添加剂PVP和MTS对合成Beta分子筛结构与性能的影响

分别以铝酸钠和硅溶胶为铝源和硅源,四乙基氢氧化铵为模板剂,在水热条件下,考察了添加剂(聚乙烯吡咯烷酮(PVP)和甲基三乙氧基硅烷(MTS))对合成Beta分子筛结构与性能的影响,并通过XRD、TEM、BET、ICP、~(29)Si-NMR和NH_3-TPD等方法对合成样品进行了结构表征和作用机理讨论,同时以催化裂化异丙苯为模型反应评价其催化性能。结果表明,与传统Beta分子筛相比,加入PVP后所得样品具有更高结晶度和较高的硅铝物质的量比(25.68)以及较大的比表面积(772 m~2/g);而加入MTS后尽管具有较大比表面积(657 m~2/g)和较高硅铝物质的量比(25.76),但是结晶度却相对降低,且粒径减小(160-320 nm)。两种添加剂作用下所得样品均具有更多酸量,在催化裂化异丙苯的反应中表现出较高的催化活性。     

Efficient Synthesis of Cyclic Block Copolymers by Rotaxane Protocol by Linear/Cyclic Topology Transformation

High‐yielding synthesis of cyclic block copolymer (CBC) using the rotaxane protocol by linear‐cyclic polymer topology transformation was first demonstrated. Initial complexation of OH‐terminated sec‐ammonium salt and a crown ether was followed by the successive living ring‐opening polymerizations of two lactones to a linear block copolymer having a rotaxane structure by the final capping of the propagation end. CBC was obtained in a high yield by an exploitation of the mechanical linkage through the translational movement of the rotaxane component to transform polymer structure from linear to cyclic. Furthermore, the change of the polymer topology was translated into a macroscopic change in crystallinity of the block copolymer.     

Two-Step Structure Phase Transition,Dielectric Anomalies,and Thermochromic Luminescence Behavior in a Direct Band Gap 2D Corrugated Layer Lead Chloride Hybrid of [(CH3)4N]4Pb3Cl10

A direct band gap 2D corrugated layer lead chloride hybrid, [(CH₃)₄N]₄Pb₃Cl₁₀ ( 1 ), shows analogous topology to the {Mg₃F₁₀⁴⁻}_∞ layer in Cs₄Mg₃F₁₀, and with the (CH₃)₄N⁺ cations locating in the inorganic layer voids and between the interlayers. Two reversible structural phase transitions occur in 1 at 225/210 K and 328/325 K upon heating/cooling, respectively. On going from the low- to intermediate-temperature phase, the space group changes from P2₁/c to Cmca, and the crystallographic axis perpendicular to the layers is doubled with the order–disorder transformation of (CH₃)₄N ⁺ cations between the interlayers. The intermediate- and high-temperature phases are isomorphic with similar cell parameters and packing structure; their main difference concerns the disorder degree of the (CH₃)₄N ⁺ cations between the interlayers. The two-step structural phase transitions lead to dielectric anomalies around the corresponding T_c. Interestingly, 1 shows multiband emission, originating from the recombination of exciton and emission of defects. Moreover, 1 exhibits divergent thermochromic luminescent features around the T_c on the intermediate to low temperature transition.     

Shape memory induced structural evolution of high performance copolyimides

In this work, two kinds of high temperature shape memory copolyimides were prepared and the shape memory cycles induced structural evolution of macromolecular chains was investigated in detail. The glass transition temperature (T_g) of poly(benzoxazole‐co‐imide) (PI1) and poly(benzimidazole‐co‐imide) (PI2) are 280 °C and 355 °C, respectively. The results show that PI1 could keep stable macromolecular chain structure under shape memory cycles and exhibit outstanding shape memory performance (R_f > 98%, R_r > 97%) under different stretch condition. Whereas, shape memory cycles induced orientation with more ordered macromolecular chains packing is formed for PI2 after several thermal mechanical cycles, which strongly affect physical crosslinking points, thermal mechanical properties as well as shape memory behaviors. The study on macroscopic property and microscopic structure evolution will promote a better understanding of the shape memory effect of polyimides and accelerate development of high performance polyimides for shape memory applications. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3858–3867     

Diffuse scattering of modulated structures and quasicrystals

The method of Fourier transforms is applied to the calculation of sharp (coherent) and diffuse (incoherent) scattering of modulated structures and quasicrystals. It is shown that the fundamental difference between both may best be described by introducing different distribution functions of atoms, before applying modulations of the structure.     

