Rapid Mo(CO)6 catalysed one-pot deoxygenation of heterocyclic halo-benzyl alcohols with Lawesson’s reagent

A fast and efficient microwave promoted one-pot method for deoxygenation of heterocyclic halo-benzyl alcohols has been developed. The method does not cause dehalogenation of the substrates and provides the deoxygenated products in high yield after only 30 min.     

Impact of electron-electron interaction on the electron energy distribution function in molecular plasmas under rf field action

Calculations of the electron energy distribution and of relevant macroscopic quantities of collision-dominated, weakly ionized plasmas under rf field action have been performed with increasing degrees of ionization, and the impact of the electron-electron interaction on these quantities was determined. The investigations were performed for the gas plasmas in CO and H₂ as representatives of molecular plasmas The energy distribution and macroscopic quantities are obtained by solving the nonstationary Bolizmann equation for a given rf field and degree of ionization taking into accoung and additional Fokker-Planck term besides the collision integrals for the elastic and the main inelastic collision processes. In these molecular plasmas a remarkable impact of the electron-electron interaction connected with increasing Maxwellization is observed for degrees of ionization greater than 10.     

Kinetic Analysis of the Mechanism of Oxidation of CO on Co/ZSM-5

We have studied the kinetic behavior of oxidation of carbon monoxide on Co-containing zeolite ZSM-5. We have shown that the kinetic curves obtained for the dependence of the reaction rate on the reagent concentration can be described by an Eley–Rideal mechanism, which assumes that oxygen can be adsorbed on the surface of the catalyst in both atomic and molecular form, followed by reaction of CO from the gas phase with the adsorbed oxygen.     

Topological properties of the electronic density of CO-MgF2 and OC-MgF2 adducts

By means of Bader's approach on topological properties of the electronic density, the major stability of the O-bonded adduct over the C-bonded one between MgF₂ and CO is reinforced.     

CO Oxidation on Cu/MgO-SiO2 Sol-Gel Derived Catalysts

Sol-gel Cu//MgOSiO₂ catalysts were prepared gelling tetraethoxysilane (TEOS), magnesium ethoxide and copper acetylacetonate at pH 3 and pH 9. The catalysts shown specific surface areas ca. 500 m²/g and 140 m²/g for pH 9 and pH 3 preparations respectively. Si(OH) and Si(OH)₂ hydroxy groups were observed by MAS-RMN spectroscopy in both preparations. CO₂-TPD and NH₃-TPD desorption thermograms showed that acid and basic sites were formed on the catalysts surface. It has been found that the catalysts having the highest density of basic sites were the catalysts showing the highest activity for the CO oxidation. It is proposed that the catalytic activity depends of the relative Cu⁼¹/Cu⁼² stability given by the support acidity.     

Hydrogen analysis in solid samples by utilizing He metastable atoms induced by TEA CO2 laser plasma in He gas at 1 atm

A TEA CO₂ laser (350 mJ–1.5 J, 10.6 μm, 200 ns, 10 Hz) was focused onto a metal sub-target under He as host gas at 1 atmospheric pressure with a small amount of impurity gas, such as water and ethanol vapors. It was found that the TEA CO₂ laser with the help of the metal sub-target is favorable for generating a strong, large volume helium gas breakdown plasma at 1 atmospheric pressure, in which the helium metastable-excited state was then produced overwhelmingly. While the metal sub-target itself was never ablated. The helium metastable-excited state produced after the strong helium gas breakdown plasma was considered to play an important role in exciting the atoms. This was confirmed by the specific characteristics of the detected H emission, namely the strong intensity with low background, narrow spectral width, and the long lifetime. This technique can be used for gas and solid samples analysis. For nonmetal solid analysis, a metal mesh was introduced in front of the nonmetal sample surface to help initiation of the helium gas breakdown plasma. For metal sample, analysis can be carried out by combining the TEA CO₂ laser and an Nd–YAG laser where the Nd–YAG laser is used to ablate the metal sample. The ablated atoms from the metal sample are then sent into the region of helium gas breakdown plasma induced by the TEA CO₂ laser to be excited through the helium metastable-excited state. This technique can be extended to the analysis of other elements, not limited only to hydrogen, such as halogens.     

Pt羰基簇合物在NaY内的合成机理

利用IR，EXAFS, ~(13)CO同位素交换反应及与NO作用等手段研究了Pt羰基簇合物[Pt_3(CO)_6]~(2-)_n(n＝3,4)在NaY分子筛超笼内的合成机理．在氧化样品Pt~(2+)/NaY上300－373 K的还愿羰基化过程中，首先Pt~(2+)与CO反应生成PtO(CO)物种(波数σ_(CO)＝2110 cm~(-1))，然后聚集成“Pt_3(CO)_6”(σ_(CO)＝2112，1896和1841 cm~(-1))，最后生成深绿色的Pt羰基簇合物Pt_(12)(CO)_(24)]~(2-)/NaY(σ_(CO)＝2080，1824 cm~(-1))．“Pt_3(CO)_6”的羰基在室温下能迅速地与~(13)CO发生交换，而[Pt_3(CO)_6]~(2-)_n(n＝3,4)的羰基与~(13)CO的同位素交换即使在343 K也进行得很慢，室温下，NO能逐步破坏Pt羰基簇合物的层间和层内Pt－Pt键，得到中间物种“Pt_3(CO)_6”和PtO(CO)，同时在气相产生CO_2和N_2O．而由上述两中间物种出发，300－353 K温度下，在CO气氛中的还原羰基化又能可逆地得到原羰基簇合物．     

