高效液相色谱-质谱/质谱法测定食品中的酸性橙Ⅱ与酸性金黄

建立了高效液相色谱-质谱/质谱法测定豆制品、蔬菜制品、辣椒制品、熟肉制品、水产品、火锅底料等食品中酸性橙Ⅱ和酸性金黄的分析方法。样品经均质后,采用70%乙腈水溶液超声提取,WAX固相萃取小柱净化后,过0.22μm聚四氟乙烯有机滤膜,在Thermo Hypersil Gold a Q柱(100 mm×2.1 mm,1.9μm)色谱柱上分离,乙腈-水为流动相梯度洗脱,采用电喷雾离子化(ESI-),多反应监测模式进行检测,基质加标标准曲线外标法定量。结果表明:酸性橙Ⅱ和酸性金黄在6类食品样品中均显示较好峰形,线性范围为1.0~20μg·L-1,相关系数均大于0.995,对于豆制品、蔬菜制品、辣椒制品等含油脂较少的食品,酸性橙Ⅱ和酸性金黄的定量下限(LOQ,S/N=10)分别为1.4,1.0μg·kg-1;对于熟肉制品、水产品、火锅底料等含油脂较多的食品,酸性橙Ⅱ和酸性金黄的定量下限(LOQ,S/N=10)分别为2.0,1.4μg·kg-1。在6类食品样品中分别添加酸性橙Ⅱ和酸性金黄进行加标回收实验,测得回收率为65.8%~99.0%,相对标准偏差(RSD)为2.4%~6.0%。该方法具有基质干扰小、灵敏度高、适用性强、准确可靠等特点,适用于食品中酸性橙Ⅱ和酸性金黄的定量检测及确证分析。     

Synthesis and characterization of hexagonal boron nitride used for comparison of removal of anionic and cationic hazardous azo-dye: kinetics and equilibrium studies

The purpose of this study was to compare the adsorption behavior of cationic and anionic dyes onto a hexagonal boron nitride (hBN) nanostructure that was rich in a negative charge. Herein, the hBN nanostructure was synthesized using boric acid as a precursor material. The characteristic peaks of the hBN nanostructure were performed using Fourier transform infrared (FT-IR) and Raman spectroscopies. The morphology and the particle size of hBN nanostructure were determined by transmission electron microscopy (TEM) and scanning electron microscopy (SEM). During the studies, various essential adsorption parameters were investigated, such as the initial dye concentration, pH of the dye solution, adsorbent dose, and contact time. Under optimal conditions, the removal of 42.6% Metanil yellow (MY) and 90% Victoria blue B (VBB) from aqueous solution was performed using a 10-mg hBN nanostructure. Furthermore, the equilibrium studies showed that the Freundlich isotherm model fitted well for the removal of MY. However, the Langmuir isotherm model fitted well for the removal of VBB. Moreover, according to the results obtained from the kinetic studies, while the first-order kinetic model was suited for the adsorption of the MY, the second-order kinetic model was found to well fit for the adsorption of VBB.     

Fabrication of β-cyclodextrin-coated poly (diallyldimethylammonium chloride)-functionalized graphene composite film modified glassy carbon-rotating disk electrode and its application for simultaneous electrochemical determination colorants of sunset yellow and tartrazine

We proposed a green and facile approach for the synthesis of β-cyclodextrin-coated poly(diallyldimethylammonium chloride)-functionalized graphene composite film (β-CD-PDDA-Gr) by using l-ascorbic acid (l-AA) as the reducing agent at room temperature. The β-CD-PDDA-Gr composite film modified glassy carbon-rotating disk electrode (GC-RDE) was then developed for the sensitive simultaneous determination of two synthetic food colorants: sunset yellow (SY) and tartrazine (TT). By cyclic voltammetry (CV), the peak currents of SY and TT increased obviously on the developed electrochemical sensor. The kinetic parameters, such as diffusion coefficient D and standard heterogeneous rate constant k_b, were estimated by linear sweep voltammetry (LSV). Under the optimal conditions, the differential pulse voltammetry (DPV) signals of SY and TT on the β-CD-PDDA-Gr modified GC-RDE were significantly enhanced. The enhanced anodic peak currents represented the excellent analytical performance of simultaneous detection of SY and TT in the range of 5.0 × 10⁻⁸ to 2.0 × 10⁻⁵ mol L⁻¹, with a low limit of detection (LOD) of 1.25 × 10⁻⁸ mol L⁻¹ for SY and 1.43 × 10⁻⁸ mol L⁻¹ for TT (S N⁻¹ = 3). This proposed method displayed outstanding selectivity, good stability and acceptable repeatability and reproducibility, and also has been used to simultaneously determine SY and TT in some commercial soft drinks with satisfactory results. The obtained results were compared to HPLC of analysis for those two colorants and no significant differences were found. By the treatment of the experimental data, the electrochemical reaction mechanisms of SY and TT both involved a one-electron-one-proton-transfer process.     