Anomalously high heat capacity of liquids: relation to structural properties

ABSTRACT

Heat capacity of several liquids which demonstrate anomalous behaviour is studied. It is shown that isochoric heat capacity of these liquids shows anomalously high values which is related to smooth structural crossover in these liquids. This phenomenon can be used for qualitative explanation of high heat capacity of water and some other substances.     

A Facile Method for the Separation of Methionine Sulfoxide Diastereomers,Structural Assignment,and DFT Analysis

Methionine (Met) oxidation is an important biological redox node, with hundreds if not thousands of protein targets. The process yields methionine oxide (MetO). It renders the sulfur chiral, producing two distinct, diastereomerically related products. Despite the biological significance of Met oxidation, a reliable protocol to separate the resultant MetO diastereomers is currently lacking. This hampers our ability to make peptides and proteins that contain stereochemically defined MetO to then study their structural and functional properties. We have developed a facile method that uses supercritical CO₂ chromatography and allows obtaining both diastereomers in purities exceeding 99 %. ¹H NMR spectra were correlated with X-ray structural information. The stereochemical interconversion barrier at sulfur was calculated as 45.2 kcal mol⁻¹, highlighting the remarkable stereochemical stability of MetO sulfur chirality. Our protocol should open the road to synthesis and study of a wide variety of stereochemically defined MetO-containing proteins and peptides.     

Green synthesis,characterization, and biological activities of saffron leaf extract-mediated zinc oxide nanoparticles: A sustainable approach to reuse an agricultural waste

To increase the profitability and sustainability of agricultural waste, a facile green approach was established to synthesize zinc oxide nanoparticles (ZnO NPs) using saffron leaf extract as a reducing and stabilizing agent. Structural characteristics of NPs were investigated by X-ray diffraction (XRD), Fourier-transform infrared (FTIR), field emission scanning electron microscopy (FESEM), and UV–Visible (UV–Vis) spectroscopy. Characterization results revealed that ZnO NPs is highly crystalline with a hexagonal wurtzite structure and spherical particles with diameter less than 50 nm, as confirmed by XRD and FESEM techniques. UV–Vis absorption spectra depicted an absorption peak at 370 nm, which confirms the formation of ZnO NPs. FTIR spectral analysis confirmed the presence of functional groups and metal oxygen groups. The biological activities of ZnO NPs were also investigated. The antibacterial effect of ZnO NPs was investigated against selected food pathogens (Salmonella Typhimurium, Listeria monocytogenes, and Enterococcus faecalis). The study results prove that the green synthesized ZnO NPs show enhanced antibacterial activity against S. Typhimurium when compared with other strains. A dose-dependent free radical scavenging activity was observed for ZnO NPs in both 2,2-diphenyl-1-picryl-hydrazyl-hydrate (DPPH) and fluorescence recovery after photobleaching (FRAP) assays. The ZnO NPs were evaluated for their photocatalytic activity during the degradation of methylene blue (MB) dye in aqueous solutions. The maximum removal of MB achieved was 64% with an initial ZnO NP concentration of 12 mg/mL under UV light. The present study revealed that the agricultural waste (saffron leaf) provides a simple and eco-friendly option to sustainably synthesize ZnO NPs for use as a photocatalyst. In addition, this is the first report on saffron leaf-mediated synthesis of ZnO NPs.     

In Situ Synthesis and Characterization of Poly(aryleneethynylene)‐Grafted Reduced Graphene Oxide

Using highly soluble bromo‐functionalized reduced graphene oxide (RGBr) as a key graphene template for surface‐directing Sonogashira–Hagihara polymerization, a novel soluble poly(arylene‐ethynylene)‐grafted reduced graphene oxide, hereafter abbreviated as PAE‐g‐RGO, was prepared in situ. The entirely different electron distribution of LUMO and HOMO of PAE‐g‐RGO suggested the existence of a charge‐transfer (CT) state (PAE^.?–RGO^.+). The negative ΔG_CS value (?2.57 eV) indicates that the occurrence of the charge separation via ¹RGO* in o‐DCB is exothermic and favorable. Upon irradiation with 365 nm light, the light‐induced electron paramagnetic resonance (LEPR) spectrum of PAE‐g‐RGO showed a decrease in the spin‐state density owing to photoinduced intramolecular electron transfer events in this system. A sandwich‐type Al/PAE‐g‐RGO/ITO device showed representative bistable electrical switching behavior. The nonvolatile memory performance was attributed to the CT‐induced conductance changes, which was supported by molecular computation results and conductive atomic force microscopy (C‐AFM) images.