新型重整催化剂的研究—Pt／BaKL型沸石中钡的作用

本文采用XRD,NH_3-TPD,IR以及TEM等方法考察了Pt/BaKL沸石中Ba~(2+)的作用。NH_3-TPD结果表明,交换Ba~(2+)后的L型沸石的酸性,由于阳离子的作用仅在弱酸范围内有些改变,但与载铂的沸石的催化活性无明显的对应关系。IR及XRD谱线表明,BaKL沸石中Ba~(2+)在最佳交换度(26.3%)时,随预培烧温度的提高,使Ba~(2+)处于沸石孔道中B、C、D位置,接近于最佳分布,此时IR谱线上1421cm~(-1)处有一新峰。当沸石负载铂后,因铂与Ba~(2+)的相互作用,新峰消失,导致铂粒在沸石上分布更加均匀;铂粒在1.5—3.0nm之间占有最大比例,使得Pt/BaKL沸石呈现芳构化活性及选择性高于Pt/KL沸石,分别为～98%和～95%。     

Reaction of η5-cyclopentadienylbis(triphenylphosphine)cobalt(I) with alkadiynes. Preparation and reactions of bicyclic cobalt metallocycles and a stable trimethylsilyl-substituted mono-complexed alkadiyne. Comments on the mechanism of cobalt-catalyzed alkyne cooligomerization

Reactions of η⁵-cyclopentadienylbis(triphenylphosphine)cobalt(I) (5) with several 2,n-alkadiynes (2) were investigated. Each of these reactions leads initially to a material in which one of the acetylene functional groups is π-coordinated to cobalt; this complex then undergoes conversion to a metallocycle. In cases where the two acetylene functions are connected by three- and four-carbon bridges (2b, 2c), metallocycles formed by intramolecular reaction of two acetylene functions in the same molecule may be isolated. In cases where the acetylene functions are joined by larger or smaller bridges, the reactions are more complex, and both inter- and intramolecular metallocycles are formed. Reactions of 5 with 1,8-bis(trimethylsilyl)-1,7-octadiyne (16) gives an isolable crystalline mono-acetylene complex (17), this material is stable in the solid state but undergoes conversion to metallocycle (18) in benzene solution. The relationship of these results to the mechanism of the CpCo(CO)₂-catalyzed benzocycloalkene synthesis is discussed; it is suggested that intramolecular metallocycles are intermediates in reactions leading to benzocyclopentanes and -cyclohexenes, but intermolecular metallocycles are probably involved in reactions leading to benzocyclobutenes.     

Substituted pyrazine-di-N-oxides as the mediators of catalytic oxidation of organic compounds

The mechanism of oxidation of 2,5-dimethyl-, 2,3,5,6-tetramethyl-, 2,3-dimethyl-5,6-cyclohexa, and 3-phenyl-5,6-cyclohexapyrazine-di-N-oxides is studied by cyclic voltammetry, quantum chemical simulations, and ESR electrolysis. The studies are carried out on electrodes of glassy carbon and Pt in 0.1 M LiClO₄ solutions in acetonitrile. ESR spectra of radical cations of substituted pyrazine-di-N-oxides are recorded. The effects of the temperature, oxygen, and the additions of water, pyridine, and acid on the shape of cyclic voltamograms and the intensity of ESR signals of pyrazine-di-N-oxides are studied. A quantum-chemical simulation of the reaction of pyrazine-di-N-oxide radical cations with acetonitrile is carried out. The oxidation of substituted pyrazine-di-N-oxides is described by the E₁C₁E₂C₂ mechanism, which includes the stage of the formation of a complex between the di-N-oxide radical cation and acetonitrile.     

Calculation of the proton affinities of polyfluorobenzenes and the activation energies for 1,2-hydrogen shifts in their carbocations

Isolated polyfluorobenzene (PFB) molecules and their protonated forms are investigated by the AM1 method with full geometry optimization. The proton affinities of PFB are estimated for different protonated positions. The proton affinity of PFB averaged over all isomers is shown to decrease monotonically as the number of fluorine atoms in the molecule increases. The relative populations of different isomers of arenonium ions (AI) formed by PFB protonation are determined. From the calculated data, the value of ⁺ for the F atom in theipso-position is estimated as 1.00. The activation energies of the 1,2-hydrogen shifts in AI are calculated. The dependences of the proton affinity and the activation energies of 1,2-hydrogen shifts on the number of halogen atoms are found to have distinct characters for PFB and polychlorobenzenes. The physical reasons for these difference are discussed.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp. 1878–1882, November, 1993.     

Chemistry of metal hydrides : XXI. Insertion of acetylenes into palladium hydrides

trans-Pd(NO₃)H(PCy₃)₂ (I) when treated with Et₄NCl forms the hydride trans-PdClH(PCy₃)₂ which in turn reacts with AgPF₆ in acetonitrile to give trans-[PdH(CH₃CN)(PCy₃)₂]PF₆ (III). Both I and III react smoothly with acetylenes containing one electron-withdrawing group to give alkenyl products. The geometry of the resulting alkenyl ligand implies that cis addition has occurred and that the hydridic hydrogen adds to the acetylenic carbon containing the electron-withdrawing group.Acetylenes containing two electron-withdrawing groups give mixtures from which both alkenyl and zerovalent acetylene compounds can sometimes be isolated. In the presence of proton sponge, monosubstituted acetylenes still give alkenyl products while those substituted with two electron-withdrawing groups give the zerovalent products in good yield. The relevance of these results to an understanding of the nature of the migratory insertion reaction is discussed.     

