Butyltin speciation in sediments and biological samples by hydride generation gas chromatography quartz furnace atomic absorption spectrometry; a study of acid leaching procedures and hydride generation

The efficiency of the extraction of butyltin compounds from sediments and biological matter by acid leaching procedures has been evaluated on real samples using the hydride generation gas chromatography quartz furnace atomic absorption (GC AA) speciation method. The most efficient method uses cold pure acetic acid over a period of four hours. Hydride generation using sodium tetrahydroborate (NaBH₄) is dependent on matrix composition and care must be taken to adapt the amount of reactant to the organic content of the sample.     

引导磁场下磁性药物靶向治疗的理论分析

应用电磁场理论，对引导磁场下铁磁性“药物”颗粒在靶向治疗中的受力和运动轨迹进行了分析和研究.得到了磁场、血流和血管壁对铁磁性“药物”颗粒的作用及运动规律.给出了铁磁性“药物”在靶向治疗中可采用的一种新方法——利用体外磁激励装置产生的变化磁场来实现铁磁性“药物”靶向治疗，还给出了采用这种方法实现靶向治疗的条件. 关键词： 磁性药物 靶向治疗 血流动力学 引导磁场     

Theoretical analysis of non-uniform extensional flows in relation to processing rheology and predictions of some constitutive equations

In this paper, a characteristic equation involving the stream function, already given by one of the authors in a previous work for classifying axisymmetric incompressible flows, is re-considered. Non-uniform nearly extensional flows are derived as particular solutions from this equation. Using experimental data in the literature for polymer solutions and melts, it is proved that particular solutions of the characteristic equation lead to kinematics very close to those encountered in the fiber-spinning process. The kinematic equations satisfactorily correlating the fiber-spinning data are used in order to determine the ability of constitutive equations to predict realistic stresses in the flow domain. The rheological parameters of the fluids, obtained from experiments, are used for computation of differential and integral constitutive equations in the spinning conditions. Comparisons with the stress response of adequate constitutive equations are given and discussed.Also affiliated to: Université Joseph Fourier Grenoble I and Institut National Polytechnique de Grenoble, Associé au CNRS (URA 1510)     

基于互联网的转台远程控制监视系统

提出了一种以互联结构基础的远程控制监视系统，使工作人员能够在互联网的任何一个节点上对转台进行远程控制监视，完成调试与诊断任务。这套系统利用控制逻辑与控制表示逻辑分离的思想实现系统拓扑分布于互联网上的结构，并利用发送端自适应调整接收端驱动的流控管理方案，保证控制的实时性和对互联网通讯时延和阻塞的鲁棒性。     

Ultrasound‐assisted extraction method for the simultaneous determination of emerging contaminants in freshwater sediments

Sediments are the fate of several emerging organic contaminants, such as pharmaceuticals, personal care products and hormones, and therefore an important subject in environmental monitoring studies. In the present work, a simple and sensitive method was developed, validated and applied for the simultaneous extraction of atenolol, caffeine, carbamazepine, diclofenac, ibuprofen, naproxen, propranolol, triclosan, estrone, 17‐β‐estradiol and 17‐α‐ethinylestradiol using ultrasound‐assisted extraction from freshwater sediment samples followed by solid‐phase extraction clean‐up and liquid chromatography with tandem mass spectrometry detection. The solvent type and extraction pH were evaluated to obtain the highest recoveries of the compounds. The best method shows absolute recoveries between 54.0 and 94.4% at 50 ng/g concentration. The method exhibits good precision with relative standard deviation ranging from 1.0–16%. The detection and quantification limits ranged from 0.006–0.067 and 0.016–0.336 ng/g, respectively. The developed method was successfully applied to freshwater sediment samples collected from different sites in Jundiaí River basin of São Paulo State, Brazil. The compounds atenolol, caffeine, propranolol and triclosan were detected in all the sampling sites with concentrations of 13.8, 41.0, 28.5 and 176 ng/g, respectively.     

