Regeneration of polycondensation of wholly aromatic poly(azomethine)s with 1,5‐ or 2,6‐substituted naphthalene moiety in main chain

Wholly aromatic poly(azomethine)s with 1,5‐ or 2,6‐substituted naphthalene moiety in the main chains were prepared in aprotic polar solvents or m‐cresol under various reaction conditions. In the polymerization of 1,5‐diaminonaphthalene with terephthalaldehyde, the polymer that synthesized in (HMPA/DMSO) at room temperature for 24 h by adding 5 wt % of calcium chloride and a very small amount of p‐toluenesulfonic acid showed the highest reduced viscosity in all of the polymers from 1,5‐diaminonaphthalene. The reduced viscosity of poly(azomethine)s synthesized from 2,6‐diaminonaphthalene with 2,6‐diformylnaphthalene in m‐cresol and with terephthalaldehyde in HMPA/DMSO were η_red = 0.35 and 0.36, respectively. The thermal analysis showed the poly(azomethine)s had high thermal stability and the glass‐transition temperatures of these polymers are about 250 °C. The X‐ray diffraction showed that they are partially crystalline. They could be polymerized again by second stage polycondensation in polyphosphoric acid. The reduced viscosities of the obtained polymers were about 2–5 times as high as that of the pristine polymers. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1064–1072, 2000     

一类具有阶段结构和分布时滞的种群-传染病模型

讨论了一类具有阶段结构和分布时滞的种群-传染病模型.在模型中,假设染病者没有生育能力.通过分析讨论,得到了地方病平衡点存在的阈值条件及平衡点稳定性和持续生存的充分条件.     

Study on transition process of vacuum arc under transverse magnetic field

The transverse magnetic field (TMF) drives the vacuum arc to move along the surface of the contacts to prevent the local overheating and melting of the contact surfaces. The arcing process has great influence on the breaking capacity of short‐circuit current. In this paper, the arcing process between three types of TMF contacts was investigated. The transition process of an arc from the ignition stage to the diffusion stage was discussed. The transition moment, transition gap distance, and transition current were obtained. It was found that the axial magnetic field component of TMF contacts affected the arc transition process.     

机电控制技术实验系统开发

为了充分利用原有机电控制技术试验台,满足机电控制技术课程实践教学的需要,并为先进控制系统研究提供实验平台,改造了原有的机电控制综合实验装置。该装置以电机为实验对象,增加实验对象加载装置,用VC++编写了控制界面,通过PC及PLC两级控制,完成电机特性测试、机电传动系统控制等实验内容。经使用表明,该套实验装置操作简单、开放性好、实战性强。通过本实验台,可提高学生动手能力,完成了工程实践能力的培养。     

闪长岩单轴加载过程中声发射和弹性波速度变化规律的研究

为研究闪长岩在单轴加载过程中的声发射和各向波速变化规律,在单轴阶段加载和循环阶段加载条件下,对闪长岩岩样破裂过程中的声发射累计数、不同应力水平不同方向的波速、切线模量、轴向应变速率进行了研究。实验结果表明:(1)随着应力水平的增高,声发射事件数不断增加,在高应力水平(约80%峰值强度)时,声发射累计数急剧增多,随后切线模量出现震荡变化。(2)在加载过程中,压密程度及裂纹扩展方向对波速产生了巨大的影响,导致不同方向波速在不同的应力水平呈现出不同的变化规律,由此可以推测破裂面位置和破裂模式。在较高应力水平下(约60%峰值强度),平行于加载方向的波速趋于稳定,而垂直于加载方向的波速则持续下降,故用垂直于加载方向传播的波速预测岩石的破坏更具可靠性。(3)随着应力的增加,应变速率有逐渐减小的趋势,但临近岩石破裂时无异常变化出现,说明利用变形观测难以预测此类岩石的破坏。以上研究表明,根据纵波波速、声发射累计数和切线模量的变化可以有效预测岩石的破坏。     

