Prediction of adsorption of organic component and water vapour mixture onto activated carbon

A simple isotherm equation is derived for the adsorption of an organic component onto activated carbon in presence of water vapour. The theoretical results are compared with experimental data for toluene-water vapour-activated carbon, which were published byRipperger andGermerdonk [10].

---

Vorhersage der Adsorption einer organischen Komponente und Wasserdampf an Aktivkohle

Zusammenfassung Es wird eine einfache Adsorptionsisotherme abgeleitet, welche die gleichzeitige Adsorption eines organischen Stoffes und Wasser an Aktivkohle beschreibt. Die theoretischen Ergebnisse werden mit experimentellen Resultaten vonRipperger undGermerdonk [10] für Toluol-Wasser-Aktivkohle verglichen.

---

Symbols a _i adsorbate concentration in adsorbent, kg/kg of carbon - a _0i monolayer capacity, kg/kg of carbon - b _i kinetic parameter of theLangmuir equation - E _j adsorption energy in thej-th layer - i i-th component (1 — water vapour, 2 — organic compound) - j j-th layer - m number of layers - n number of adsorbed components - p partial pressure, Pa - p* saturation partial pressure, Pa - p _C water vapour partial pressure at begining of capillary condensation, Pa - surface coverage     

Influence of particle diameter distribution on protein recovery in the expanded bed adsorption process

The General Rate model has been developed and solved to describe protein adsorption in an expanded bed. The model takes into account axial and local variation of particle size distribution (PSD), external and intra-particle mass transfer resistances, and dispersion in liquid phase. The influence of PSD on breakthrough profiles has been analysed. The simulation results show that for a significantly high expanded bed the lower part of the breakthrough curve profiles, calculated for local particle size distribution (LPSD) and for axial average particle size distribution (APSD) are very similar. However, the upper part of breakthrough profiles calculated for LPSD approaches inlet concentration much more slowly than those calculated for APSD. The retention times of the lower part of uptake curves calculated with average particle diameter are constantly shorter than those obtained from LPSD. For the calculation of the dynamic capacity (DC), the LPSD can be replaced by APSD for large expanded bed heights. Using breakthrough profiles calculated for average particle size, DC values are constantly underestimated.     

Dependence of Elution Curve and Adsorption Isotherms of Insulin on composition of Mobile Phase of Frontal Analysis in Reversed Phase Liquid Chromatography

With frontal analysis(FA),the dependence of adsorption isotherms of insulin on the composition of mobile phase in reversed phase liquid chromatography (RPLC) has been investigated,This is also a good example to employ the stoichiometric displacement theory (SDT) for ivestigating solute adsorption in physical chemistry.Six kinds of mobile phase in RPLC were employed to study the effects on the elution curves and adsorption isotherms of insulin.the key points of this paper are:(1) the stability of insulin due to delay time after preparing,the organic solvent concentration,the kind and the concentration of ion-pairing agent in mobile phase were found to affect both elution curve and adsorption isotherm very seriously.(2)To obtain a valid and comparable result,the composition of the mobile phase employed in FA must be as same as possible to that in usual RPLC of either analytical scale or preparative purpose.(3)Langmuir Equation and the SDT were employed to imitate these obtained adsorption isotherms.The expression for solute adsorption from solution of the SDT was found to have a better elucidation to the insulin adsorption from mobile phase in RPLC.     

Adsorption of the fluoride ion on the surface of various faces of a single crystal of silver: a quantum-chemical study

The fluoride ion adsorption from a gas phase on various faces of a single crystal of silver is studied by a density functional method within a cluster model for metal. The adsorption bond energy is found to increase in the series Ag(100) < Ag(111) < Ag(311) < Ag(110). A substantial structural and energetic heterogeneity of various adsorption sites is revealed. The results are utilized to simulate the electrochemical interface between individual faces of a single crystal of silver and aqueous solutions containing the fluoride ion. It is assumed that the adsorption potential may be represented as the sum of two contributions, one of which describes the metal–ion interaction and the other, the ion solvation energy. The plotted adsorption terms take into account partial degradation of the fluoride ion when adsorbed from an aqueous solution. Estimates of discreteness of the electrical double layer are presented. A conclusion on the maximum manifestation of specific adsorption of the fluoride ion for the Ag(100) face is made.Translated from Elektrokhimiya, Vol. 41, No. 2, 2005, pp. 232–238.Original Russian Text Copyright © 2005 by Nazmutdinov, Zinkicheva.This revised version was published online in April 2005 with corrections to the article note and article title and cover date.     

Effect of Enzyme Modification of Corn Grits on their Properties as an Adsorbent in a Skarstrom Pressure Swing Cycle Dryer

Corn grits have been tested as a desiccant in a pressure swing adsorption (PSA) system to produce dry air. Two sizes of unmodified corn grits were tested in the PSA system: 2.16 and 0.978 mm in diameter, which dried moist air to dew points of –42°C and –69°C, respectively. A modification technology has been developed for the corn grits that gives an increase in the operational adsorptive capacity in a pressure swing adsorption system, so that they remove as much moisture from air as molecular sieves at the same conditions. After modification, 2.16 mm corn grits dry moist air to a –56°C dew point and the 0.978 mm corn grits dry air to a –80°C dew point. The modification process creates surface modifications on the corn grits apparently making more adsorption sites easily available. The modification procedure increases the specific surface area of the grits and possibly decreases the crystallinity, which would make more hydroxyl groups available for adsorption of water. Possible applications of using corn grits in the pressure swing adsorption system include industrial gas dryers, sorptive cooling air conditioners, and recycling equipment for industrial solvents.     

