大气二氧化硫检测反应室的光学特性研究

为了适应检测大气中低浓度二氧化硫的需要,提出两个物理模型来定量分析反应室的横截面半径和内壁吸光率对反应室信噪特征的影响,计算结果表明存在一个最佳的半径,为反应室的优化设计提供理论依据。     

等离子体-吸附SO2转化机理研究

本文对SO2在等离子体和分子筛吸附联合作用下的转化现象进行了研究,开展了实验、模型建立、机理研究和理论计算等工作。研究表明,二者共同作用下可有效的将SO2转化,等离子体在转化反应中起着决定性的作用,其主要反应为OH SO2→HOSO2。理论计算和实验数据基本吻合。     

基于非参数背景抑制的弱小目标管线法检测

介绍了一种红外图像背景抑制的非参数方法(E_kernel)。提出了一种弱小目标的管线检测算法。E_kernel方法不同于传统的线性或非线性背景预测,它对背景杂波分布的统计特性不敏感,受其影响较小,具有非参数特性。管线检测算法对序列图像做若干相同的顺序处理,采用并行分布式计算,处理时间短。仿真试验表明,该算法能有效地检测出低信噪比红外序列图像中的弱小目标的运动轨迹,具有较高的实时性。     

Using low intensity ultrasound to improve the efficiency of biological phosphorus removal

Low intensity ultrasound can produce various effects on biological materials, such as stimulating enzyme activity, cell growth, biosynthesis, etc., which may improve the efficiency of enhanced biological phosphorus removal (EBPR). We adopt total phosphorus (TP) and dehydrogenase activity (DHA) as indicators to confirm the feasibility of applying low intensity ultrasound in EBPR. Single-factor experiments and orthogonal test were conducted in batch anaerobic/oxic (A/O) process simulation to study the influence of ultrasonic intensity and exposure time in the EBPR process. The results showed that the optimal ultrasonic parameters were 0.2 W/cm² and 10 min under which condition the TP concentration in the effluent was 35–50% lower than that of the control (without ultrasonic irradiation). Changes of sludge activities after ultrasonic irradiation were examined. The improvement of sludge activity by ultrasound took 4 h after irradiation to reach the peak level, when an increase above 50% of DHA has been achieved by ultrasonic irradiation, and the enhancing effects induced by ultrasound disappeared in 16 h after irradiation. A tentative mechanism of biological phosphorus removal enhancement stimulated by ultrasound was discussed based on these phenomena.     

Deodorisation effect of diamond-like carbon/titanium dioxide multilayer thin films deposited onto polypropylene

Many types of plastic containers have been used for the storage of food. In the present study, diamond-like carbon (DLC)/titanium oxide (TiO₂) multilayer thin films were deposited on polypropylene (PP) to prevent flavour retention and to remove flavour in plastic containers.For the flavour removal test, two types of multilayer films were prepared, DLC/TiO₂ films and DLC/TiO₂/DLC films. The residual gas concentration of acetaldehyde, ethylene, and turmeric compounds in bottle including the DLC/TiO₂-coated and the DLC/TiO₂/DLC-coated PP plates were measured after UV radiation, and the amount of adsorbed compounds to the plates was determined. The percentages of residual gas for acetaldehyde, ethylene, and turmeric with the DLC/TiO₂ coated plates were 0.8%, 65.2% and 75.0% after 40 h of UV radiation, respectively. For the DLC/TiO₂/DLC film, the percentages of residual gas for acetaldehyde, ethylene and turmeric decreased to 34.9%, 76.0% and 85.3% after 40 h of UV radiation, respectively. The DLC/TiO₂/DLC film had a photocatalytic effect even though the TiO₂ film was covered with the DLC film.     

基于驻留时间补偿的抛光误差控制方法

 针对计算机控制光学表面成形中光学表面存在中高频误差的问题,提出了一种基于驻留时间补偿的有效控制方法。分析了抛光误差的形成机理和影响因素,对系统的误差影响因素进行分类和定量描述,构建了抛光过程中磨损影响因子、浓度变化影响因子和系统影响因子。基于各影响因素的影响因子对抛光驻留时间的求解函数进行了修正,提出采用离散最小二乘法对修正的函数求解驻留时间。研究表明：这种补偿方法能提高计算机控制光学表面成形技术中加工模型的精度,减小光学表面的残余误差。     

Density functional theory study of neutral AlS_n(n=2-9) clusters

This paper investigates the geometrical structures and relative stabilities of neutral AlS n(n = 2-9) using the density functional theory.Structural optimisation and frequency analysis are performed at the B3LYP/6-311G(d) level.The ground state structures of the AlS n show that the sulfur atoms prefer not only to evenly distribute on both sides of the aluminum atom but also to form stable structures in AlS n clusters.The structures of pure S n are fundamentally changed due to the doping of the Al atom.The fragmentation energies and the second-order energy differences are calculated and discussed.Among neutral AlS n(n = 2-9) clusters,AlS 4 and AlS 6 are the most stable.     

傅里叶变换滤波-差分吸收光谱法在烟气SO_2在线监测中的应用研究

差分吸收光谱(DOAS)法是利用气体分子窄带吸收特征来测量气体浓度的一种新型的光谱测量技术。本文分析了紫外差分吸收光谱(DOAS)法检测SO2数值处理上的问题,提出傅里叶变换滤波分析方法。本方法可有效减少各种干扰对SO2浓度计算的影响,特别是对与SO2有重叠差分吸收光谱但有不同频谱特性且未知气体的干扰有很好的效果。     

A Semiconductor Laser of the Visible Range as an Exciting Source of Raman Scattering

A possibility of application of semiconductor lasers of the visible range as exciting sources for Raman spectroscopy is studied. An experimental set-up for measuring Raman spectra of polycrystalline dielectrics and broad-gap semiconductors excited by a semiconductor laser with a wavelength of 640 nm was created. The conditions under which the spectral width of the lasing line of a semiconductor laser was within 10^-3 cm^-1 in the continuous mode with a power of 10 mW are realized. The characteristics of various types of exciting sources used in Raman spectroscopy are compared. The results of studies of the characteristic Raman spectra excited with a semiconductor laser in polycrystalline sulfur are presented.     

微生物量对印染废水中的基质去除速率的影响

基于Monod方程,引入微生物量函数,建立了考虑微生物量作用的基质去除速率方程,并利用基质去除的零级反应速率求解有关参数.活性污泥好氧处理印染废水时,所需要的微生物量与反应时间密切相关,当HRT为24h,MLSS为2.2g·L-1,基质去除率为83%;而当HRT为12h,要达到相同的基质去除率,MLSS须维持在4.0g·L-1.当MLSS≤2.5g·L-1,基质去除速率与微生物量成正比;当MLSS为4.0g·L-1,基质去除速率约为最大值的86.2%,而且MLSS≥4.0g·L-1,基质去除速率随MLSS的变化不明显.所建立的基质去除速率方程能够较好地反映微生物量对基质去除速率的影响.