合并带流动注射分光光度法研究硫羟乳酸掩蔽性能

本文运用合并带流动注射分析技术，建立了以Ｙｂ＾３＋ＸＯ显色体系为参考体系研究硫羟乳酸掩蔽性能的方法，在ｐＨ５．６硫羟乳酸能掩蔽Ｓｎ＾４＋，Ｂｉ＾３＋，Ｔｌ＾３＋，Ｈｇ＾２＋，Ｃｕ＾２＋，Ｃｒ＾３＋和Ｃｄ＾２＋测定Ｙｂ＾３＋的线性范围为１．３６×１０＾－６～２．７２×１０＾－５ｍｏｌ／Ｌ，采样频率可达１２０次／ｈ。     

Closed tube sample introduction for gas chromatography-ion mobility spectrometry analysis of water contaminated with a chemical warfare agent surrogate compound

Ion mobility spectrometry (IMS) is a proven technology for detection of vapor phase chemical warfare agents. The technology is suitable for field portable instrumentation due to its small size, high sensitivity, speed of analysis, and low power consumption. However, it suffers from a limited dynamic range and potential difficulties in identifying compounds in complex matrices. The use of gas chromatography (GC) coupled to IMS can overcome the difficulty of chemical identification in mixtures by separating the sample into individual components before detection. Using this approach, IMS technology has previously been adapted to detect biological aerosols using an open tube pyrolyzer and a short GC column (Py-GC-IMS). The open sample introduction tube of a Py-GC-IMS instrument would be a convenient configuration to accept aerosol particulates, and while viewed as needed for aerosol trapping, is not optimal for liquid chemical analyses. To examine the usefulness of an existing Py-GC-IMS system for analysis of chemicals in water, an existing open-port sample interface was replaced with a septum-equipped closed tube injector to contain analyte vapors resulting from liquid injection. Tributylphosphate (TBP) was used as a surrogate chemical warfare agent, and aqueous injections into both closed and open tube assemblies were performed. Sample introduction into the closed tube inlet was also accomplished using solid phase microextraction (SPME) preconcentration. The limit of detection for TBP using an open tube, closed tube, and closed tube configuration with SPME sample introduction was 0.980, 0.196, and 0.0098 mg/L, respectively.     

Eco-friendly synthesis of high silica zeolite Y with choline as green and innocent structure-directing agent

Zeolite synthesis in contemporary chemical industries is predominantly conducted using organic structure-directing agents (OSDAs), which are chronically hazardous to humans and the environment. It is a growing trend to develop an eco-friendly and nuisanceless OSDA for zeolite synthesis. Herein, choline is employed as a non-toxic and green OSDA to synthesize high silica Y zeolite with SiO₂/Al₂O₃ ratios of 6.5–6.8. The prepared Y zeolite samples exhibited outstanding (hydro)thermal stability at ultrahigh temperature owing to the higher SiO₂/Al₂O₃ ratio. The XRF, SEM, ²⁹Si-NMR and ¹³Na+ results suggested that choline plays a structure-directing role in the synthesis of Y zeolite, while the feed molar fraction of Na⁺ is a crucial determinant for the framework SiO₂/Al₂O₃ ratio and the crystal morphology.     

Polymer blends based on the β-modification of polypropylene

iPP/sPP, iPP/rPP, iPP/PVDF and iPP/PA-6 blends, and their β-nucleated forms were prepared in the present study. The components of iPP/sPP and iPP/rPP blends are compatible in the molten state. The phase structure of the melt of iPP/PVDF and iPP/PA-6 blends is heterogeneous. The melting and crystallisation characteristics as well as the structure and polymorphic composition of these blends were studied by polarised light microscopy (PLM) and differential scanning calorimetry (DSC). When semicrystalline polymers are added to iPP, the most important factor of the formation a blend with β-crystalline phase is the α-nucleation effect of the second polymer. In the case of polymers with an α-nucleating effect, the temperature range of their crystallisation should be lower than that of β-iPP. β-nucleated iPP/PVDF and iPP/PA-6 blends are extreme examples showing that completely β-iPP matrix can not form even in the presence of a highly effective β-nucleant, because of the strong α-nucleating ability and higher crystallisation temperature range of PVDF and PA-6. We found that the β-crystallisation tendency of random propylene copolymers can be enhanced by adding an iPP homopolymer.     

