Development of a “Built-in” Scanning Near Field Microscope Head for an Atomic Force Microscope System and Stress Mapping of an Al2O3/ZrO2 Eutectic Composite

We constructed a scanning near-field optical microscope (SNOM) on a commercially available atomic force microscopy (AFM) apparatus (SPM-9500J2; Shimadzu Corp.) to measure the stress distribution in ceramic composite materials. Features of our SNOM system are: (1) a compact SNOM head substituted for the original AFM head; (2) a wide scanning range (125 × 125 μm²) inherited from the original scanner; (3) use of conventional shear-force regulation; (4) an optical system for the illumination-collection (I-C) mode; (5) excitation by a 488 nm line of an Ar-ion laser, and (6) light detection by photon counting or a polychromator equipped with an electronically cooled charge coupled device (CCD). This SNOM system was used to measure the surface structure and stress distribution of an Al₂O₃/ZrO₂ eutectic composite. We simultaneously measured topographic images and fluorescence spectra of an Al₂O₃/ZrO₂ eutectic composite. We estimated its peak intensity, peak position, and peak width from the fluorescence spectrum during scanning, which respectively correspond to the abundance of Al₂O₃, stress in the grain, and the anisotropy of that stress. Mapping images showed that the stress and its anisotropy were weaker in the center of the Al₂O₃ grain than its boundary between Al₂O₃ and ZrO₂. That observation suggests that Al₂O₃ underwent intense anisotropic stress induced by volume expansion in the phase transition of ZrO₂ from the cubic phase to the monoclinic phase during preparation.     

High resolution X-ray diffraction of GaN grown on Si (1 1 1) by MOVPE

High temperature GaN layers have been grown on Si (1 1 1) substrate by metalorganic vapor phase epitaxy (MOVPE). AlN was used as a buffer layer and studied as a function of thickness and growth temperature. The growth was monitored by in situ laser reflectometry. High resolution X-ray diffraction (HRXRD) revealed that optimized monocrystalline GaN was obtained for a 40 nm AlN grown at 1080 °C. This is in good agreement with the results of morphological study by scanning electron microscopy (SEM) and also confirmed by atomic force microscopy (AFM) observations. The best morphology of AlN with columnar structure and lower rms surface roughness is greatly advantageous to the coalescence of the GaN epilayer. Symmetric and asymmetric GaN reflections were combined for twist and stress measurements in monocrystalline GaN. It was found that mosaicity and biaxial tensile stress are still high in 1.7 μm GaN. Curvature radius measurement was also done and correlated to the cracks observations over the GaN surface.     

叶酸-O-羧甲基壳聚糖的制备与光谱分析

壳聚糖经羧甲基化制备出的O-羧甲基壳聚糖,采用离子交联法与叶酸复合制备出叶酸-O-羧甲基壳聚糖复合物。通过红外光谱、X射线衍射光谱、扫描电镜等测试手段进行表征,探讨了叶酸、O-羧甲基壳聚糖的质量比对复合物结构及性能的影响,利用断尾取血法探究复合物的凝血、止血性能。结果显示,叶酸-O-羧甲基壳聚糖凝血、止血效果显著。当叶酸与O-羧甲基壳聚糖的质量比为2∶5时,二者基团的作用力最强,复合物结构最稳定,凝血、止血效果最好。     

Source Characteristics of Aged Voice Assessed from Long-Term Average Spectra

This study is the first to investigate age-related changes in the source characteristics of dynamic speech using long-term average spectral analysis (LTAS). A total of 80 speakers divided equally by age and gender participated. All participants were healthy, active community members. From the first paragraph of the Rainbow Passage, spectral energy measurements were completed for all speakers at 50 frequency levels across the LTAS. In comparison with young women, elderly women demonstrated: (1) significantly higher spectral amplitude levels at the frequencies of 320, 6080, 6240, 6400, 6560, and 6720 Hz; (2) significantly lower levels at the frequencies of 3040 and 3200 Hz; and (3) a tendency toward higher levels at 160 Hz. These findings suggest that both young and elderly women demonstrate spectral features associated with breathy voice quality, while differing in the specific spectral regions in which breathiness is indicated. Elderly men demonstrated significantly higher spectral amplitude levels than young men at 160 Hz, as well as significantly lower levels at 1600 Hz. Findings for men provide acoustic support for previous laryngoscopic findings of an age-related increase in the incidence of glottal gaps.     

