Effect of manganese addition on physical properties of Co0.6Zn0.4MnxFe2-xO4 system

X-ray analysis and magnetic properties have been studied for the system Co_0.6Zn_0.4Mn_xFe_2-xO₄. The bulk density, X-ray density and porosity were also studied. It was found that the lattice constant decreased with increasing manganese concentration x. The X-ray density, the bulk density and porosity do depend on the manganese content. The magnetic susceptibility and the activation energies were found to be increased with increasing percentage of the manganese ions while the dc conductivity decreased.     

Synthesis of Novel Unsymmetrical and Symmetrical Diacetylenic Ketones

A convenient and efficient method for the preparation of unsymmetrical and symmetrical diacetylenic ketones bearing a carboxylate group.     

Novel Azobenzene-Functionalized Polyelectrolytes of Different Substituted Head Groups 2: Control of Surface Wetting in Self-Assembled Multilayer Films

A novel set of light-responsive polyelectrolytes has been developed and studied, to control and tune surface wettability by introducing various types of substituted R head-groups of azo polyelectrolytes in self-assembled multilayer (SAMU) films. As part of a larger project to develop polymer surfaces where one can exert precise control over properties important to proteins and cells in contact, photo-reversibly, we describe here how one can tune quite reliably the contact angle of a biocompatible SAMU, containing a photo-reversible azo chromophore for eventual directed cell growth. The azo polyelectrolytes described here have different substituted R head-group pairs of shorter-ionized hydrophilic COOH and SO₃H, shorter non-ionized hydrophobic H and OC₂H₅, and larger non-ionized hydrophobic octyl C₈H₁₇ and C₈F₁₇, and were employed as polyanions to fabricate the SAMU onto silicon substrates by using the counter-charge polycation PDAC. The prepared SAMU films were primarily characterized by measurement of their contact angles with water. The surface wetting properties of the thin films were found to be dependent on the type of substituted R-groups of the azo polyelectrolytes through their degree of ionization, size, hydrophobicity/hydrophilicity, solubility, conformation, and inter-polymeric association and intra-polymeric aggregation. All these factors appeared to be inter-related, and influenced variations in hydrophobic/hydrophilic character to different extents of aggregates/non-aggregates in solution because of solvation effects of the azo polyanions, and were thus manifested when adsorbed as thin films via the SAMU deposition process. For example, one interesting observation is significantly higher contact angles of 79° for SAMU films of larger octyl R groups of PAPEA-C₈F₁₇ and PAPEA-C₈H₁₇ than for others with contact angles of 64° observed for non-polar R-groups of OC₂H₅ and H. Furthermore, lower contact angle values of 59° for SAMU films with polar R-groups of COOH and SO₃H relative to that of non-polar R-groups are in accordance with their expected order of the hydrophilicity or hydrophobicity. It is possible that the large octyl groups are more effective in shielding the ionic functional groups on the substrate surface, and contributed less to the water drop-molecule interactions with ionic groups of the PDAC and/or AA groups. In addition, higher hydrophobicity of the SAMU films may be due to the incorporation of bulky and hydrophobic groups in these polyelectrolytes, which can produce aggregates on the surfaces of the SAMU films. Through understanding and controlling the complex aggregation behavior of the different substituted R-groups of these azo polyelectrolytes, and hence their adsorption on substrates, it appears possible to finely tune the surface energy of these biocompatible films over a wide range, enhance the photo-switching capabilities of the SAMU films, and tailor other surface properties for the development and application of new devices in diverse areas of microfluidics, specialty coatings, sensors, and biomedical sciences.     

Asymmetric Cyclic Phosphorothonamides Containing Substituted Pyridine

In order to find high-acitivity and low-toxicity pesticidal lead compounds, a type of novel, asymmetric cyclic phosphorothonamides containing substituted pyridine were synthesized via the condensation reactions of 2-chloro-4-substitutedphenyl-5,5-dimethyl-1,3,2-dioxaphosphinane 2-sulfide with 3-aminomethylpyridine. The cis and trans isomers of the products were isolated by column chromatography on silica gel. The structures of the products were characterized by ¹ H NMR, ³¹ P NMR, MS, and elemental analyses. The configuration of 3a was determined by X-ray diffraction analysis. The results of the preliminary bioassay showed that the new compounds possess potential fungicidal activities.     

