Revisiting the Chemistry of Vinylpyrazoles: Properties,Synthesis, and Reactivity

Vinylpyrazoles, also known as pyrazolyl olefins, are interesting motifs in organic chemistry but have been overlooked. This review describes the properties and synthetic routes of vinylpyrazoles and highlights their versatility as building blocks for the construction of more complex organic molecules. Concerning the reactivity of vinylpyrazoles, the topics surveyed herein include their use in cycloaddition reactions, free-radical polymerizations, halogenation and hydrohalogenation reactions, and more recently in transition-metal-catalyzed reactions, among other transformations. The current state of the art about vinylpyrazoles is presented with an eye to future developments regarding the chemistry of these interesting compounds. Styrylpyrazoles were not considered in this review, as they were the subject of a previous review article published in 2020.     

Design,Synthesis, and In Vitro and In Vivo Antifungal Activity of Novel Triazoles Containing Phenylethynyl Pyrazole Side Chains

A series of triazole derivatives containing phenylethynyl pyrazole moiety as side chain were designed, synthesized, and most of them exhibited good in vitro antifungal activities. Especially, compounds 5k and 6c showed excellent in vitro activities against C. albicans (MIC = 0.125, 0.0625 μg/mL), C. neoformans (MIC = 0.125, 0.0625 μg/mL), and A. fumigatus (MIC = 8.0, 4.0 μg/mL). Compound 6c also exerted superior activity to compound 5k and fluconazole in inhibiting hyphae growth of C. albicans and inhibiting drug-resistant strains of C. albicans, and it could reduce fungal burdens in mice kidney at a dosage of 1.0 mg/kg. An in vivo efficacy evaluation indicated that 6c could effectively protect mice models from C. albicans infection at doses of 0.5, 1.0, and 2.0 mg/kg. These results suggested that compound 6c deserves further investigation.     

2-[2-羟基-3-叔丁基-5-(3-甲氧羰乙基)苯基]-5-氯-2H-苯并三唑的合成

以对羟基苯丙酸甲酯和对氯邻硝基苯胺为原料经过烷基化、重氮化、偶合、还原环化和酯化反应合成了2-[2-羟基-3-叔丁基-5-（3-甲氧羰乙基）苯基]-5-氯-2H-苯并三唑紫外线吸收剂,反应总收率为36.83％。用质谱（MS）和核磁共振（1H—NMR）谱图表征了产物的结构,测定了产物的透光率和紫外吸收,表明产物是-类性能优良的新型苯并三唑紫外线吸收剂。     

手性大孔磷酸镓Hit-5的水热合成与晶体结构

本文采用水热合成法制备了一个三维手性大孔开放骨架磷酸镓Ga16P16O75·4[1,6-C6H18N2]·[C2H10N2]·2H2O(简称Hit-5).反应起始原料摩尔配比为:1 GaOOH:15 H3PO4:7.5 H2N(CH2)6NH2:0.5 C2H8N2:555 H2O.Hit-5属正交晶系,P21212空间群,晶胞参数:a=0.8671(1)nm,b=1.7945(1)nm,c=0.9101(1)nm,β=108.33(1)°,V=1.3443(2)nm3,Z=4.Hit-5的骨架是由Ga3P3六聚体和Ga4P4八聚体两个不同的二级结构单元通过共顶点联接构成三维纳米孔结构,在[001]方向呈现16-元环孔道.     

Facile Fabrication of 1-Methylimidazole/Cu Nanozyme with Enhanced Laccase Activity for Fast Degradation and Sensitive Detection of Phenol Compounds

Facile construction of functional nanomaterials with laccase-like activity is important in sustainable chemistry since laccase is featured as an efficient and promising catalyst especially for phenolic degradation but still has the challenges of high cost, low activity, poor stability and unsatisfied recyclability. In this paper, we report a simple method to synthesize nanozymes with enhanced laccase-like activity by the self-assembly of copper ions with various imidazole derivatives. In the case of 1-methylimidazole as the ligand, the as-synthesized nanozyme (denoted as Cu-MIM) has the highest yield and best activity among the nanozymes prepared. Compared to laccase, the K_m of Cu-MIM nanozyme to phenol is much lower, and the v_max is 6.8 times higher. In addition, Cu-MIM maintains excellent stability in a variety of harsh environments, such as high pH, high temperature, high salt concentration, organic solvents and long-term storage. Based on the Cu-MIM nanozyme, we established a method for quantitatively detecting phenol concentration through a smartphone, which is believed to have important applications in environmental protection, pollutant detection and other fields.     

