Dense Sphene-type Solid Electrolyte Through Rapid Sintering for Solid-state Lithium Metal Battery

The sphene-type solid electrolyte with high ionic conductivity has been designed for solid-state lithium metal battery. However, the practical applications of solid electrolytes are still suffered by the low relative density and long sintering time of tens of hours with large energy consumption. Here, we introduced the spark plasma sintering technology for fabricating the sphene-type Li_1.125Ta_0.875Zr_0.125SiO₅ solid electrolyte. The dense electrolyte pellet with high relative density of ca. 97.4% and ionic conductivity of ca. 1.44×10^-5 S/cm at 30℃ can be obtained by spark plasma sintering process within the extremely short time of only ca. 0.1 h. Also the solid electrolyte provides stable electrochemical window of ca. 6.0 V(vs. Li⁺/Li) and high electrochemical interface stability toward Li metal anode. With the enhanced interfacial contacts between electrodes and electrolyte pellet by the in-situ formed polymer electrolyte, the solid-state lithium metal battery with LiFePO₄ cathode can deliver the initial discharge capacity of ca. 154 mA·h/g at 0.1 C and the reversible capacity of ca. 132 mA·h/g after 70 cycles with high Coulombic efficiency of 99.5% at 55℃. Therefore, this study demonstrates a rapid and energy efficient sintering strategy for fabricating the solid electrolyte with dense structure and high ionic conductivity that can be practically applied in solid-state lithium metal batteries with high energy densities and safeties.     

Kinetics of the transformation process of PbSO4 to PbO2 in a lead anodic film

The kinetics of the nucleation and growth of PbO₂ during the potentiostatic oxidation of PbSO₄ in a lead anodic film was studied using linear sweep voltammetry, potential-step and ac impedance tracing methods. The film investigated is the partially reduced anodic PbO₂ film formed by polarizing a lead electrode in 4.5 M H₂SO₄ solution first at 1.3 V vs. Hg|HgSO₄ for 20 min and then at 0.9 V for 5 min. The nucleation and growth process begins some time after the potential step and is completed within 60 s. The pre- and post-nucleation and growth processes correspond to the growth of the anodic film formed by the oxidation of the lead substrate. The mathematical equations representing the current-time and capacitance-time transients are derived taking the background oxidation current into account. The experimental results are well fitted by these equations. The process obeys the laws of two-dimensional instantaneous nucleation and growth.     

Carbon anode materials from polysiloxanes for lithium ion batteries

Three kinds of silicon-containing disordered carbons have been prepared by pyrolysis of polysiloxanes with different amounts of phenyl side groups. X-ray powder diffraction, X-ray photoelectron spectroscopy and electrochemical capacity measurements were performed to study their behaviors. Graphite crystallites, micropores, and silicon species affect their electrochemical performances. All of them present high reversible capacities, >372 mAh/g. Since the graphite crystallites are very small, they contribute very little to reversible capacity. The number of micropores produced by gas emission during the heat-treatment process decides whether they exhibit reversible capacity. Si mainly exists in the form C–Si–O and influences the irreversible capacity. There is no evident capacity fading in the first ten cycles, indicating promising properties for these disordered carbons.     

High Lithium Capacity MxV2O5Ay·nH2O for Rechargeable Batteries

The aqueous synthesis and electrochemical properties of nanocrystalline M_xV₂O₅A_y·nH₂O are described. It is easily and quickly prepared by precipitation from acidified vanadate solutions. M_xV₂O₅A_y·nH₂O has been characterized by X-ray powder diffraction, electron microscopy, TGA, chemical analyses, and electrochemical studies. The atomic structure is related to that of xerogel-derived V₂O₅·nH₂O. In M_xV₂O₅A_y·nH₂O, M is a cation from the starting vanadate salt and A is an anion from the mineral acid. This material exhibits high, reversible Li capacity and may be considered for use in a cathode in primary and secondary batteries. The lithium capacity of an electrode composed of M_xV₂O₅A_y·nH₂O/EPDM/carbon (88/4/8) is ∼380(mA h)/g (C/80 rate) and the energy density is ∼1000(W h)/kg (120-μm-thick cathode, 4-1.5 V, versus Li metal anode). Critical parameters identified in the synthesis of M_xV₂O₅A_y·nH₂O, with respect to achieving high Li-ion insertion capacity, are acid/vanadium ratio, starting vanadate salt, and temperature. Inclusion of carbon black in the synthesis yields a composite that maintains the high Li capacity, lowers the electrochemical-cell polarization, and preserves the lithium capacity at higher discharge rates. Li-ion coin cells, using pre-lithiated graphite anodes, exhibit electrochemical performance comparable to that of Li-metal coin cells.     

