One-phase supported titanium-based catalyst for polymerization of ethylene. IV. Effect of alkyl group at organoaluminium compound on catalyst performance

The effect of a basic layer (SiO₂—R₃Al intermediate) in the one-phase silica supported titanium-based catalyst was investigated using the simple model catalyst systems obtained by reacting the activated silica gel consecutively with R₃Al and TiCl₄. Mode of the interaction of SiO₂ with R₃Al—resulting in the formation of the basic layer—was observed via analysis of the concentration of the unreacted OH groups on the silica surface employing IR spectroscopy and via analysis of the concentration of aluminium in solvent using AA spectroscopy. It was found that nature of the alkyl group in R₃Al modified the structure of the basic layer, thus influencing the catalyst performance including the concentration of both the sum of Ti²⁺ and Ti³⁺ and the ESR-active Ti (III) centers. The sum of Ti²⁺ and Ti³⁺ ranged from 45 to 52 mol % and the amount of the ESR-active Ti (III) species ranged from 6 to 17 mol % of the all titanium content. A significant effect of alkyl group at organoaluminium compound on the molecular weight distribution of the resulting polymer was observed. © 1996 John Wiley & Sons, Inc.     

Syndioselective propylene polymerizations by ansa-zirconocenium catalyst

The effect of reaction conditions, including catalyst concentration, temperature, and immobilization on support, have been investigated for syndioselective propylene polymerization by the “bare” zirconocenium ion generated from 1,1-diphenyl-methylidene(1-η⁵-cyclopentadienyl)(9-η⁵-fluorenyl)zirconium-dichloride precursor (2). Neither variation of the catalyst concentration nor immobilization of 2 on silica support affect the syndiospecificity of polymerization. The stereoregularity of the syndiotactic polypropylene, as judged from the melting transition temperature and homosteric r-pentad population by ¹³C-NMR, were found to be proportional to polymer molecular weight. These behaviors are compared with a typical isoselective catalyst ethylenebis(4,5,6,7-tetrahydroindenyl) Zr precursor (4). They are in close resemblance in the case of the S-enantiomeric complex of 4, but the racemic mixture of 4 is markedly inferior. The origins of stereo- and regio-errors are discussed. © 1996 John Wiley & Sons, Inc.     

Chain transfer by addition-fragmentation mechanism. VII. Radical polymerization of vinyl monomers in the presence of ethyl 2-[1-(trimethylsilylperoxy)ethyl]propenoate and related compounds

Ethyl 2-[1-(trimethylsilylperoxy)ethyl]propenoate 1 , ethyl 2-[1-(dimethylvinylsilylperoxy)-ethyl]propenoate 2 , ethyl 2-[1-(1-(2-ethoxycarbonyl-1-methyl-2-propenylperoxysilyl)-1-methylethylperoxy)ethyl]propenoate 3 , and 2-phenyl-2-trimethylsilylperoxypropane 4 were synthesized and added to the free radical polymerization of vinylic monomers. 1 and 2 were found to show no homopolymerizability but act as effective chain transfer reagents in radical polymerizations of methyl methacrylate (MMA), styrene (St), and n-butyl acrylate (BA). The estimated chain transfer constants (C_tr) are as follows: C_tr ( 1 ) = 0.15 for MMA, 0.90 for St, and 2.03 for BA at 60°C; C_tr ( 2 ) = 0.12 for MMA, 1.16 for St, and 1.9 for BA at 60°C. ¹H–NMR spectra of poly(St) formed in the presence of 1 is consistent with the view that the polymers bear an oxirane at one terminal and an trimethylsilyloxy fragment at the other end. Moreover, peroxysilane 4 showed very low transfer properties by direct homolytic substitution (SH₂). These findings indicate that the ethyl 2-[1-(substituted dimethylsilylperoxy)ethyl]-propenoates 1–3 undergo chain transfer reaction via a intramolecular homolytic substitution (SHi) following an addition process. Preparation of poly(styrene) up to high conversion in the presence of 3 yielded to the formation of the corresponding polymeric structures bearing hydrolysable C(SINGLE BOND)O(SINGLE BOND)Si(SINGLE BOND)O(SINGLE BOND)C bonds. © 1996 John Wiley & Sons, Inc.     

