Recyclable Siloxy Serine Organocatalyst for the Direct Asymmetric Mannich Reactions in Ionic Liquids

A recyclable siloxy-L-serine organocatalyst has been developed to catalyze the asymmetric direct three-component Mannich reactions in ionic liquid hmim[PF₆], furnishing the β-amino carbonyl scaffold in high enantio- and diastereoselectivities. The direct Mannich reaction between a selection of aromatic aldehydes and ketones resulted in good yields and high enantioselectivities.

Synthesis of fluorinated malonamides and use in L/L extraction of f-elements

Synthesis of new fluorinated tertiary malonamides (F-malonamides) was accomplished, and their liquid/liquid (L/L) extraction properties with f-elements were investigated. These molecules are fluorinated analogues of well known extractants used in several processes designed towards the treatment of nuclear wastes, and the efficient separation of lanthanides from minor actinides; however, the synthesis of F-malonamides deserved a modification of the general synthetic route commonly employed to prepare H-malonamides. Extraction of neodymium from various aqueous media into both fluorous and classical solvents was studied, which revealed an opposite trend between F-malonamides and H-malonamides: L/L extraction ability is very sensitive to the nitrogen atoms substitution pattern, and the most efficient F-malonamide is compound 3 (R₁ = Me), whereas the best H-malonamide is compound 5 (R₁ = Bu, DMDBTDMA).     

Synthesis,Structures, Luminescent and Magnetic Properties of Heterometallic 5p‐4f Compounds with Ethylenediaminetetra­acetate

A series of heterometallic Ln^III–Sb^III edta‐containing compounds with the formulas [Sb₂(edta)₂Ln]NO₃ · nH₂O [edta = ethylenediaminetetraacetate; Ln = Eu, n = 7 ( 1 ); Gd, n = 7.5 ( 2 ) and Tb, n = 8 ( 3 )] were synthesized and characterized by elemental analyses (EA), powder X‐ray diffraction (PXDP), Fourier transform infrared spectroscopy (FT‐IR), and thermogravimetric analyses (TGA). Their fluorescence and magnetic properties were also studied. The thermal analysis demonstrates the compounds formation of the antimony, lanthanide ions, and edta^4– ligands. FT‐IR spectra reveal that the antimony and lanthanide ions are connected through the carboxylate bridges. The studies of luminescence properties show that compounds 1 and 3 exhibit typical luminescence in the visible region. Furthermore, magnetic properties reveal compounds 2 and 3 have weak ferromagnetic behavior.     

pH-Sensitive Dye-Polyether Derivatives as Dispersants for Its Parent Dye. Part 1: Synthesis and Hydrolysis Behavior

A series of dye-polyether derivatives, supposedly to be used as dispersants for parent dye, were synthesized by grafting poly(oxyalkylene)-amines based on differing both molecular weights and degrees of hydrophilicity/hydrophobicity, onto C.I. disperse red 60 via a stable urea linkage. The structures of the dye-polyether derivatives were characterized by FTIR, ¹H NMR, and SEC. The influence of pH on the hydrolysis behaviors of the dye-polyether derivatives were studied in buffered aqueous solutions within the pH range of 4 to 10. The hydrolysis of dye-polyether derivatives was pH dependent and relatively faster in mild alkaline buffer solution than in acidic one. The influence of poly(oxyalkylene)-amine structure on the hydrolysis behavior was also investigated; it was found that the hydrolysis rate is affected little by the molecular weight and increases with the increasing hydrophilicity of the poly(oxyalkylene)-amine.     

Syntheses and Crystal Structures of Two New Macrocyclic Compounds

Two new macrocyclic compounds, [Cu2(L)2](ClO4)4·2CH3OH (1) and [Cu(L)](ClO4)2·2H2O (2) (L = 1,3,10,12,15,18-hexaazatetracyclodocosane) were synthesized by condensation reactions involving amines and formaldehyde in the presence of copper anion. Compound 1 crystallizes in triclinic, space group Pí with a = 10.442(2), b = 14.197(3), c = 17.388(4), α = 91.218(4), β = 90.69(3), γ = 93.756(4)o, V = 2520.4(9)3, Z = 2, F(000) = 1260, Dc = 1.589 Mg/m3, Mr = 1205.92, μ = 1.137 mm-1, λ = 0.71073, the final R = 0.0668 and wR = 0.1573 for 9703 observed reflections with I > 2σ(I). Compound 2 crystallizes in monoclinic, space group C2/c with a = 16.911(2), b = 11.4172(15), c = 27.059(4), β = 107.787(2)o, V = 4974.7(12)3, Z = 8, F(000) = 2504, Dc = 1.610 Mg/m3, Mr = 602.92, μ = 1.155 mm-1, λ = 0.71073 , the final R = 0.0419 and wR = 0.1131 for 4374 observed reflections with I > 2σ(I).     

Synthesis and thermotropic studies of a novel series of nematogenic liquid crystals 2-(6-alkoxynaphthalen-2-yl)-5-cyanopyridines

A novel series of highly birefringent liquid crystalline compounds, 2-(6-alkoxynaphthalen-2-yl)-5-cyanopyridines (nO-NpPyCN, n?=?2–8) that have potential as commercially useful, were synthesised using a short two-step reaction with overall yields between 55% and 85%. Spectral analyses were in accordance with the expected structures. Their thermotropic behaviours were investigated by polarising optical microscopy and differential scanning calorimetry. It was found that the desymmetrised core results in a nematic phase with a broad mesophase range.     