锂离子电池用多孔硅/石墨/碳复合负极材料的研究

在两步高能球磨和酸蚀条件下制得了多孔硅/石墨复合材料，并对其进行碳包覆制成多孔硅/石墨/碳复合材料。通过TEM，SEM等测试手段研究了多孔硅材料的结构。作为锂离子电池负极材料，电化学测试结果表明多孔硅/石墨/碳复合材料相比纳米硅/石墨/碳复合材料有更好的循环稳定性。同时，改变复合体配比、热解碳前驱物、粘结剂种类和用量也会对材料的电化学性能产生较大的影响。其中使用质量分数为10％的LA132粘结剂的电极200次循环以后充电容量保持在649.9 mAh·g^-1，几乎没有衰减。良好的电化学性能主要归因于主活性体-多孔硅颗粒中的纳米孔隙很好地抑制了嵌锂过程中自身的体积膨胀，而且亚微米石墨颗粒和碳的复合也减轻了电极材料的体积效应并改善了其导电性。     

Electrolytic Co3O4 for thin-layer anodes of lithium-ion batteries

Electrolytic (e) cobalt oxide of a spinel structure, e-Co₃O₄, is obtained from the sulfate and nitrate (aqueous, water-alcohol) solutions containing Co²⁺ with the aim of using it in thin-layer anodes of lithium-ion batteries. The physicochemical and structural properties of the synthesized compounds are examined using thermal and x-ray diffraction analyses, absorption IR spectroscopy, and atomic force microscopy. The electrochemical characteristics of e-Co₃O₄ are determined in breadboards of lithium power sources and in the lithiumion system LiCoO₂/e-Co₃O₄.     

Nb 掺杂LiFePO4/C 的一步固相合成及电化学性能

用固相法一步合成了Nb掺杂的LiFePO4/C复合材料, 研究了Nb掺杂量对材料电化学性能的影响. 结果表明, Nb掺杂后LiFePO4/C复合材料的电化学性能明显提高. 在0.5C、1C和2C充放电倍率下, 名义成分为Li0.96Nb0.008FePO4/C正极材料的比容量分别为161、148和132 mAh•g−1, 已达到实用化水平. 阻抗谱和循环伏安特性测试显示, Nb掺杂有效地降低了复合材料电极的阻抗和极化, 说明Nb掺杂的主要作用是提高了LiFePO4的电子电导率.     

添加剂对SiO电性能的影响及其机理分析

SiO_x/CoO and SiO/Li₂CO₃ composite materials were prepared by mechanical ball-milling. The structures of the obtained materials were characterized by X-ray diffraction (XRD). And scanning electron microscopes (SEM) of three samples after 20 cycles were also given. In addition， the electrochemical performances of three materials with galvanostatic charge-discharge cycling were investigated. The results show that the composite samples have larger initial reversible capacities and better cycle performance than pure SiO. Also，a schematic diagram showing the buffer effects of Li₂CO₃ addition and the mechanism of improving electrochemical performance by adding Li₂CO₃ are suggested.     

Surface film formation on a graphite electrode in Li‐ion batteries: AFM and XPS study

The formation of a passivation film (solid electrolyte interphase, SEI) at the surface of the negative electrode of full LiCoO₂/graphite lithium‐ion cells using LiPF₆ (1M ) in carbonate solvents as electrolyte was investigated by means of x‐ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM). The analyses were carried out at different potentials of the first and the fifth cycles, showing the potential‐dependent character of the surface‐film species formation. These species were mainly identified as Li₂CO₃ up to 3.8 V and LiF up to 4.2 V. This study shows the formation of the SEI during charging and its partial dissolution during discharge. Copyright © 2005 John Wiley & Sons, Ltd.     

一维棒状ZnO的制备及电化学嵌锂性能研究

目前,商业化锂离子电池一般采用石墨作为负极材料,因其电位与金属锂电极的电位很接近,所以当电池反复循环和过充时,石墨表面易析出金属锂,会因形成枝晶而短路。在温度过高时还容易引起热失控。同时,锂离子电池的容量在很大程度上取决于负极的锂嵌入量,而且石墨材料容量相对较低