晶体中离子质量差异与激活离子光谱线热加宽和热位移

证明了基质晶体离子的质量差异对其中的激活离子光谱线的热加宽和热位移有贡献，对于单声子吸收或发射机制产生的热加宽和热位移而言，其贡献可以用一个乘积因子D^2表示，对于喇曼散射机制引起的热加宽，其贡献可以用乘积因子D^4表示，文中分别给出两种离子组成的晶体和三种离子组成的晶体的D的表示式。     

原位光谱反射比测量系统设计

介绍了用光纤和双通道光谱仪测量光谱反射比的技术优势，并着重讨论了原位光谱及光谱反射比测量系统的主要技术。利用这套测量装置对真空室中试验样品氧化前后进行测量，得到了与计量院标定值一致的结果。     

光谱辐照度测量的数学模型及其方法研究

光谱辐照度是光谱辐射计量中最基本的参数，是研究各种辐射源及光电探测器特性的重要依据。为提高光谱辐照度的测量精度和量值溯源等问题，国防科工委光学计量一级站采用BB3200K高温黑体作为基准的辐射源，以新型辐射测温法为基础，通过一系列光辐射理论和几何原理推导出辐射温度与辐射光功率之间的关系；通过对光辐射功率的绝对测量，并结合低温辐射计，从而完成了光谱辐照度量值的精度测量。该理论奠基了以探测器为基础的新的光辐射量传体系。主要介绍了在光谱辐照度标准装置的项目中复现光谱辐照度所建立的数学模型及新的测试方法，给出了测量结果，并简要介绍了基于该理论的测量装置的组成及原理。     

遥感FTIR测定固体推进剂燃烧的红外光谱特性

应用高分辨率的Bruker EQUINOX55型遥感FTIR,对含有大量高氯酸铵和聚四氟乙烯的高红外活性的固体推进剂燃烧火焰的红外光谱特性进行了研究。设定遥感FTIR光谱仪的光谱分辨率为4 cm-1,连续实时地收集燃烧进行到0,9,18,27和36 s时火焰的红外发射光谱图。采用分子转振光谱测温法,实时测定了固体推进剂的燃烧温度,测得的温度分别为1 992.5,2 610.9,2 294.4,2 361.1和1 916.9 K,校正了仪器的响应函数,得到了固体推进剂燃烧火焰的绝对光谱能量分布图,以及在不同时刻燃烧产物HCl,HF,CO₂和CO的实时浓度。研究结果表明,遥感FTIR可以用于研究特种红外源的红外光谱特性,特别是用于军事上红外目标识辨和制导与反制导,以及研究和改进固体推进剂的配方,是一种很有潜力的技术。     

激光微区发射光谱分析法测定铝酸锶铕镝长余辉材料中的铕

激光微区发射光谱分析法结合CCD光学多道分析仪测定了SrAl2O4:Eu2 ,Dy3 长余辉材料中铕的含量,研究了该方法用于长余辉材料定量分析的准确性。实验中以Eu(Ⅱ)412.973nm为分析线,计算机拟合LogIf~Logc工作曲线,对Eu的分析结果表明:分析谱线相对强度RSD为4.3%,定量分析相对标准偏差RSD为7.4%,分析结果的平均值为2.13%;采用高温固相反应法制备SrAl2O4:Eu2 ,Dy3 长余辉材料,制备前后的Eu百分含量发生明显变化,高温合成后的长余辉材料中Eu百分含量明显增大。     

简单有效的运动汽车投影阴影分割算法

在实时的车型识别系统中,由于光照的影响,需要一种简单快速有效的方法将汽车车体与其阴影分割开。利用阴影的光谱属性,同时根据阴影的几何特征及阴影区域内的点和汽车的空间位置、形状等相关特点,提出一种基于小波变换多分辨率特性的阴影分割算法,该算法能有效地分割出阴影与目标之间的分界线。先利用阴影的光谱属性对阴影进行粗分割,然后利用小波变换的多尺度性对候选阴影点进行特征提取,从而获取最后的阴影分界线。该方法不需要事先确定光源的方向、车体的彩色信息和背景纹理信息,能有效地分割任何颜色、任何背景纹理下、任何光源方向下的运动汽车投影阴影。实验表明,该方法定位准确,处理速度快,抗噪能力强,为进一步的车型识别提供基础。