Mathematical Modeling of Multicomponent Nonisothermal Adsorption in Sorbent Particles Under Pressure Swing Conditions

A detailed model for nonisothermal sorption of multicomponent mixtures in a single sorbent particle (monodisperse or bidisperse with negligible intracrystalline mass transport limitations) under pressure swing conditions is developed in this study. The dusty-gas model is used to describe the coupling of the molar fluxes, the temperature, the partial pressures and the partial pressure gradients of the components in the pore space of the particle. The variations of the temperature are described by an energy equation in which both convective and conductive modes of heat transport are accounted for. No limitations are imposed on the number of the components in the mixture and on the type of the adsorption isotherm. The model is applied in the investigation of the industrially important air-zeolite 5A system. Two cases with respect to the surrounding gas phase are examined: infinite environment, which is representative for single particle experiments, and finite environment, which is representative for the situation in packed bed adsorbers. It is found that in an infinite environment the external and internal temperature gradients are equally important while in a finite environment the external heat transport limitations are negligible. It is concluded that in modeling the nonisothermal operation of adsorption processes occurring in packed beds it is not necessary to allow for the temperature differences between the gas phase and the surface of the adsorbing particles. Furthermore, if the temperature gradients within the particles can be neglected, only a single temperature equation is needed to describe the energy transport in the bed.     

Competitive adsorption and desorption of a bi-solute mixture: effect of activated carbon type

This study aims to clarify the effects of carbon activation type and physical form on the extent of adsorption capacity and desorption capacity of a bi-solute mixture of phenol and 2-chlorophenol (2-CP). For this purpose, two different PACs; thermally activated Norit SA4 and chemically activated Norit CA1, and their granular countertypes with similar physical characteristics, thermally activated Norit PKDA and chemically activated Norit CAgran, were used. The thermally activated carbons were better adsorbers for phenol and 2-CP compared with chemically activated carbons, but adsorption was more reversible in the latter case. 2-CP was adsorbed preferentially by each type of activated carbon, but adsorption of phenol was strongly suppressed in the presence of 2-CP. The simplified ideal adsorbed solution (SIAS) model underestimated the 2-CP loadings and overestimated the phenol loadings. However, the improved and modified forms of the SIAS model could better predict the competitive adsorption. The type of carbon activation was decisive in the application of these models. For each activated carbon type, phenol was desorbed more readily in the bi-solute case, but desorption of 2-CP was less compared with single-solute. This was attributed to higher energies of 2-CP adsorption.     

Direct electron transfer reaction of glucose oxidase at bare silver electrodes and its application in analysis

The direct electron transfer reaction of glucose oxidase (GOx) at a bare silver electrode is verified. The electron transfer number n = 2, electron transfer coefficient α = 0.45 and rate constant of the electrochemical reaction K_s = 0.1 s⁻¹ are obtained. This communication presents a multimolecular adsorption model to explain the properties of the direct electron reaction between GOx and bare silver electrodes. The residual valence force may be an important factor to ensure a direct electron transfer reaction on the bare electrode. On the basis of the experimental fact that only biologically active GOx exhibits electrochemical activity in solution, a facile analytical method for analyzing the active GOx concentration is developed. The results determined correspond very well to that of a spectrometric method.     

镓改性ZSM-5沸石中镓活性中心的形成与表征

采用脉冲微反体系研究了经不同程度还原和不同镓含量的GaZSM-5沸石的芳构化性能与吡啶吸附红外光谱特征谱带吸收度的关联，证实了1458 cm~(-1)吸收带的用于表征与Ga物种有关的活性中心，并研究了沸石的硅铝比对Ga中心形成和Ga的价态对芳构化性能的影响。结果表明，对Ga含量相同的样品来说，硅铝比愈低，起始Ga中心生成量愈多，高价态与低价态的Ga中心对丙烷芳构化反应都有促进作用。     

Dispersion polymerization of methyl methacrylate: Mechanism of particle formation

The mechanism for the formation of micron-size polymer particles in the dispersion polymerization of methyl methacrylate was investigated by applying dynamic light scattering to monitor the evolution of the average particle size in the early stages of the polymerization. In addition, the contributions of physically adsorbed stabilizer and graft copolymer were evaluated by measuring the bound, unbound (adsorbed), and free stabilizer, and by determining the amount of added stabilizer required in seeded dispersion polymerizations. Twenty nanometer particles (termed nuclei) were the smallest particles detected and are considered to be formed by aggregation of growing polymer chains precipitating from solution as they exceed their critical chain length. Aggregation of these nuclei with themselves and their aggregates continues until mature and stable particles are formed. This occurs when sufficient stabilizer occupies the particle surface which includes both the polymeric stabilizer [poly(vinylpyrrolidone)] and its graft copolymer which is created in situ. The effects of process variables are discussed based on this mechanistic picture of the dispersion polymerization process. © 1994 John Wiley & Sons, Inc.