片岩损伤裂隙系统生成及裂隙率间接定量表征方法研究

在岩石试验机上对标准片岩试件进行轴向预压,使试件内部微裂隙自由扩展、连通,以模拟工程扰动形成的损伤裂隙系统．采用纵波波速间接定量表征片岩试件的损伤,从而得到含有一定损伤裂隙系统的标准片岩试件,用于研究经受一定损伤作用后岩石的物理、力学等特性．对预压后的试样进行冻融循环试验,并对不同冻融损伤状态下的试件进行超声波测试和单轴压缩。经非线性回归分析发现,纵波波速和单轴抗压强度之间相关性显著．研究方法和成果对于岩石损伤的定量表征和含一定损伤岩石试件的制备具有指导意义．     

MEASUREMENT OF LÜDERS BAND IN SMALL SIZE LOW CARBON STEEL SPECIMEN BY 3D DIGITAL IMAGE CORRELATION METHOD

吕德斯效应是多种金属和合金材料由于屈服阶段的不均匀变形而在材料表面产生条带状褶皱的现象,它会使冲压件表面质量降低. 为了防止它的出现,对吕德斯效应进行研究变得非常重要. 采用小视场(15mm×15 mm)下三维数字图像相关方法对小尺寸低碳钢试件在单轴拉伸载荷作用下的变形场进行测量,实际观测了小尺寸试件的吕德斯效应,结合理论模型解释了其形成机理,并分析了吕德斯带传播过程中应变及应变率的变化规律.实验研究表明,运用三维数字图像相关方法测量试件表面变形场,实现了对小尺寸低碳钢试件的吕德斯带演化过程以及颈缩、断裂等细观力学行为的观测,该方法是研究材料变形细观机理的一种有效测量手段.     

轴流式喷水推进器泵级内部流场的数值计算

采用数值计算的方法,研究了轴流喷水推进器泵级模型的内部三维紊流流场和性能。计算针对泵级的进口到喷水推进器的出口进行,包括进水区域、叶轮、导流壳区域的泵级整个流道。采用结构网格对计算区域进行剖分,应用NUMECA软件对控制方程进行求解。选用Spalart-Allmaras一方程紊流模型,使用时间推进法计算流场中的流动参数。并根据流场计算结果对泵级的流量-扬程特性和流量-效率特性进行了预测。计算与实验结果对比表明,二者取得了较好的一致,说明采用的计算方法具有较好的可信性及较高的计算精度。根据流场计算结果,对泵级的性能进行了分析。     

20K-40K温区大功率单级脉管制冷机研究

脉管制冷机没有低温下的运动部件,具有运行可靠、低振动、低磁噪声以及长寿命等显著优点,可望在空间技术、超导、低温电子等领域获得广泛应用.文中介绍自行研制的一台20K-40K温区大功率单级脉管制冷机.初步实验结果表明,该制冷机的最低制冷温度为15.4K,在20K、30K和40K的制冷量分别达到6.1W,21.3W和37.3W.该制冷机为进一步的超导应用奠定了良好基础.     

A novel electromagnetism‐assisted imprinting technology to replicate microstructures onto a large‐area curved surface using a flexible magnetic mold

Replication of microstructures from a mold onto a curved surface is difficult. The conformal contact between the mold and the substrate has to be ensured. The present study proposes an innovative mechanism, which employs an electromagnetic disk to provide magnetic force and a PDMS flexible mold with a layer compounded magnetic powder. This mechanism provides not only the gradual contact from center to edge to avoid air entrapment but also conformal contact between the mold and the substrate during the imprinting operation. A system based on this electromagnetic soft imprinting technology has been implemented, and imprinting to replicate microstructures from the mold onto a curved surface has been carried out. The results reveal that the PDMS magnetic mold and the electromagnetic disk‐controlled magnetic force can successfully perform the imprinting and accurately replicate the microstructures onto the large‐area, curved surface glass. The PDMS flexible magnetic mold incorporated with the magnetic disk can be employed to achieve the conformal contact between the mold and the substrate. In addition, due to the low surface free energy of the PDMS, the de‐molding without sticking can be easily accomplished. Copyright © 2008 John Wiley & Sons, Ltd.