剂性能的影响

The synthesis of formic acid from carbon dioxide and hydrogen using a silica immobilized ruthenium catalyst as precursor has been studied in different reaction conditions. The results revealed that the TOF （turn over frequency） of HCOOH achieved 1481.5 h^-1 on immobilized ruthenium catalyst near the critical pressure point of CO2 with H2 pressure of 4.0 MPa, reaction temperature of 80℃ and PPh3/Ru molar ratio of 6：1. The reaction activity of immobilized catalyst was higher than that of homogeneous catalyst, and the immobilized catalyst also offered the practical advantages such as easy separation and reuse.     

水汽对TiO_2上CO光催化氧化反应的影响

在室温、杀菌灯照射下 ,对“氧化的”TiO2 催化剂上CO光催化氧化反应进行了研究 ,发现当原料气中加入分压为 3.36kPa水汽时 ,光催化氧化CO的活性明显降低 .这可能是由于杀菌灯照射下TiO2 表面生成的O-(a) 或O(a) 与H2 O反应生成·OH ,降低了表面的O-(a) 和O(a) 的浓度 ,而生成的·OH不能使CO氧化 ,从而降低了氧化CO的能力     

杂原子B—ZSM—35沸石的干法合成,表征及CO＋H2反应性能的研究

首次利用吸附态模板剂在Ｎａ２Ｏ－ＳｉＯ２－Ｂ２Ｏ３－ＤＥＡ干粉体系中合成了杂原子Ｂ－ＳＺＭ－３５沸石，ＸＲＤ，ＳＥＭ，ＩＲ，及ＣＯ加氢反应研究了其物理化学特性。结果表明，Ｂ原子同晶取代Ａｌ原子进入ＺＳＭ－３５沸石骨加。     

Oxidation of n-Butanol and 2-Pentanol with Molecular Oxygen in Supercritical CO2

Oxidation of n-butanol and 2-pentanol using molecular oxygen in supercritical (SC) CO2 with and without co-solvent is investigated. The results showed that the reaction selectivity is high when the reaction is carried out in SC CO2. It has been observed that co-solvent affects conversion and selectivity of the reaction considerably.     

色谱技术在中药指纹图谱研究中的应用

 介绍了气相色谱、高效液相色谱、超临界流体色谱和高速逆流色谱等几种色谱技术在中药指纹图谱研究中的应用现状,以及使用模糊聚类分析和人工神经网络分析指纹图谱对中药进行模式识别和质量鉴定的方法。     

酚酞型聚芳醚砜(Ⅶ):K_2C0_3存在下PP/DCDPS体系聚合反应机理的研究

利用~(13)C-NMR方法研究了弱碱K_2CO_3存在下酚酞成盐反应及其与活性双卤砜亲核缩聚反应过程中的结构特征。对一系列碱性条件下酚酞(PP)与4,4'-二氯二苯砜(DCDPS)的缩聚反应的研究表明任何影响内酯结构酚酞盐生成的因素都会严重阻碍聚合反应的进行。对模型化合物存在下K_2CO_3在极性非质子溶剂中的溶解/解离行为的研究结果表明酚酞类Card。双酚与固体K_2CO_3之间可能存在着一种特殊的络合作用。基于我们系列研究结果,本文中总结提出了弱碱K_2CO_3存在下酚酞的反应机理。     

CexTi1-xO2复合氧化物的结构及负载CuO对NO还原性能研究

采用共沉淀法制备了不同摩尔比(x=0,0.1,0.2～0.9,1.0)的CexTi1-xO2复合氧化物,考察了CuO/CexTi1-xO2对NO+CO反应的活性,并用BET,TPR和XRD等技术对各试样进行了表征。结果表明,试样的结构和还原特性随焙烧温度变化而变化。XRD检测表明,x值从0.1增加到0.5时,650℃焙烧的试样已形成了CeTi2O6物相,且主要以无定形状态存在;试样经800℃焙烧后晶化完全;x>0.6时,一些TiO2已经进入了CeO2晶格,形成了Ce Ti固溶体。催化剂活性评价表明CuO/CexTi1-xO2(650℃)对NO+CO反应具有较好的活性,其活性随x值变化而变化。TPR及XRD结果表明CuO与CeTi2O6之间存在很强的相互作用,CeTi2O6物相的形成使CuO的还原峰温由380℃提前到200℃,而CuO的存在又促进CeTi2O6的还原峰温从600℃提前至200～300℃。     

Natriumkomplexe mit Salicylideniminen: Synthesen,Strukturen, CO2‐Aufnahme und Carboxylierung von 2‐Fluorpropiophenon bzw. Estronmethylether

Chiral salicylidenphenethylamines (R)‐HA or (S)‐HA , 2‐salicylidenfurfuryl‐imines HB , and 2‐salicylidenaminoethanol HC react with sodium hydride or sodium hexamethyldisilylamide to form the sodium complexes [Na(R)‐A] ₄ · 0,5 Et ₂ , [Na(S)‐A] ₄ · 0,5 Et ₂ O (1) , [NaB] ₄ · 0,5 Ph‐Me (2) and [(dme)NaC] ₄ (3) . In the presence of 18‐crown‐6 the complex [Na(18‐crown‐6)(thf) ₂ ] ₂ [Na ₂ (C)] ₄ · THF (4) can also be isolated. The crystal structure analyses of both 1 and 2 show that heterocubane structures with a Na₄O₄ frame work are formed. Additionally, the imine nitrogen atom is bonded at the Na atom which has the coordination number 4 in 1 . Additional coordination of the furfuryl oxygen atom results in the coordination number five for the sodium atom in 2 . In 3 which is also a tetramer, two Na₂O₂ units are connected via two imino‐ethanol bridges Na(1)‐N(=CH‐phenolat)‐CH₂CH₂‐OH‐Na(2A). The crystal structure analysis displays that 4 is an ionic compound consisting of two [(thf)₂Na(18‐crown‐6)]⁺ cations and the dinuclear dianion [Na ₂ (C) ₄ ] ^2? . Both 1 and 2 are carboxylation reagents which transfer CO₂ to 2‐fluoropropiophenone. 1 is more active than 2 , but 3 and 4 are inactive.