受阻胺光稳定剂Chimassorb 119的合成

以N-丁基-2,2,6,6-四甲基-4-哌啶胺和2,4,6-三氯-1,3,5-三嗪为起始原料,经取代、甲基化反应后,与N,N′-二-（3-氨丙基）乙二胺进行亲核取代反应合成了受阻胺光稳定剂Chimassorb 119,总收率可达77.1 %,其结构经¹H NMR和ESI-MS确证。     

Entropy solutions and flux identification of a scalar conservation law modelling centrifugal sedimentation

Centrifugal sedimentation of an ideal suspension in a rotating tube or basket can be modelled by an initial-boundary-value problem for a scalar conservation law with a nonconvex flux function. The sought unknown is the volume fraction of solids as function of radial distance and time for constant initial data. The method of characteristics is used to construct entropy solutions. The qualitatively different solutions, which depend on the initial value and the vessel radial coordinates, are presented in detail along with numerical simulations. Based on the entropy solutions, a new method of flux identification, which does not require any prescribed functional expression, is presented and illustrated with synthetic data.     

新型树枝状受阻胺光稳定剂的设计、合成及性能评价

以二胺类化合物、丙烯酸甲酯、1,2,2,6,6-五甲基哌啶醇为主要原料, 经Michael加成、酯交换反应合成了一系列分子中含四个哌啶胺结构的新型树枝状化合物. 目标产物结构经¹H NMR, ¹³C NMR分析进行了确认. 选取其中一种结构进行抗氧化及抗老化性能测试, 结果表明其抗氧化性能优于主流抗氧剂Irganox B215及受阻胺光稳定剂Tinuvin770, Chimassorb944, Tinuvin622, 其抗老化性能优于受阻胺光稳定剂Tinuvin770.     

Tailoring the desired optical and mechanical performance of polyester‐plasticized PVC films: the role of different light stabilizers on the photo‐degradation

Effect of hindered amine light stabilizer (HALS: C944) and ultraviolet absorbers (UVAs: UV326, UV531) on the photo‐stabilities of polyester‐plasticized poly(vinyl chloride) (PVC) and polyester‐plasticized PVC/pigment yellow (PY) films were studied systematically. Both ultraviolet absorbers (UVAs) and hindered amine light stabilizer (HALS) could slow down the discoloration of polyester‐plasticized PVC and polyester‐plasticized PVC/PY films. However, the addition of UVAs protected polyester‐plasticized PVC films from being discolored and its efficiency is higher than HALS. The specific order of stabilizing effect on the photo‐oxidation is UV326 > UV531 > C944. For the optical performance, both UVAs and HALS could help to maintain the transmittance of visible light after photo‐degradation. The former could effectively adsorb ultraviolet (UV) light and resulted in lower transmittance of UV light. For the polyester‐plasticized PVC/PY systems, even though HALS and UVAs cannot help to maintain the shielding ability in high‐energy visible region after UV irradiation, they can help prevent the loss in transmittance of visible light. The surface morphology exhibited small holes on the surface of the films that contain UV531 or UV326; while large and deep holes were observed on the surface of PVC films without additives, C944‐doped and C944/PY‐doped films, indicating the higher UV‐stabilizing effect of UVAs. With regard to mechanical properties, UVAs and HALS can help to prevent the loss. Our present study systematically revealed the role of different stabilizers on the polyester‐plasticized PVC and polyester‐plasticized PVC/PY systems and paved the way to offer PVC materials with functional optical performance and desired long‐term performance using different light stabilizers. Copyright © 2017 John Wiley & Sons, Ltd.     

树状PAMAM桥联受阻酚的合成与表征

以β-(3,5-二叔丁基-4-羟基苯基)丙酰氯(简称3,5-丙酰氯)为原料,以1.0G聚酰胺-胺(PAMAM)为桥联基,通过酰胺化反应合成2种含有4个受阻酚单元的树状PAMAM桥联受阻酚.通过条件优化实验确定最佳反应条件:n(3,5-丙酰氯)∶n(PAMAM)=6∶1;K2CO3为促进剂;苯和水为反应混合溶剂,其中苯用量为40mL,水用量为9.7mL;反应时间15h;反应温度为25℃,此条件下可以得到纯度较高的2种树状PAMAM桥联受阻酚.红外光谱、核磁共振及质谱分析表明,合成的分子与目标分子结构完全相符.     

