超临界二氧化碳中卟啉与钴(II)、镍(II)、锌(II)配合物反应动力学

用紫外-可见光谱研究了钴(II)、镍(II)、锌(II)的1, 1, 1, 5, 5, 5-六氟-2, 4-戊二酮-二水配合物[M(hfac)2(H₂O)₂, M=Co、Ni、Zn]与5, 10, 15, 20-四(五氟苯基)卟啉[H2tpfpp]在超临界二氧化碳中反应生成金属卟啉[M(tpfpp)]的反应动力学. 在金属配合物大大过量时, 反应对卟啉为一级. 其表观一级速率常数随钴(II)、镍(II)配合物的浓度增加先增加、而后趋于稳定, 而表观一级速率常数随锌(II)配合物的浓度增加线形增加. 根据实验事实, 讨论了反应的机理, 得到了相应的热力学和动力学参数.     

室温CO催化氧化反应动力学的研究

本文采用无梯度反应器,考察了纳米金催化剂以及其它商品化的催化CO氧化催化剂,在不同CO浓度下催化CO氧化反应的转化率和反应速率,证明在CO初始浓度从ppm到pct数量级范围内,纳米金催化剂具有最好的催化CO室温转化的能力.     

废弃生物质在超临界水中转化制氢过程的研究

以废弃生物质转化为富氢气体为目的，使用间歇式超临界水反应器，在反应温度773 K～923 K、压力15.5 MPa～34.5 MPa停留时间1 min～30 min和Ca/C摩尔比0～0.56范围内，对木屑在超临界水条件下生成的气体组成及产率进行了考察。实验表明，Ca/C摩尔比和温度对木屑转化的影响较大。当Ca/C摩尔比为0.48时，碳的气体转化率和氢气产率提高了近一倍。温度从773 K提高到923 K，碳的气体转化率由47％提高到76％，氢气产率由4.5 mmol/g上升到6.9 mmol/g。与温度相比，停留时间和压力的影响不大。     

负载Pt,Pd催化剂上NO—TPD和NO催化还原性能

负载Ｐｔ、Ｐｄ催化剂上ＮＯ－ＴＰＤ和ＮＯ催化还原性能１）钟依均（浙江师范大学化学系金华３２１００４）罗孟飞周碧袁贤鑫（杭州大学催化研究所杭州３１００２８）关键词负载Ｐｔ、Ｐｄ催化剂ＮＯ－ＴＰＤＣＯ－ＮＯ反应分类号Ｏ６４３．３２氮氧化物（ＮＯｘ）污染是...     

Surface modification of γ-alumina membranes by silane coupling for CO2 separation

Top layers of γ-Al₂O₃ composite membranes have been modified by the silane coupling technique using phenyltriethoxysilane for improving the separation factor of CO₂ to N₂. The separation efficiency of the modified membranes was strongly dependent upon the hydroxylation tendency of the support materials and the amount of the special functional group (i.e. phenyl radical) which was coupled onto a top layer. The separation factor through the TiO₂ supported γ-Al₂O₃ membrane was found to be fairly enhanced by silane coupling, but in case of the -Al₂O₃ supported membrane was not. The CO₂/N₂ separation factor through the modified γ-Al₂O₃/TiO₂ composite membrane is 1.7 at 90°C and ΔP = 2 × 10⁵ Pa for the binary mixture containing 50 vol% CO₂. The separation factor is proportional to the CO₂ concentration in the gas mixture, and the modified membrane is stable up to 100°C. The main mechanism of the CO₂ transport through the modified γ-Al₂O₃ layer is known to be a surface diffusion.     

