Remarkable reactivity enhancement with Sb?N inter-coordination of ethynyl-1,5-azastibocines in Pd-catalyzed cross-coupling reactions with organic halides

The reaction of 12-arylethynyl-6-methyl-5,6,7,12-tetrahydrodibenzo[c,f][1,5]-azastibocines with organic halides such as acyl halides and aryl halides in the presence of PdCl₂(PPh₃)₂ as a catalyst led to the formation of cross-coupling products, alkynyl ketones and diaryl acetylenes, in good yields. The reactivity of the ethynyl group on the 1,5-azastibocines was far superior to that on diphenyl(phenylethynyl)stibane, which brought about marked improvement in the reaction conditions (lower temperature and shorter reaction time) and in the yields of the cross-coupling products. Single-crystal X-ray analysis of the ethynyl-1,5-azastibocine showed the presence of intramolecular Sb?N interaction which should be responsible for the remarkable reactivity enhancement of the 1,5-azastibocines for this type of reaction.     

Dawson结构钼钒磷杂多化合物对苯酚过氧化氢羟化作用的研究

Ｄａｗｓｏｎ结构钼钒磷杂多化合物对苯酚过氧化氢羟化作用的研究于剑锋，杨宇，吴通好，孙家锺（吉林大学化学系理论化学研究所，长春，１３００２３）关键词Ｄａｗｓｏｎ结构钼钒磷杂多化合物，苯酚羟化，过氧化氢苯二酚（ＤＢＨ）是重要的化工原料．由芳香化合物羟化制...     

Base induced cyclization of some quinolines. Formation of fused nitrogen heterocyclic ring system

Condensation of 3,5-dinitro-4-chloro-6-methoxy-2-methylquinoline (1) with benzylamine, ethanolamine and/or thioglycolic acid afforded the quinoline derivatives4 a-c. Cyclization of4 a and4 b with alkali and condensation of1 with glycine in sodium carbonate solution furnish 2H-imidazo[4,5-c]quinoline derivatives5 a-c, respectively. Treatment of5 b with benzaldehyde in presence of zinc chloride gave the styryl derivative6. 1 reacted with sodium azide to give the azido derivative4 d, which upon treatment with phenylhydrazine or sodium borohydride yielded the 4-amino derivative4 3. Moreover,1 was treated with phenylhydrazine to give4 f, which cyclized in 10% sodium hydroxide solution to the corresponding v-triazolo[4,5-c]quinoline 3-oxide derivative7. When however4 f was treated with dilute hydrochloric acid, the corresponding phenylpyrazolo[3,4,5-de]quinoline derivative8 was obtained.

---

Baseninduzierte Cyclisierung einiger Chinoline. Darstellung höherer Stickstoff-Heterocyclen

Zusammenfassung Kondensation von 3,5-Dinitro-4-chlor-6-methoxy-2-methylchinolin (1) mit Benzylamin, Ethanolamin und/oder Thioglycolsäure ergab die Chinolinderivate4 a-c. Cyclisierung von4 a und4 b mit Alkali und Kondensation von1 mit Glycin in Natriumcarbonatlösung lieferte 2H-imidazo[4,5-c]chinolin-Derivate5 a-c. Behandlung von5 b mit Benzaldehyd in Gegenwart von Zinkchlorid ergab das Styrylderivat6. 1 wurde mit Natriumazid zum Azidoderivat4 d umgesetzt, das mit Phenylhydrazin oder Natriumborhydrid zum 4-Aminoderivat4 e weiterreagierte.1 ergab mit Phenylhydrazin4 f, das in 10% NaOH-Lösung zum entsprechenden Triazolo[4,5-c]chinolin-Derivat7 cyclisierte. Aus4 f wurde mit verdünnter Salzsäure das Phenylpyrazolo[3,4,5-de]chinolin8 erhalten.