Organic hybrid of chlorinated polyethylene and hindered phenol. I. Dynamic mechanical properties

Dynamic mechanical properties and microstructure of an organic hybrid consisting of chlorinated polyethylene (CPE) and 3,9‐bis[1,1‐dimethyl‐2{β‐(3‐tert‐butyl4‐hydroxy‐5‐methylphenyl)propionyloxy}ethyl]‐2,4,8,10‐tetraoxaspiro[5,5]‐undecane (AO‐80) were investigated. The AO‐80 clearly exhibited two second‐order transitions at 6 and 69 °C in addition to the melting: the transition at lower temperature is assigned to the glass transition, and the transition at higher temperature is considered to be caused by the dissociation of hydrogen bond between the hydroxyl groups of AO‐80. When blending with CPE, part of AO‐80 molecules was dispersed into the CPE matrix, and most of them formed an AO‐80‐rich phase. As a result, a novel transition appeared above the glass‐transition temperature of the CPE matrix. It was assigned to the dissociation of the intermolecular hydrogen bond between the α‐hydrogen of CPE and the hydroxyl groups of AO‐80 within the AO‐80‐rich phase. Dynamic mechanical properties and microstructure of CPE/AO‐80 hybrid were controlled by the thermal treatment. It was found that the CPE/AO‐80 hybrid is a good damping material and shows a shape memory effect. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 2285–2295, 2000     

双功能受阻胺光稳定剂GW-540与紫外线吸收剂并用效应的研究

本文用IR、UV、SEM等方法,研究了双功能基受阻胺光稳定剂——三(1,2,2,6,6-五甲基-4-哌啶基)亚磷酸酯(GW-540),与紫外线吸收剂UV-531、UV-327并用时对聚丙烯的防光作用,结果表明:GW-540-UV-531并用体系有良好的防光作用,呈强的协同效应;GW-540-UV-327并用体系呈弱的对抗作用。结果还表明:GW-540对531和327的光分解均有保护作用.电镜研究表明,加入GW-540后,使UV-327在聚丙烯中分散更不均匀,从而影响其效率的发挥。文中提出了两个体系的协同和对抗作用机理。     

General methodology for the chemoselective N-alkylation of (2,2,6,6)-tetramethylpiperidin-4-ol: Contribution of microwave irradiation

A convenient method to access a broad variety of N-alkyl-(2,2,6,6)-tetramethylpiperidin-4-ol compounds is reported. The thermal treatment of a mixture of (2,2,6,6)-tetramethylpiperidin-4-ol and allyl or benzyl bromide derivatives gave the corresponding N–alkylated compounds in good yields while leaving the hydroxyl functional group intact. Whereas 40?h were needed to reach complete conversion, microwave irradiation allowed the reaction time to be reduced (20?min) and improved the yields in most cases.     

Synthesis of novel calix[4]arenes containing organosilicon groups

Metalation of (RSiMe₂)₃CH (1a R = H, 1b R = Me, 1c R = Ph) with lithium diisopropylamide (LDA) or methyllithium in THF gave organolithium reagents (RSiMe₂)₃CLi, which reacted with the formylated calixarene (2), to give the corresponding 5,17-bis[2,2-bis(organosilyl)-1-ethenyl]-25,26,27,28-tetrapropoxycalix[4]arenes (3a, 3b and 3c) via the Peterson olefination. The compounds (RSiMe₂)₃CLi were treated with 25,26,27,28-tetrakis(4-bromobutoxy)calix[4]arene (4) to give 25,26,27,28-tetrakis[4-(tris(dimethylsilyl)methyl)butoxy] calix[4]arene (5a) and 25,26,27,28-tetrakis[4-(tris(trimethylsilyl)methyl)butoxy] calix[4]arene (5b) via nucleophilic substitution reactions. However the compound 25,26,27,28-tetrakis[4-(tris(dimethylphenylsilyl)methyl)butoxy] calix[4]arene (5c) was not obtained, presumably because (PhSiMe₂)₃C- is highly sterically hindered and the reactivity of its derivatives is low. The compound 5a has potential as a core for dendrimers.     

Three-component synthesis of functionalized 5-oxo-4,5-dihydroindeno[1,2-b]pyrans

Summary Protonation of the reactive intermediates produced in the reaction between alkyl(aryl) isocyanides and dialkyl acetylenedicarboxylates by indan-1,3-dione leads to vinylnitrilium cations, which undergo carbon centered Michael type addition with the conjugate base of the CH-acid to produce functionalized 5-oxo-4,5-dihydroindeno[1,2-b]pyrans.