An Efficient,Basic Resin-Mediated,One-Pot Synthesis of Dithiocarbazates Through Alcoholic Tosylates

A quick and efficient, one-pot synthesis of dithiocarbazates was accomplished in high yields by the reaction of various alcoholic tosylates of primary, secondary, and tertiary alcohols, with substituted hydrazines using an Amberlite IRA 400 (basic resin)/CS ₂ system. The reaction conditions are mild with simpler work-up procedures than previously reported methods.     

Synthesis and Characterization of Benzonitrile-Substituted Silyl Ethers

The silyl ethers (siloxanes) Me_{4? x}Si(OC₆H₅CN)_x (x = 1–4) (1–4), O(Si(OC₆H₄CN) (Me)₂)₂ (5), and Me₃Si–O–C₆F₄CN (6) have been synthesized by the reaction of the respective p-hydroxybenzonitriles and chlorosilanes in the presence of N,N,N′,N′-tetramethylethylenediamine (TMEDA) as hydrogen chloride acceptor. All compounds have been fully characterized by CHN-analysis, melting point, IR, Raman, mass spectroscopy, and ¹H, ¹³C, ²⁹Si NMR spectroscopy. Furthermore, the crystal structures of these compounds—with the exception of Me₂Si(OC₆H₅CN)₂, which is a liquid—were determined by X-ray diffractometry.     

Trityl Salt-Initiated Cationic Polymerization of 1,2-Cyclohexene Oxide: Structural Analyses of the Products

The polymerization of 1,2-cyclohexene oxide was carried out at 0°C in dichloroethane with triphenylmethyl hexafluoroarsenate as the initiator. A typical reaction product (PCHO-1) was analyzed by infrared and nuclear magnetic resonance spectroscopy as well as by gel-permeation chromatography, x-ray diffraction, and differential scanning calorimetry (DSC). The x-ray and DSC data show that PCHO-1 is an amorphous substance. The results of the NMR analyses show that the propagation step in the trityl salt-initiated polymerization obeys Bernoullian statistics with a P_m value of 0.38.     

单元和多元取代纳米氢氧化镍晶相及其结构稳定性研究

以硝酸镍为镍源,硫酸钴、硫酸铜、硫酸铝为掺杂原料,采用超声波辅助沉淀法分别制备了单元和多元取代纳米氢氧化镍。用X射线衍射（XRD）、傅里叶变换红外光谱（FTIR）、激光粒度仪（PSD）及电子显微镜（TEM、SEM）对样品晶相结构、形貌、粒度分布等进行了表征,研究了单元或多元取代对产物晶相及其结构稳定性的影响。结果表明,样品均为纳米级Ni（OH）₂,随着掺杂元素种类的增多,其一次粒子变得细小,团聚加重,二次粒子粒径增大。样品中α-Ni（OH）₂比例随取代元素增多而增大。相对于Co单元和Co/Cu双元取代,Co/Cu/Al三元取代的样品其晶相结构更稳定,在碱液中浸泡3周后仍为纯α-Ni（OH）₂。在相同掺杂比例下,Cu取代比Co取代更有利于α-Ni（OH）₂的生成,但Co取代的样品结构稳定性优于Cu取代的样品。     

Triton-B-Catalyzed,Efficient, One-Pot Synthesis of Dithiocarbazates Through Alcoholic Tosylates

A quick, efficient, one-pot synthesis of dithiocarbazates was accomplished in high yields by the reaction of various tosylates of primary, secondary, and tertiary alcohols with a variety of substituted hydrazines using the benzyl–trimethylammonium hydroxide (Triton-B)/CS₂ system. The reaction conditions are mild with simpler workup procedures than the reported methods.