火焰原子吸收光谱法研究五种螯合剂对染镉小鼠睾丸中镉钙铁锌浓度的影响

采用火焰原子吸收光谱法分别对染镉小鼠和N-对羟甲苯甲基-D-葡糖二硫代氨基甲酸钠(HBGD)、N-苯甲基-D-葡糖二硫代氨基甲酸钠(BGD)、二乙基二硫代氨基甲酸钠(DDTC)、二巯基丙醇(BAL)、乙二胺四乙酸(EDTA)等五种螯合剂治疗组小鼠睾丸中镉、钙、铁、锌等金属浓度进行了测定和研究.结果表明:镉染毒(Cd 2.5 mg·kg-1,腹腔注射)后,小鼠睾丸中镉、钙、铁、锌等金属浓度显著高于对照组(p＜0.05),染镉30 min后用各螯合剂治疗(0.400 mmol·kg-1,腹腔注射),24 h后除EDTA外,其余螯合剂能明显降低睾丸中镉的浓度并抑制钙、铁、锌浓度的增加(p＜0.05);染镉24 h后注射各螯合剂,治疗24 h后,HBGD、BGD和DDTC显著降低了小鼠睾丸中各金属浓度(p＜0.05);提示HBGD和BGD有望成为染镉中毒的理想解毒剂.     

Synthesis of PNIPAAm-g-P4VP Microgel as Draw Agent in Forward Osmosis by RAFT Polymerization and Reverse Suspension Polymerization to Improve Water Flux

Microgels have unique and versatile properties allowing their use in forward osmosis areas as a draw agent. In this contribution, poly(4-vinylpyridine) (P4VP) was synthesized via RAFT polymerization and then grafted to a poly(N-Isopropylacrylamide) (PNIPAAm) crosslinking network by reverse suspension polymerization. P4VP was successfully obtained by the quasiliving polymerization with the result of nuclear magnetic resonance and gel permeation chromatography characterization. The particle size and particle size distribution of the PNIPAAm-g-P4VP microgels containing 0, 5, 10, 15 and 20 wt% P4VP were measured by means of a laser particle size analyzer. It was found that all the microgels were of micrometer scale and the particle size was increased with the P4VP load. Inter/intra-molecular-specific interactions, i.e., hydrogen bond interactions were then investigated by Fourier infrared spectroscopy. In addition, the water flux measurements showed that all the PNIPAAm-g-P4VP microgels can draw water more effectively than a blank PNIPAAm microgel. For the copolymer microgel incorporating 20 wt% P4VP, the water flux was measured to be 7.48 L∙m⁻²∙h⁻¹.     

Interpretation of Strengthening Mechanism of Densified Wood from Supramolecular Structures

In this study, densified wood was prepared by hot pressing after partial lignin and hemicellulose were removed through alkaline solution cooking. The tensile strength and elastic modulus of densified wood were improved up to 398.5 MPa and 22.5 GPa as compared with the original wood, and the characterization of its supramolecular structures showed that the crystal plane spacing of the densified wood decreased, the crystallite size increased, and the maximum crystallinity (CI) of cellulose increased by 15.05%; outstandingly, the content of O(6)H⋯O(3′) intermolecular H-bonds increased by approximately one-fold at most. It was found that the intermolecular H-bond content was significantly positively correlated with the tensile strength and elastic modulus, and accordingly, their Pearson correlation coefficients were 0.952 (p < 0.01) and 0.822 (p < 0.05), respectively. This work provides a supramolecular explanation for the enhancement of tensile strength of densified wood.     

有机脱模剂中多环芳烃的高效液相色谱测定

建立了有机硅类和金属皂类脱模剂中多环芳烃的高效液相色谱测定方法。方法所用色谱柱为多聚C18(LC-PAH)柱,流动相为乙腈/水,采用梯度淋洗方式,开始时为体积分数40%乙腈,28min后变为82%乙腈,48min后变成100%乙腈,保持8min。方法的线性范围为0.10~200mg/L,线性相关系数为0.9993~1.0000,平均回收率分别为68.55%~101.2%(有机硅类)和75.29%~99.89%(金属皂类),精密度RSD分别为1.6%~8.1%(有机硅类)和1.8%~6.8%(金属皂类),检出限(S/N=3)分别为0.05~0.10mg/L(有机硅类)和0.05~0.20mg/L(金属皂类)。该方法可以满足有机硅类和金属皂类脱模剂中多环芳烃的检测要求。