Pressure and temperature dependence of the gas‐transport properties of dense poly[2,6‐toluene‐2,2‐bis(3,4‐dicarboxylphenyl)hexafluoropropane diimide] membranes

The gas‐transport properties of poly[2,6‐toluene‐2,2‐bis(3,4‐dicarboxylphenyl)hexafluoropropane diimide] (6FDA‐2,6‐DAT) have been investigated. The sorption behavior of dense 6FDA‐2,6‐DAT membranes is well described by the dual‐mode sorption model and has certain relationships with the critical temperatures of the penetrants. The solubility coefficient decreases with an increase in either the pressure or temperature. The temperature dependence of the diffusivity coefficient increases with an increase in the penetrant size, as the order of the activation energy for the diffusion jump is CH₄ > N₂ > O₂ > CO₂. Also, the average diffusion coefficient increases with increasing pressure for all the gases tested. As a combined contribution from sorption and diffusion, permeability decreases with increases in the pressure and the kinetic diameter of the penetrant molecules. Even up to 32.7 atm, no plasticization phenomenon can be observed on flat dense 6FDA‐2,6‐DAT membranes from their permeability–pressure curves. However, just as for other gases, the absolute value of the heat of sorption of CO₂ decreases with increasing pressure at a low‐pressure range, but the trend changes when the feed pressure is greater than 10 atm. This implies that CO₂‐induced plasticization may occur and reduce the positive enthalpy required to create a site into which a penetrant can be sorbed. Therefore, a better diagnosis of the inherent threshold pressure for the plasticization of a glassy polymer membrane may involve examining the absolute value of the heat of sorption as a function of pressure and identifying the turning point at which the gradient of the absolute value of the heat of sorption against pressure turns from a negative value to a positive one. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 354–364, 2004     

Microcalorimetric Adsorption of Alumina Oxide Catalysts for Combination of Ethylbenzene dehydrogenation and carbon Dioxide Shift-reaction

Styrene (STY) is now produced industrially in fairly large quantities by the dehydrogenation of ethylbenzene (EB) using promoted iron oxide catalyst with superheated steam.In this case, small amount of carbon dioxide formed as a by-product was known to inhibit the catalytic activity of commercial catalyst. Recently, there have been some reports which carbon dioxide showed positive effects to promote catalytic activities on the reaction over several catalysts.In this study, we attempted to combine the dehydrogenation of EB to STY with the carbon dioxide shift-reaction. The combine reaction (EB + CO2 → STY + H2O + CO) can be considered as one of the ways of using CO2 resources and can yield simultaneously STY and Carbon oxide.Alumina oxide catalysts such as Al2O3, Na2O/Al2O3 and K2O/Al2O3 were prepared by the usual impregnation method with an aqueous solution of NaNO3 and KNO3, and then calcined at 650℃ for 5 h in a stream of air. The reaction condition is 600℃, flow of CO2 38ml/mon and space velocity (EB) 1.28h-1.     

Improved convergence of a non-perturbative semi-classical pressure broadening model

It is shown that by including the second term of Magnus expansion, improved convergence can be achieved for the non-perturbative pressure broadening formalism proposed by Neilson and Gordon (J. Chem. Phys. 58 (1973) 4131). The present method was applied to the line broadening calculations of CO in a bath of Ar.     

中空光纤技术与应用特性

介绍一种采用环烯烃聚合物镀膜的中空光纤结构，阐述其传输特性，说明其使用特点，指出它在工业和医疗等领域中的应用前景。     

Design of high-capacity,reversible polymeric adsorbents for acidic gases

Polyethyleneimine (PEIM) samples crosslinked by a commercial epoxy resin (Epon 828) were prepared, and their adsorption capacity for acidic gases was studied. The swelling and deswelling characteristics of the crosslinked samples were also examined as part of this program. Reactivation of these adsorbents could be carried out by heat, or by a combination of heat and treatment in dilute alkalies.     

He-N2 radiofrequency discharge: Influence of N2 on discharge and afterglow

A diagnostic study q (energy transfer processes in a He-N₂ flowing discharge and afterglow has been performed in a radiofrequency-produced plasma cooled in a liquid nitrogen hath. Optical emission spectroscopy in the visible and infrared spectral range as well as Langrnuir probe diagnostics were used. The vibrational kinetics of CO injected in such an afterglow has been examined. It shows a slow cooling of the electrons in the afterglow regime. The electron kinetics responsible joy CO vibrahonal excitation is turned off when N₂ is added to the He discharge, while that for vibrationally excited N₂ molecules is turned on. The results are discussed on the basis of previous theorerical calculations and experiments on the He-N₂ system.     

H原子与CO2分子碰撞的化学反应与能量转移

用时间分辨傅立叶红外发射光谱的方法对H原子与CO2分子的碰撞动力学进行了实验研究．用紫外激光光解的方法分别制备出三个不同平动能为174．7、241．0和306．2 kJ／mol的氢原子,并引发H CO2→OH CO反应．观察到了反应的产物,即振动激发的CO (v≤2)．同时也看到了在H原子与CO2分子的碰撞中发生高效的T- V能量转移．CO2的反对称伸缩模的最高振动能级为v=4．化学反应与能量转移的速率之比大约为10．     

低温太阳热能与化学链燃烧相结合控制CO2分离动力系统

本文探索并提出控制CO2分离的低温太阳热能与清洁合成燃料甲醇-三氧化二铁化学链燃烧相结合的新颖能源动力系统。基于图象(?)分析方法,明确地指出甲醇化学链燃烧能量释放过程燃烧堋损失减小和低温太阳热能品位提升的机理。从能源有效利用和环境相容出发,研究和揭示化学链燃烧与太阳能有机整合共同减小CO2分离能耗的特性规律。相比不分离常规联合循环,新系统(?)效率提高约6．2个百分点;与分离CO2的联合循环相比,新系统媚效率提高约14．2个百分点。同时,低温太阳热能热转功效率可达到22．5％。     

不同方法制备的CO2-3替换磷灰石固溶体晶体化学的FTIR研究

采用不同方法制备了CO2-3替换的磷灰石固溶体,利用FTIR结合XRD对其进行了晶体化学研究,结果表明均相沉淀法制备的碳羟磷灰石(CHAP)属B型替换且替换方式是[CO3·OH]四面体替换[PO4]四面体;固相离子交换法制备的CHAP属A型替换且替换方式是[CO3]三角形配位体替换通道位置的OH-;固相反应法制备的碳氟磷灰石(CFAP)属B型替换,其替换方式是[CO3·F]四面体替换[PO4]四面体;sol-gel法制备的CHAP属AB混合型替换,其Ψ3分裂为Ψ3-1,Ψ3F,Ψ3-4.高斯函数法拟合表明Ψ3F峰是A型替换的Ψ3-2与B型替换的Ψ3-3的叠合.当WCO2-3＜3.34%时,随CO2-3含量增加,A型替换量增大,且当WCO2-3=3.34%时达最大值,当3.34%＜WCO2-3＜7.52%时,随CO2-3含量增加,B型替换量增大,且当WCO2-3= 7.52%时亦到饱和.