还原氧化石墨烯@泡沫镍载CoO纳米花电极制备及催化CO2性能

本文以氧化石墨烯包覆泡沫镍电极(GO@NF)作为基底,采用水热法在GO@NF基底上原位生长CoO纳米花,同时GO在水热过程中被同步热还原为还原氧化石墨烯(RGO),从而一步制得还原氧化石墨烯包覆泡沫镍负载CoO纳米花电极(CoO/RGO@NF)。使用XRD和SEM对CoO/RGO@NF电极进行表征,发现CoO纳米花均匀生长在泡沫镍三维网络结构上,CoO纳米花为大量针状纳米棒围绕一个中心而成的花状结构,纳米棒的长度约为10 ~ 15 μm,直径约为100 ~ 200 nm。使用循环伏安和线性扫描法测试了CoO/RGO@NF电极电催化CO₂的还原性能,在-0.76 V（vs. SHE）电位下,CoO/RGO@NF电极电催化CO₂还原的电流效率达到70.9%,产甲酸法拉第效率达到65.2%,甲酸产率为59.8 μmol·h^-1·cm^-2,且电极可持续稳定电催化还原CO₂ 4 h,表明CoO/RGO@NF电极对CO₂电还原有着优良的催化活性、选择性和稳定性。     

Mn-Fe_2O_3载氧体作用下CO化学链燃烧特性及动力学研究

采用共沉淀法制备不同物质的量比Mn掺杂的铁基载氧体(Mn-Fe2O3),并进行XRD、BET和TEM表征。开展不同温度下Mn-Fe2O3与CO的化学链燃烧实验,研究载氧体的反应特性,确定较优的掺杂量和反应温度。结果表明,适量的Mn掺杂有助于改善铁基载氧体的反应活性,Fe∶Mn物质的量为50∶1时燃烧反应转化率最高。多循环化学链燃烧实验证实了载氧体稳定性较好。不同升温速率(30、40、50℃/min)下反应动力学分析表明,Mn-Fe2O3与CO的化学链燃烧还原反应均属于随机成核和随后生长的Avrami-Erofeev方程模型,并依据模型分别计算出了该模型的活化能和频率因子。     

CO2-3掺杂纳米羟基磷灰石晶体的合成与表征

CO2-3掺杂是提高纳米羟基磷灰石（n-HA）生物活性的有效方法之一。以 Ca（NO3）2·4H2O 和Na3PO4·12H2O为主要原料，Na2CO3作为CO2-3来源，合成纳米碳羟基磷灰石（n-CHA）晶体。采用TEM ， XRD ，FTIR ，RS对合成晶体形貌和结构进行表征。结果表明：合成的n-HA晶体长度约为60～80 nm ，宽度在20～30 nm之间，形状为针状，具有良好的结晶度，与自然骨磷灰石形貌相似；n-CHA晶体随CO2-3掺入量的增加，结晶度降低；合成的 n-CHA晶体的晶胞参数 a值随着CO2-3加入量的增大不断收缩，但 c值增大，参数比c/a值增大，符合B型取代（取代PO3-4）的晶胞参数变化规律。红外谱图中，872 cm -1附近出现AB混合型取代（同时取代O H -，PO3-4）的CO2-3面外弯曲振动特征红外峰，同时CO2-3的不对称伸缩振动红外峰在1454和1420 cm -1附近出现分裂峰，1540 cm -1附近出现弱CO2-3峰；1122 cm -1附近出现CO2-3对称伸缩振动拉曼峰，1071 cm -1附近出现CO2-3的B型替代特征拉曼峰，通过计算PO3-4，CO2-3，O H -拉曼峰的积分面积比PO3-4/CO2-3，O H -/CO23，PO3-4/O H -，表明CO2-3在替换时，先以B型为主，随着CO2-3掺入量的增加，发生A型替代（取代O H -）。实验结果表明，合成的磷灰石晶体为B型取代（取代PO3-4）为主的AB混合型取代的 n-CHA。与人骨磷灰石晶体在形态、尺寸、晶体结构和生长方式上具有相似性，可称为类骨磷灰石。     

Planar Tetracoordinate Silicon in Organic Molecules As Carbenoid-Type Amphoteric Centers: A Computational Study

Designing and synthesizing a stable compound with a planar tetracoordinate silicon (ptSi) center is a challenging goal for chemists. Here, a series of potential aromatic ptSi compounds composed of four conjugated rings shared by a centrally embedded Si atom are theoretically designed and computationally verified. Both Born–Oppenheimer molecular dynamics (BOMD) simulations and potential energy surface scannings verify the high stability and likely existence of these compounds, particularly Si-16-5555 (SiN₄C₈H₈) with 16 π electrons, under standard ambient temperature and pressure. Notably, the Hückel aromaticity rule, which works well for single rings, is inconsistent with the high stability of Si-16-5555 where the 16 p electrons are spread over four five-membered rings fused together. Bonding analyses show that the strong electron donation from the peripheral 12-membered conjugated ring with 16 π electrons to the vacant central atomic orbital Si 3p_z leads to the stabilization for both the ptSi coordination and planar aromaticity. The partial occupation of Si 3p_z results in the peculiar carbenoid-type behaviors for the amphoteric center. By modulating the electron density on the ring with substituent groups, we can regulate the nucleophilic and electrophilic properties of the central Si.     

室温快速合成Ag基金属有机骨架材料用于电催化还原CO2

选择具有强给电子能力的1,2,4-三唑为配体,成功合成了银基金属有机骨架材料(Ag-MOF)并用于电催化还原CO₂反应(CO₂RR)。借助粉末X射线衍射、透射电子显微镜、扫描电子显微镜、计时电流法等表征手段对材料的晶体结构、形貌和电催化CO₂RR性能进行了系统的研究。与商品化的纳米Ag颗粒对比,Ag-MOF展现出更优异的电催化CO₂RR产物选择性、催化活性和稳定性,在-0.9 V (vs RHE)时,CO的法拉第效率高达96.1%。当电压为-1.1 V (vs RHE)时,电流密度可达17 mA·cm^-2,且电极可以稳定运行300 min。这说明通过选择合适的配体结构,可以改变催化位点周围的化学环境,从而高效将CO₂转化为目标产物。     

Non-catalytic condensation of aromatic aldehydes with aniline in high temperature water

Abstract

The synthesis of diamino triphenyl methanes from aniline and aromatic aldehydes was conducted in near critical water and supercritical water. The reaction parameters, such as temperature, density, and reaction time, have been studied. Significant acceleration of the condensation reaction of aniline and aromatic aldehydes can be achieved by using high temperature water, especially near the critical point, in the absence of any acid catalysts. It has been demonstrated that high temperature water act effectively in the place of conventional acid catalysts.