高温水蓄冷空调的原理和理论分析

介绍了一种新型高温水蓄冷空调方案的原理井进行了理论分析。它可利用高至３８℃水的显热或其它材料的相变潜热来蓄冷空调．分析了完全不掺混系统的性能与过冷水流率的关系；给出了完全掺混系统非稳态循环的性能变化；数值计算并讨论了蓄冷水部分掺混系统的温度分层和动态特性、为高温水蓄冷空调系统的设计和运行提供了理论指导．     

Zerstörungsfreie risstiefenbestimmung in Betonbauwerken mittels Radiotracerverfahren

At the Leipzig Technical University a method was developed, which allows to determine nondestructive the crack depth in concrete up to 15 cm. Based on a radiotracer technique the access to only one side of the object is required. The labelling of artificial-made cracks was carried out by use of a transport medium (not miscible with water) on the base of methyl isobutyl ketone (MIBK) and In- 113m as radionuclide. For the calculation of crack depth, measure-geometrical parameters were used. The improvement of the reliability of building-diagnostical interpretation using radio-physical parameters is described. A first application is provided for concrete structures below chemical equipments built as a barrier against ecologically harmful substances (petrol tanks). The intersectional aspect of further qualifications of the technique is emphasized.     

TEM investigation of the formation mechanism of deformation twins in Fe–Mn–Si–Al TWIP steels

The microstructure of a Fe–Mn–Si–Al twinning-induced plasticity (TWIP) steel exhibiting remarkable work hardening rate under uniaxial tensile deformation was investigated using transmission electron microscopy to uncover the mechanism(s) controlling the nucleation and growth of the mechanically induced twins. The results show that the stair-rod cross-slip deviation mechanism is necessary for the formation of the twins, while large extrinsic stacking faults homogenously distributed within the grains could act as preferential sources for the activation of the deviation process. The influence of such features on the thickness and strength of the twins and the resulting mechanical behaviour is discussed and compared to similar works recently performed on Fe–Mn–C TWIP steels.     

非线性光学及其若干新进展

扼要介绍了非线性光学的基本概念及其最近10年来在飞秒激光，半导体材料，光纤通信和光信息存储等若干方面的研究进展。     

Enhanced energy storage and pyroelectric properties of highly (100)-oriented (Pb1−x−yLaxCay)Ti1−x/4O3 thin films derived at low temperature

Highly (100)-oriented (Pb_1?x?yLa_xCa_y)Ti_1?x/4O₃ ($x=0.15$, $y=0.05$; $x=0.1$, $y=0.1$; $x=0.05$, $y=0.15$) thin films were deposited on Pt/Ti/SiO₂/Si substrates at a low temperature of 450?°C via a sol–gel route. It was found that all the (Pb_1?x?yLa_xCa_y)Ti_1?x/4O₃ thin films could be completely crystallized and the content of La/Ca showed a significant effect on the electrical properties of films. Among the three films, the (Pb_1?x?yLa_xCa_y)Ti_1?x/4O₃ ($x=0.1$, $y=0.1$) thin film exhibited the enhanced overall electrical properties, such as a low dielectric loss ($\tan ?\delta <0.08$) and leakage current ($J～4.6\times {10}^{?5}$ A/cm²), a high recoverable energy density (W_re ～ 15 J/cm³), as well as a large pyroelectric coefficient (p ～ 190 μC/m²K) and figure of merit ($F_{\mathrm{d}}^{\prime }～77\mathrm{\mu }\text{C}/{\text{m}}^2$K). The findings suggest that the fabricated thin films with a good (100) orientation can be an attractive candidate for applications in Si-based energy storage and pyroelectric devices.     

SrS∶Eu,Sm光存储机理的研究

采用高温固相反应法在还原气氛下制备了SrS:Eu,Sm样品,利用荧光光谱仪测量了这种光存储材料的激发光谱和发射光谱.将样品用紫外灯(265 nm)照射激发饱和后,再用980 nm的红外激光器激励,利用荧光光谱仪测试得到了峰值位于599 nm的光激励发光光谱.此外还利用热释光谱仪测试了样品的热释光谱.探讨了SrS:Eu,Sm的光存储机理,认为引入的稀土离子在SrS的带隙中形成分裂能级.当用紫外光照射材料时,Eu的电子从基态被激发到激发态或基质材料的导带,其中一部分电子被辅助激活剂Sm的陷阱俘获,实现信息写入.当材料被与陷阱深度相当的红外光激励时,电子陷阱Sm2 俘获的电子才可能跃出俘获能级,与空穴在Eu的激发态和基态能级上复合,多余的能量以可见光的形式释放出来,实现信息读出.     

单壁碳纳米管储氢研究

摘要 利用Gaussian03程序计算出C-H键的键能是1.88eV,键长是0.113nm。已知H-H键能是4.748eV,键长是0.074nm。显然, H-H键能大于C-H键的键能,所以在常温常压下碳纳米管储氢时,以物理吸附H2分子为主,化学形式的C-H键吸附为辅。另外,利用LJ势能函数,计算了H2分子在碳纳米管中C原子所成的六边形中心正上方、C原子正上方以及相邻两C原子中间正上方时H2分子与碳纳米管之间的势能。得到无论管内、管外或者两端,都是H2分子在C原子所成的六边形中心正上方时能量最低。且在管内时H2分子距离管壁的距离是0.320nm,在管外时距离管壁的距离是0.309nm;在两端的管内时距离管壁的距离是0.324nm,在两端的管外时距离管壁的距离是0.313nm。     

小型冷库液体冷媒融霜系统的研究

研究了液体冷媒融霜系统应用于小型冷库制冷系统的性能;介绍了液体冷媒融霜原理和控制操作过程、液体冷媒融霜实验的装置和方法;对实验结果进行了分析;重点通过库温变化、蒸发器进出口温度压力变化、过冷度对系统的影响、系统COP几个方面,研究了液体冷媒融霜应用于小型冷库制冷系统的性能。     

电爆炸丝1维磁流体模型数值模拟

 给出了电爆炸丝1维磁流体模型的具体描述和基本方程,并利用数值方法求解。通过对含电爆炸丝断路开关的电感储能脉冲功率电路模型的计算,给出了电爆炸丝电流、电压随时间的变化,以及电爆炸过程中丝的密度空间分布,膨胀半径随时间的变化,讨论了电爆炸丝长度和初始电压对电爆炸丝电流、电压的影响。     

用小型全息设备做傅里叶变换全息图存储资料实验

阐述了用小型全息设备做傅里叶变换全息图存储资料实验所采用的光路、详细的操作步骤和实验中的关键问题.