矿化剂浓度和温度对水热法合成氧化锌晶体形态的影响

采用水热法，通过改变矿化剂浓度和温度合成了具有不同形态的氧化锌晶体。在较低的温度(350℃)，填充度为35％。矿化剂KOH浓度小于2mol／L时，只合成了氧化锌微晶。当矿化剂KOH浓度大于3mol/L时，合成出多种形态氧化锌晶体，大的晶体达到几十到几百微米，小晶体仅几微米。当矿化剂KOH浓度从4mol／L增加到5mol／L时，晶体的大小没有明显改变。在高矿化剂条件下合成的晶体显露完整的晶面结构，主要显露柱面m{1010}、锥面p{1011}、负极面O面{0001}，有时也显露Zn面{0001}。晶体表面出现斑坑，显示出晶体的表面缺陷。在430℃，填充度为35％，矿化剂KOH浓度大于1．5moL／L时。合成了多种形态氧化锌晶体，大晶体有几十到几百微米，小晶体仅几微米。当矿化剂KOH浓度为2mol／L，KBr浓度为lmol/L时，最大晶体的长度达到1mm。矿化剂KOH浓度为4mol/L时，晶体没有增大。粒度较大的氧化锌晶体形状多为六棱锥体，显露柱面m{1010}、锥面p{1011}、负极面O面{0001}。晶体表面光滑，完整性好。质量高于350℃时合成的晶体。     

Preparation of CdO nanoparticles by mechanochemical reaction

CdO nanoparticles of 43 nm in crystal size were successfully synthesized by the mechanochemical reaction (CdCl₂ + Na₂CO₃) with NaCl as a diluent and subsequent thermal treatment at 700°C for 2 h. The samples were characterized by differential thermal analysis (DTA), thermogravimetric analysis (TGA), X-ray diffraction (XRD) and transmission electron microscopy (TEM). Effect of calcination temperature on the crystal size of CdO nanoparticles was primarily investigated. The apparent activation energy of CdO nanoparticle formation during thermal treatment was calculated to be 12.2 kJ/mol.     

用时滞和阶跃序列组合生成网格多涡卷蔡氏混沌吸引子

提出了在规范型蔡氏电路中生成两种不同类型网格多涡卷混沌吸引子的新方法.与现有文献报道仅构造同一类型非线性函数产生多涡卷混沌吸引子的主要差别在于,这种方法能在一个蔡氏电路中同时构造时滞序列和阶跃序列,并通过其不同的组合方式来扩展相空间中指标2的鞍焦平衡点,从而生成两种不同类型的网格多涡卷混沌吸引子.理论分析、数值模拟和电路实验结果证实了该方法的可行性. 关键词： 规范型蔡氏电路 网格多涡卷混沌吸引子 时滞序列和阶跃序列 电路实现     

汽车整车非线性动力计算

通过轿车副车架橡胶支承的动态特性试验和理论分析,实现橡胶支承迟滞特性的数学建模和参数识别。利用所建模型重构恢复力-位移迟滞回线,并与试验结果比较表明所建模型的正确性。介绍了具有线性和非线性连接子结构的自由界面模态综合法的基本原理,并采用该方法建立了考虑副车架橡胶支承迟滞特性的整车非线性动力学模型,用所建模型对汽车动力特性进行了数值仿真,并通过试验对仿真结果进行验证。     

岩土材料应变局部化的有限元分析方法

采用有限单元法分析岩土材料的应变局部化时经常会遇到单元尺寸敏感性问题和网格锁定问题。自适应网格技术能够有效地解决网格锁定问题,但仍然无法克服计算结果对单元尺寸的依赖性,尽管在一维情况下被证明是可行的。复合体理论(均匀化理论)和弱非连续有限元方法可以成功地解决岩土材料的单元尺寸敏感性问题,在一维情况下两类方法实际上是一致的。本文针对岩土材料应变局部化的有限元新技术所存在的若干问题进行了详细的讨论,并给出了有关算例。