探究Cu/ZnO相互作用对CO2加氢制甲醇反应性能的影响

Using renewable green hydrogen and carbon dioxide (CO₂) to produce methanol is one of the fundamental ways to reduce CO₂ emissions in the future, and research and development related to catalysts for efficient and stable methanol synthesis is one of the key factors in determining the entire synthesis process. Metal nanoparticles stabilized on a support are frequently employed to catalyze the methanol synthesis reaction. Metal-support interactions (MSIs) in these supported catalysts can play a significant role in catalysis. Tuning the MSI is an effective strategy to modulate the activity, selectivity, and stability of heterogeneous catalysts. Numerous studies have been conducted on this topic; however, a systematic understanding of the role of various strengths of MSI is lacking. Herein, three Cu/ZnO-SiO₂ catalysts with different strengths of MSI, namely, normal precipitation Cu/ZnO-SiO₂ (Nor-CZS), co-precipitation Cu/ZnO-SiO₂ (Co-CZS), and reverse precipitation Cu/ZnO-SiO₂ (Re-CZS), were successfully prepared to determine the role of such interactions in the hydrogenation of CO₂ to methanol. The results of temperature-programmed reduction (H₂-TPR) and X-ray photoelectron spectroscopy (XPS) characterization illustrated that the MSI of the catalysts was considerably affected by the precipitation sequence. Fourier transform infrared reflection spectroscopy (FT-IR) results indicated that the Cu species existed as CuO in all cases and that copper phyllosilicate was absent (except for strong Cu-SiO₂ interaction). Transmission electron microscopy (TEM), X-ray diffraction (XRD), and N₂O chemical titration results revealed that strong interactions between the Cu and Zn species would promote the dispersion of Cu species, thereby leading to a higher CO₂ conversion rate and improved catalytic stability. As expected, the Re-CZS catalyst exhibited the highest activity with 12.4% CO₂ conversion, followed by the Co-CZS catalyst (12.1%), and the Nor-CZS catalyst (9.8%). After the same reaction time, the normalized CO₂ conversion of the three catalysts decreased in the following order: Re-CZS (75%) > Co-CZS (70%) > Nor-CZS (65%). Notably, the methanol selectivity of the Re-CZS catalyst was found to level off after a prolonged period, in contrast to that of Co-CZS and Nor-CZS. Investigation of the structural evolution of the catalyst with time on stream revealed that the high methanol selectivity of the catalyst was caused by the reconstruction of the catalyst, which was induced by the strong MSI between the Cu and Zn species, and the migration of ZnO onto Cu species, which caused an enlargement of the Cu/ZnO interface. This work offers an alternative strategy for the rational and optimized design of efficient catalysts.     

Optimisation of Supercritical Carbon Dioxide Systems for Complexation of Naproxen : Beta-Cyclodextrin

Supercritical carbon dioxide (scCO₂)offers several attractive scenarios for thepharmaceutical processing as an alternativeto aqueous and organic solvents. In thiswork naproxen, a widely used non steroidalanti-inflammatory drug with analgesic andanti-inflammatory properties, was chosenas a model drug. Its complexation with cyclodextrinsimproves the rate and extent of dissolutionof the drug, increase its rate of absorption and mayreduce the unpleasant side-effects of the drug.The interest in using this supercritical technologyled us to develop an experimental unit for the useof supercritical CO₂ as a processing medium forthe complexation of naproxen with beta cyclodextrin (CD).     

Preparation and characterization of trans-RhCl(CO)(TPPTS)2-intercalated layered double hydroxides

trans-RhCl(CO)(TPPTS)₂ (TPPTS=tris(m-sulfonatophenyl)phosphine) has been intercalated into Zn-Al layered double hydroxides (LDHs) by the method of ion exchange. The structure, composition and thermal stability of the composite material have been characterized by powder X-ray diffraction, Fourier transform infrared and ³¹P solid-state magic-angle spinning nuclear magnetic resonance spectroscopy, elemental analysis, thermogravimetry, and differential thermal analysis. The geometry of trans-RhCl(CO)(TPPTS)₂ was fully optimized using the PM3 semiempirical molecular orbital method, and a schematic model for the intercalated species has been proposed. The thermal stability of trans-RhCl(CO)(TPPTS)₂ is significantly enhanced by intercalation, which suggests that such materials may have prospective application as the basis of a supported catalyst system for the hydroformylation of higher olefins.