Gold Nanoparticles Loaded on Activated Carbon as Novel Adsorbent for Kinetic and Isotherm Studies of Methyl Orange and Sunset Yellow Adsorption

In this research, a novel adsorbent gold nanoparticle loaded on activated carbon (Au-NP-AC) was synthesized by a low cost in a routine protocol. Subsequently, this novel material characterization and identification are followed by different techniques such as th eBruner–Emmet–Teller (BET) theory, scanning electron microcopy, and transmission electron microscopy analysis. Unique properties such as high BET surface area (>1229.55 m²/g) and low pore size (<22.46 Å) and average particle size lower than 48.798 Å in addition to high reactive atom and presence of various functional groups make it possible for efficient removal of sunset yellow (SY) and methyl orange (MO). Generally, the influence of variables including amount of adsorbent, initial dyes concentration, contact time, temperature on dyes removal percentage has great effect on removal percentage that their influence was optimized. The kinetic of proposed adsorption processes efficiently followed, pseudo-second-order and intra-particle diffusion approach. The equilibrium data of the removal strongly follow the Langmuir monolayer adsorption with high adsorption capacity in a short amount of time. This novel adsorbent by small amount (0.01 g) really is applicable for removal of high amount of both dyes (MO and SY) in short time (<18 minutes). Equilibrium data fitted well with the Langmuir model at all amount of adsorbent, while maximum adsorption capacity for MO 161.29 mg g^?1 and for SY 227.27 for 0.005 g of Au-NP-AC.     

4-溴-2-环戊烯砜酯化衍生物的合成

以3,4-二溴环戊砜(1)为原料, 在无水吡啶作用下发生消除反应, 得到反应中间体4-溴-2-环戊烯砜(2), 再分别与一系列取代苯甲酸盐3a～3c以及茜素黄GG (3d)发生酯化反应, 合成出4种新环戊烯砜衍生物4a～4d, 并用IR, ¹H NMR, MS, 元素分析等表征了它们的结构.     

A comprehensive in vitro and in vivo metabolism study of hydroxysafflor yellow A

As the most important marker component in Carthamus tinctorius L., hydroxysafflor yellow A (HSYA) was widely used in the prevention and treatment of cardiovascular diseases, due to its effect of improving blood supply, suppressing oxidative stress, and protecting against ischemia/reperfusion. In this paper, both an in vitro microsomal incubation and an in vivo animal experiment were conducted, along with an LC‐Q‐TOF/MS instrument and a 3‐step protocol, to further explore the metabolism of HSYA. As a result, a total of 10 metabolites were searched and tentatively identified in plasma, urine, and feces after intravenous administration of HSYA to male rats, although no obvious biotransformation was found in the simulated rat liver microsomal system. The metabolites detected involving both phase I and phase II metabolism including dehydration, deglycosylation, methylation, and glucuronic acid conjugation. A few of the metabolites underwent more than one‐step metabolic reactions, and some have not been reported before. The study would contribute to a further understanding of the metabolism of HSYA and provide scientific evidence for its pharmacodynamic mechanism research and clinical use.     

Spectroscopic properties of Sm-doped oxide and fluoride glasses for efficient visible lasers (560-660 nm)

The spectroscopic properties of Sm³⁺-ions in tellurite, fluorophosphate, and fluorine-modified silicate glasses are examined under the excitations at 488 nm (Ar⁺ ion laser) and 1060 nm laser. The effect of dopant ion and glass-host interaction, branching ratio of transitions and line shapes of emission lines in the visible region are discussed in view of the ionicity and covalency of hosts. The lifetimes of metastable levels are also reported and the results are explained for designing the visible and UV laser hosts.     

Fabrication of diarylide yellow pigments/modified SiO2 core-shell hybrid composite particles for electrophoretic displays

Diarylide yellow pigments/modified SiO₂ core-shell hybrid composite particles were fabricated via a newly developed two-step procedure. The surface of diarylide yellow pigments was coated with SiO₂ by the hydrolysis of Na₂SiO₃. The obtained particles were then modified with in situ generated 3-aminopropylsilanetriol or succinic acid to form composite particles containing amino or carboxyl groups. The FT-IR spectra, TGA and TEM showed that the particles had a core-shell structure, the SEM suggested that the surface morphology of the composite particles was smooth, and the XPS and zeta potential measurement indicated that the composite particles had a high charge load. The obtained composite particles have been applied as electrophoretic particles in the electronic paper, which demonstrated that the newly developed procedure is an effective way to produce various organic/inorganic composite particles used for electrophoretic displays.     

6.2 W外腔和频589 nm黄光激光器

 报道了一台800 Hz,6.2 W外腔和频的589 nm黄光激光器。基频激光器均采用双棒串接平平对称腔,增益介质为Nd：YAG晶体,采用声光调Q方式分别获得11.1 W的1 064 nm激光和12.6 W的1 319 nm激光。和频晶体采用三硼酸锂（LBO）,尺寸为4 mm×4 mm×30 mm,采用Ⅰ类非临界相位匹配。将两束激光通过分光镜合束,聚集后注入LBO晶体,获得589 nm黄光最大输出功率为6.2 W,脉宽为50 ns,和频效率26.2%。x方向和y方向的光束质量平方因子分别为3.20和3.61。     

LPE生长GaN的不同极性面的光学性质

极化效应会导致GaN基发光器件的效率降低,因此关于非极性和半极性GaN单晶的研究受到了广泛关注.为了进一步探究不同极性GaN的发光特性和杂质掺入的内在机理,本文利用钠助熔剂法侧向生长出的不同极性面的GaN单晶作为研究对象,对比了不同极性面的光学性质及杂质掺入特点,讨论了黄光带(YL)峰的起源及其影响因素.首先利用阴极荧...