Determination of methylmercury in marine sediment samples: Method validation and occurrence data

The determination of methylmercury (MeHg) in sediment samples is a difficult task due to the extremely low MeHg/THg (total mercury) ratio and species interconversion. Here, we present the method validation of a cost-effective fit-for-purpose analytical procedure for the measurement of MeHg in sediments, which is based on aqueous phase ethylation, followed by purge and trap and hyphenated gas chromatography–pyrolysis–atomic fluorescence spectrometry (GC–Py–AFS) separation and detection. Four different extraction techniques, namely acid and alkaline leaching followed by solvent extraction and evaporation, microwave-assisted extraction with 2-mercaptoethanol, and acid leaching, solvent extraction and back extraction into sodium thiosulfate, were examined regarding their potential to selectively extract MeHg from estuarine sediment IAEA-405 certified reference material (CRM). The procedure based on acid leaching with HNO₃/CuSO₄, solvent extraction and back extraction into Na₂S₂O₃ yielded the highest extraction recovery, i.e., 94 ± 3% and offered the possibility to perform the extraction of a large number of samples in a short time, by eliminating the evaporation step. The artifact formation of MeHg was evaluated by high performance liquid chromatography coupled to inductively coupled plasma mass spectrometry (HPLC–ICP–MS), using isotopically enriched Me²⁰¹Hg and ²⁰²Hg and it was found to be nonexistent. A full validation approach in line with ISO 17025 and Eurachem guidelines was followed. With this in mind, blanks, selectivity, working range (1–800 pg), linearity (0.9995), recovery (94–96%), repeatability (3%), intermediate precision (4%), limit of detection (0.45 pg) and limit of quantification (0.85 pg) were systematically assessed with CRM IAEA-405. The uncertainty budget was calculated and the major contribution to the combined uncertainty (16.24%, k = 2) was found to arise from the uncertainty associated with recovery (74.1%). Demonstration of traceability of measurement results is also presented. The validated measurement procedure was applied to the determination of MeHg incurred in sediments from a highly polluted and scarcely studied area in the Caribbean region.     

龙门山地区水系沉积物中铀含量分布特征

铀元素是具有毒性和放射性的锕系元素之一,对区域环境和人体健康具有极大的危害,开展铀元素污染评价具有重要的现实意义。以龙门山地区主要水系为主要研究对象,采集了大量的水系沉积物样品,对该地区的铀元素分布特征进行了研究。研究表明,大渡河水系沉积物中铀平均质量分数为5.50 mg/kg,绵远河水系沉积物中的铀平均质量分数为3.07 mg/kg,其余河流水系沉积物中铀含量均较低。通过龙门山地区水系沉积物中铀元素分布特征与龙门山地区矿产分布对比发现,煤矿、磷矿开发区是水系主要铀元素来源。     

An experimental study of the effect of the blow-in rate on the size of the flow separation region

Experimental results are presented concerning the effect of the air blow-in rate on the size of the flow separation region downstream of a rearward-facing step at different step heights. The stream function is found from the experimental velocity profiles, the streamline = 0 being taken as the boundary line. It is shown that the separation region increases as the blow-in rate is increased. Generalization of the experimental results for different blow-in rates and step heights has made it possible to obtain an analytical expression describing the location of some characteristic lines in the separation region (boundary streamline, reverse-flow boundary, line of reverse-flow maximum velocity, line of variable-velocity layer thickness, and the displacement thickness line). Velocity profiles are obtained by means of a hot-wire anemometer. Analytical expressions are written as polynomials with unknown coefficients. The results obtained may be helpful in developing techniques for the treatment of heat transfer under flow separation conditions.     

The Kinematic Flow Structure for the Gvirtzman–Gorelick In Situ VOC Remediation System

Potential theory and Stokes' stream function techniques are used to investigate the flow structure around the recirculation system developed by Gvirtzman and Gorelick (1992, 1993), which consists of an extraction well and a gallery (trench) for the recharge of treated water to the aquifer. Analytical formulas are derived for the drawdown, velocity, and stream function for a model in which the extraction well is modeled as a uniformly distributed line sink and the gallery is modeled as a uniformly distributed ring source. Travel times are reported for water particles traveling along the streamlines containing 50 and 90% of the flow for various degrees of well penetration and various radii of the ring source. The travel times along the streamline resulting in the shortest travel time (not necessarily the shortest path) are also reported for various degrees of well penetration and various radii of the ring source. The method completely eliminates the use of numerical finite-difference or finite-element methods and can be used for optimization of technological parameters of this remediation system.