Nanoparticles from vesicle polymerization: Characterization and kinetic study

The polymerization of isodecyl acrylate (ISODAC) in vesicles made from an anionic surfactant—sodium di-2-ethylhexyl phosphate (SEHP)—and from water is studied by ¹H-NMR, transmission electron microscopy, and quasielastic light scattering. High polymerization rates and high conversion rates are achieved with both water-soluble initiator, K₂S₂O₈ (potassium persulfate), and oil-soluble initiator, AIBN (azoisobisbutyronitrile). ISODAC is probably located inside the vesicle bilayer(s) because of its high hydrophobicity. Particles stable at room temperature with a mean diameter of about 50 nm are obtained. Kinetic orders of ISODAC polymerization are determined and the characterization of the resulting particles during and after polymerization are studied. © 1996 John Wiley & Sons, Inc.     

Polymerization in a magnetic field. X. Solvent effect in poly(methyl methacrylate) synthesis

The effect of a continuous external magnetic field on the free radical polymerization of methyl methacrylate was studied with respect to some properties of the solvents used in the reaction. The studies were performed through dilatometric technique in and out a magnetic field of 0.25 T. Ten different solvents were used to underline the dependence between the magnetic field presence, the reaction medium, and the development of the polymerization process. The intervened magnetokinetic effects are attributed to the changes in the multiplicity of the radical pairs owing to the magnetic field influence. There is an interdependence among the viscosity and molar polarization of the solvents and the magnetic field effect. © 1996 John Wiley & Sons, Inc.     

Steric effects upon transition states of radical addition polymerizations

Transition states (TSs) of radical addition homopolymerization reactions of methyl acrylate, methyl methacrylate, dimethyl itaconate, and N-methyl itaconimide were examined with two-unit radical models using MOPAC (PM3 UHF) semiempirical method. Calculated activation energies (E_as) show good correlations with experimental values. Calculated activation entropies (−ΔS^‡s) are found to be well proportional to E_as. The entropy terms play an important role as well as E_a in radical additions. E_a depends on the angle (θ_rs) between reaction points of radical and of monomer at TS. The bond length between reaction points at TS is constant regardless of monomers studied. The geometries and thermodynamical properties calculated here for TS indicate the importance of steric effects caused by substituted group(s) rather than electronic perturbation energies reported previously. © 1996 John Wiley & Sons, Inc.     

Miniemulsion polymerization of methyl methacrylate with dodecyl mercaptan as cosurfactant

Miniemulsions of methyl methacrylate with sodium lauryl sulfate as the surfactant and dodecyl mercaptan (DDM) as the cosurfactant (or hydrophobe) were prepared and polymerized. The emulsions were of a droplet size range common to miniemulsions and exhibited long-term stability (greater than 3 months). Results indicate that DDM retards Ostwald ripening and allows the production of stable miniemulsions. When these emulsions were initiated, particle formation occurred predominantly by monomer droplet nucleation. The effects of the concentration of surfactant, cosurfactant and initiator were determined. Rates of polymerization, monomer droplet sizes, polymer particle sizes, molecular weights of the polymer, and the effect of initiator concentration on the number of particles vary systematically in ways that indicate predominant droplet nucleation in these systems. © 1996 John Wiley & Sons, Inc.     

The synthesis and cationic polymerization behavior of ambifunctional monomers

The synthesis of a novel series of ambifunctional monomers containing cationically polymerizable vinyl and 1-propenyl ether or 1-butenyl ether groups in the same molecule has been carried out. Studies of the onium salt-induced photopolymerizations of these monomers indicate that both functional groups are highly reactive and that they undergo extensive copolymerization. © 1996 John Wiley & Sons, Inc.     

The use of carbon black-supported sulfuric acid to initiate the cationic polymerization of cyclic ketene acetals

Stable polymers were made by the cationically initiated 1,2-polymerization of cyclic ketene acetals employing heterogeneous, activated carbon-supported sulfuric acid catalysts. A methodology has been established for the preparation of the carbon black of different acidic strengths. By adjusting either the acid strength or the amount of carbon black used, cyclic ketene acetals with different activities can be polymerized efficiently to form stable high molecular weight polymers. This methodology will be a useful tool for polymerization, copolymerization, and studies of the relative reactivities of the cyclic ketene acetals. The polymer structures were determined by FTIR, ¹³C-NMR, and ¹H-NMR studies. © 1996 John Wiley & Sons, Inc.