     

Synthesis of 4-arylcarbamoyl-5-(2-hydroxynaphthylazo)imidazoles and 1-substituted naphtho[2,1-e]imidazo[5,1-c][1,2,4]triazines

The reactions of β-naphthol with 5-diazoimidazoles and imidazolyl-5-diazonium salts containing chemically different carboxamide groups in position 4 were studied. Heterocyclization of 4-arylcarbamoyl-5-(2-hydroxynaphthylazo)imidazoles formed in these reactions was investigated. The presence of the NH fragment in the amide group prevents this process, the reaction giving instead 3-substituted 3,7-dihydroimidazo[4,5-d][1,2,3]triazin-4-ones, which is due to reversibility of C-azo coupling. Methods for modification of 1-ethoxycarbonyl group in the naphtho[2,1-e]imidazo[5,1-c][1,2,4]triazine system were developed and used to prepare substituted carboxamides inaccessible by other routes. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1208–1213, July, 2006.     

4,6—二取代—3—酮—5硫酮—1,2,4—三嗪类化合物的质谱研究

1,2,4-三嗪类化合物具有抗癌、抗病毒、杀虫、抑制中枢神经系统等多种作用。前文用苯甲酰基硫代甲酰胺直接与氨基脲反应,制备了8种新的4,6-二取代-3-酮-5-硫酮-1,2,4-三嗪类化合物(a—h),本文测定了其电子轰击质谱、高分辨质谱及联动扫描质谱,以了解其质谱裂解途径。     

Determination of lead in vinegar by ICP-MS and GFAAS: evaluation of different sample preparation procedures

Lead concentrations of 59 different types of vinegars (15-307 μg l⁻¹ in balsamic vinegars and 36-50 μg l⁻¹ in wine vinegars) were determined using both inductively coupled plasma mass spectrometry (ICP-MS) and graphite furnace atomic absorption spectrometry (GFAAS). Although the precision of direct analyses, following simple aqueous dilutions, with either instrumental method was poor; that precision, following nitric acid and/or hydrogen peroxide digestions, markedly improved with either instrument and the values obtained with the two instruments were in good agreement. The efficacy of different digestions, including (1) nitric acid using a heating block, with or without addition of hydrogen peroxide and (2) mixtures of nitric acid and hydrogen peroxide using ultraviolet (UV) photolysis, were then assessed. The latter procedure was found to be much faster and more efficient, but it was limited by the relatively high levels of contaminant lead in hydrogen peroxide. Consequently, it is recommended that lead concentrations in vinegar be measured following a nitric acid digestion and UV photolysis to oxidize all organic matter before ICP-MS or GFAAS analysis; and it is further recommend that the thermal settings for the latter analyses be adjusted to account for the apparent presence of relatively volatile organolead compounds in vinegar digests.     

Applicability of glass fiber as a support material for generation of gaseous standard mixtures using thermal decomposition of the surface compound. Calibration of analytical equipment

The use of glass fiber as a support material for a surface compound serving to generate gaseous standard mixtures of ethene is described. The technique is based on the process of thermal decomposition of the surface compound in a desorber connected on‐line via a multi‐port valve to the calibrated device. The surface compound undergoes thermal decomposition at 245°C, yielding known amounts of ethene. The method enables on‐line preparation of a standard mixture immediately before the calibration step. Consequently, it can be also applied for the generation of standard mixtures containing volatile, malodorous, unstable, and toxic compounds.     

Synthesis and Structures of Titanosiloxane Cage Compounds

Reaction of (triphenylmethyl)silanetriol (1) with cyclopentadienyltitanium trichloride (CpTiCl₃) in the presence of triethylamine as a HCl scavenger gave both compounds of a partial open-cage type {[Ph₃CSiO(OH)]₃(Ph₃CSiO_3/2)(CpTiO_3/2)₄} (2) and cube type (Ph₃CSiO_3/2CpTiO_3/2)₄ (3). The 1:1 reaction of 1 and CpTiCl₃ in toluene solvent at reflux temperature for 3 d afforded compounds 2 (22%) and 3 (36%). When 1 is reacted with a 1.5 fold excess of CpTiCl₃ under the same conditions, compound 3 was obtained in high yield (81%) along with 2 in trace quantities. Compounds 2 and 3 were fully characterized by the analyses of ¹H, ¹³C, ²⁹Si NMR, IR, and FAB MS data. The solid-state structure of 3 was determined by a single crystal X-ray diffraction study. Compound 3 had shown to have catalytic activity for the oxidation of alkenes such as 1-octene, cyclooctene, and norbornene with t-butyl hydrogen peroxide. The effect of solvent was observed in this epoxidation reaction. The order of reactivity were decreased as follows: CHCl₃ > hexane THF.