Mesophase behaviour of laterally di-fluoro-substituted four-ring compounds

Four new groups of the di-fluoro-substituted 4-(2′-(or 3′)-fluoro phenylazo)-2-(or 3-) fluoro phenyl-4″-alkoxyphenylazo benzoates (In–IVn) were prepared and investigated for their mesophase behaviour. An alkoxy group of variable chain length (n = 6, 10 and 14 carbons) is attached to the terminal phenylazo benzoate moiety, and two lateral fluoro substituents are attached individually with different orientations to the other two adjacent rings. The molecular structures of the prepared compounds were confirmed by Fourier transform infrared spectroscopy and ¹H NMR spectroscopy. The study aims to investigate the steric effect of the spatial orientation and relative positions of the two lateral fluorine atoms on the mesomorphic properties in their pure states. The mesophase behaviour was investigated via differential scanning calorimetry and mesophases were identified by polarised light microscopy. The investigation shows that these compounds exhibit high enantiotropic mesophases (SmC and N) and broad mesophase temperature range. The type and stability of the mesophase depends on the length of the terminal alkoxy chain and the position the two fluoro substituents. A comparison between these investigated compounds with their corresponding three-ring analogues was discussed.     

Side group functionalized liquid crystalline polymers and blends VIII. Nematic and SmAre phase formation in hydrogen-bonded blends of smectic side group LC polymers and a low molar mass dopant

Hydrogen-bonded blends based on smectic side group functionalized LC copolymers containing 4-alkyloxybenzoic acid fragments (proton donor) and a non-mesogenic low molecular mass dopant 4-cyanophenyl pyridine-4-carboxylate or 4-methoxyphenyl-d₄ pyridine-4-carboxylate (proton acceptor) were obtained. The blends containing 10-35 mol % of low molecular weight dopant form nematic (I-N-SmA) or re-entrant SmA phases (I-SmA-N-SmAre). The temperature dependence of the order parameter S, the birefringence Δn, and the splay K ₁ and bend K ₃ elastic constants of the nematic phase were studied by ²H NMR spectroscopy and the Fréedericksz method of threshold transitions in a magnetic field. A mechanism for the destruction of the SmA phase and the formation of the nematic phase in the hydrogen-bonded blends is suggested.     

Comparison of membrane assisted liquid–liquid microextraction devices applied to a series of volatile organic compounds in aqueous environmental matrices

An extraction device has been investigated for the separation and preconcentration of a series of volatile organic compounds (CHCl₃, CHCl₂Br, CHClBr₂ and CHBr₃) in aqueous matrices. The device consisted of a microporous membrane system utilising a hollow fibre tube filled with organic solvent directly immersed into the sample solution. The hollow fibre containing 160 µL organic solvent was immersed in a glass vial with 10 mL capacity, and the extraction took place through diffusive transport between the aqueous sample and the small amount of solvent. For validation of the method, some operational conditions, such as extraction solvent, temperature, stirring rate and separation time, were optimised. Limit of detection was at low ppb levels, with GC-MS analysis under selected ion monitoring (SIM), whereas enrichment factors between 22 and 35 were obtained. Good reproducibility with RSDs between 7.2% and 9.8% and large linear dynamic ranges with R ² between 0.996 and 0.998 were also achieved. In addition, the performance of the membrane assisted solvent extraction (MASE) system was compared with two existing configurations: a non-porous membrane separation device, as well as with a comparable microporous configuration. The comparison considered the extraction mechanism and the underlying transport processes. The application to real samples showed a good concordance with classical analytical methods.     

Reflection–absorption infrared sensing device for detection of semivolatile aromatic compounds in soils

In this article, a new IR-sensing device is described for the examination of chlorinated aromatic compounds in soils. To prepare this sensing device, a 20-mL glass vial was modified for use in the analysis of soil samples by conventional Fourier-transform infrared (FT-IR) spectroscopy. In this sampling device, an aluminium plate coated with a hydrophobic film was placed on top of the cap of the sample vial to absorb the analytes that evaporated from the soil matrix. After this absorption process was complete, the cap was placed in an FT-IR spectrometer, and the absorbed analytes were detected in the reflection–absorption (RA) mode. To accelerate the rate of evaporation of the analytes, the soil samples were heated to various temperatures. Meanwhile, other factors, such as the moisture content, sampling time, thickness of the hydrophobic film, and the volatilities and concentrations of the analytes, were also examined to optimize the analytical conditions. The results indicated that the time required to reach equilibrium conditions was short, and evaporation/absorption could be achieved within 10?min. With a water content of 10% (v/w) or less, the intensities of the analytical signals were increased greatly when compared with those of dry samples; when the water content was above 10% (v/w), these intensities decreased, partially as a result of the heating efficiency. After examining the compounds that had different vapour pressures, the analytical results indicated that this method was applicable to the examination of compounds that had vapour pressures below 1.0?Torr. Using the optimal conditions determined in this study, the detection limits for semivolatile aromatic compounds were lower than 100?ng/g, and the regression coefficients of the standard curves for compounds that had a vapour pressure lower than 1.0?Torr were larger than 0.99 in the concentration range of 1–100?µg/g.