Characterization of Pt-Ru/C catalysts by X-ray absorption spectroscopy and temperature-programmed surface reaction

X-ray absorption spectroscopy (XAS) was employed to characterize carbon black supported Pt-Ru catalysts, which are commercially available to be utilized as the anode of polymeric-electrolyte-membrane fuel cells. Both Pt and Ru were found partially oxidized in the as-received form. Upon exposure to hydrogen at room temperature, the catalysts were completely reduced to the metallic state. The bimetallic nanoparticles on the Pt-Ru/C catalysts possess an inner core enriched in Pt, which is surrounded by a Ru-rich outer shell. Such a core–shell structure retained even at an elevated reduction temperature of 623 K. Temperature-programmed surface reaction (TPSR) was carried out to explore the reactivity of adsorbed CO toward hydrogen on various catalysts. Both the peak temperature of the TPSR profile and the amount of methane generated during the course of TPSR were sensitive to the surface composition of Pt–Ru nanoparticles. In combination of XAS and TPSR results, a slight difference in the nanostructure between two Pt-Ru/C catalysts was manifested.     

Zirconia supported La, Co oxides and LaCoO3 perovskite: structural characterization and catalytic CO oxidation

ZrO₂-supported La, Co oxide catalysts with different La, Co loading (2, 6, 8, 12 and 16 wt.% as LaCoO₃) were prepared by impregnation of tetragonal ZrO₂ with equimolar amounts of La and Co citrate precursors and calcination at 1073 K. The catalysts were characterized by X-ray diffraction (XRD), X-ray absorption spectroscopy (XAS), and BET specific surface area determination. Catalytic CO oxidation was performed at 298–800 K. XRD revealed the presence of tetragonal zirconia with traces of the monoclinic phase. LaCoO₃ perovskite was also detected for loading higher than 6%. XAS experiments suggested that at high loading LaCoO₃ and Co₃O₄ were formed, while at low loading, La, Co oxide species interacting with support, and hard to be structurally defined, prevailed. The catalysis study evidenced that the catalytic activity was due to segregated and highly dispersed cobalt oxide species.     

聚苯胺/二氧化钛复合薄膜的制备及其气敏性能

室温条件下, 运用静电力自组装和原位化学氧化聚合相结合的方法制备了聚苯胺/纳米二氧化钛(PANI/TiO2)复合薄膜和聚苯胺(PANI)薄膜, 并通过XPS和SEM对薄膜进行了分析表征. 采用平面叉指电极式器件制备了PANI/TiO2复合薄膜和PANI薄膜气体传感器, 研究了其在常温下对有毒气体NH3和CO 的敏感性能. 结果表明, PANI/TiO2复合薄膜较PANI薄膜具有更优的灵敏度和响应恢复特性.     

超临界反应条件下Y型分子筛催化剂失活的研究

对苯烷基化过程中Ｙ型分子筛催化剂的失活进行了多方面的实验研究。结果表明，超临界条件下该催化剂的活性寿命比液相条件下长达四倍以上，借助色－质谱联用机分析两种操作的反应产物，发现含有多环物质，并且它们的种类和数量随条件而不同。根据热力学原理，建立了多环物在超蚧流体中的溶解模型，并以并四苯，并五苯和并六苯作为焦前物模拟物进行了计算。     

南瓜籽烘烤前后化学成分的分析

对烘烤前后南瓜籽中的化学成分进行分析并对比。采用同时蒸馏萃取装置萃取南瓜籽中的挥发性成分,采取超临界CO2萃取技术萃取南瓜籽油脂,并将其分为酸、碱、中性三个部分,用气相色谱-质谱联用方法分析其中化学成分并进行对比。结果表明,南瓜籽挥发性成分中含有多种醛类和酯类化合物,烘烤后产生了大量的烷基吡嗪,其在碱性部分中的相对含量比烘烤前提高14倍多,不饱和醛类化合物含量也有明显提高。南瓜籽油脂中的主要化学成分是油酸、亚油酸及其酯类。还含有生物活性功能成分如植物甾醇、角鲨烯和维生素E等。烘烤后除角鲨烯含量有所降低,维生素E、植物甾醇、亚麻酸等均有提高。