On the mathematical formulation and interpretation of LACO MO theory

The mathematical basis of LCAO MO theory is studied, both within the Hartree-Fock approximation and in more exact formulations. The basic LCAO expansion for molecular orbitals ¦> in terms of atomic orbitals ¦x> is conveniently written ¦> = ¦x> S ^–1 B where S is the overlap matrix for atomic orbitals and B is the matrix of atomic orbital-molecular orbital overlaps. It is suggested that matrices P and Q, defined by P=B B and Q=BnB where n is the matrix of molecular orbital occupation numbers, are appropriate to the interpretation of molecular calculations in terms of atomic orbital components, electronic populations and the degree of bonding. Implications for Hartree-Fock calculations are investigated.     

Functionalized naphthol[2,3-h] quinoline-7,12-diones

The addition of secondary and primary amines to ethyl (1-amino-9,10-anthraquinon-2-yl)propynoate affords an easily separable mixture of the corresponding ethyl 3-dialkylaminoor 3-alkylamino-3-(1-amino-9,10-anthraquinon-2-yl)acrylate and 3-dialkylamino- or 3-alkylaminonaphthol[2,3-h]quinoline-2(1H), 7,12-trione (in ∼4: 1 ratio). Intramolecular cyclization of the resulting substituted ethyl acrylates results in the formation of 4-dialkylaminoor 4-alkylamino-2-chlorinated pyridine rings. Subsequent nucleophilic substitution of the chlorine atom gives 2-functionalized 4-dialkylamino- or 4-alkylaminonaphtho[2,3-h]quinoline-7,12-diones. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp. 2327–2332, November, 1998.     

Modeling and simulation of free radical polymerization of styrene under semibatch reactor conditions

The first part of this approach is concerned with the elaboration of a radical polymerization model of styrenne, based on a kinetic diagram that includes chemical and thermal initiation, propagation, termination by recombination and chain transfer to the monomer. Furthermore, volume contraction during polymerization is considered, as well as the gel and glass effects. The mathematical formalism that describes the model in terms of moments is explored in detail. The model was then used to predict the changes in monomer conversion and molecular weight after intermediate addition of initiator and monomer. The results of this operation are dependent on the conditions of the reaction mass, quantity, and moment of substance addition. Therefore, the simulations were performed at different times with respect to the gel effect; before, during and after this phenomenon, and also with respect to different temperatures and initiators. Increasing the initiator concentration before the gel effect leads to an earlier appearance of the phenomenon and to a decrease in molecular weight. The ratio reveals a polydispersity index smaller for the intermediate addition of initiator. No significant changes take place during or after the gel effect. If along with the initiator, unreacted monomver (used to dissolve the initiator) enters the reactor, a small dip in conversion is observed. The general conclusion of this paper reveals the intermediate addition of initiator as a method to control polymer properties and to prevent the “dead-end” polymerization of styrene.     

Free energies of transfer of alkali halides from water to urea-water mixtures at 25°C from EMF measurements

The standard potentials_s E ^o of M/M⁺ (M=Li, Na, K, Rb, and Cs) electrodes in aqueous urea solutions containing 12, 20, 30 and 37% by weight of urea have been determined at 25°C from emf measurements on the cell M(Hg)/MCl (m), solvent/AgCl–Ag, from the activities of metals in amalgams by use of a similar type of cell in water, and from the values of_s E ^o of the Ag/AgCl electrode determined earlier. The standard free energies of transfer of MCl, G _t ^o (MCl), from water to the mixed solvents, computed by use of these values and those for the Ag–AgCl electrode, rise sharply from Li⁺ to Na⁺ but fall from Na⁺ to K⁺ and rather sharply from K⁺ to Cs⁺ with a maximum at Na⁺ in all the solvent compositions. This has been attributed to the superimposition of soft-soft interactions on the electrostatic interactions between the ions and the negative charge centers of the possible hydrogen-bonded solvent complexes in the mixed solvents. Comparison of G _t ^o (i) values for individual ions, obtained by a simultaneous extrapolation procedure, with those in aqueous mixtures of methanol,t-butanol, and dimethyl sulfoxide leads to the conclusion that the solvation of these ions in all these solvents is chiefly dictated by the acid-base type of ion-solvent interactions.     

Observations on the swelling characteristics of the zwitterionic hydrogel of poly(1-3-sulfopropyl)-2-vinyl-pyridinium-betaine hydrogel

Samples of poly[1-(3-sulfopropyl)-2-vinyl-pyridinium-betaine] (PSPV) have been synthesized to high conversion by free radical polymerization in aqueous solution of the zwitterionic monomer SPV with several concentrations of the crosslinker N,N′-methylene-bis-acrylamide (MBA). The densities of the resultant xerogels increased regularly with the content of MBA. Hydrogels obtained by swelling them in water and aqueous KSCN solution were examined by gravimetric and dimensional analysis. The water contents increased with decreasing content of MBA, the value of 92.7 wt% at the lowest MBA content being higher than that for other zwitterionic hydrogels. Enhanced swelling occurred in 1 M aq. KSCN at each MBA content, the total swelling being 98.1 wt% at the lowest crosslinker content. Swelling increased with increasing temperature. An approximate procedure to formulating swelling equilibrium in term of the volume fraction of water in hydrogel, in conjunction with the van’t Hoff equation, yields a small positive value for the enthalpy of swelling. This is compared with values derived similarly for other hydrogels.