罗布泊地区环境样品中的放射性检测

随着核能的开发应用,研究环境中铀、钍、钾等长寿命放射性核素的放射性水平,对保护公众安全和生态环境具有重要意义。采用中子活化分析方法,对罗布泊地区环境样品作了放射性检测。根据该样品的比活度以及该样品的元素丰度与中国大陆地壳元素丰度的比较,表明罗布泊地区的地质放射性无明显的放射性异常,并可以作为建筑材料使用,符合GB6566-2001标准。     

A Solid Ammonium Ion Selective Electrode

Abstract

A new ammonium ion selective electrode has been developed and found to be capable of measuring ammonium ion in the presence of other cations. The electrode's selectivity over other cations is reported as well as its response time to step changes in ammonium ion activity. In addition, blood serum samples have been analyzed for urea content by treatment with urease with no special sample pre-treatment required.     

Detection of DNA Hybridization via Fluorescence Intensity Variations of ZnSe-DNA Quantum Dot Biosensors

ZnSe quantum dots (QDs) that were capped with 11-mercaptoundecanoic acid (MUA) and conjugated to amino-modified ssDNA molecules exhibited variations in fluorescence emission intensity upon hybridization with complementary ssDNA in solution, a phenomenon that can be exploited for rapid detection of free ssDNA sequences. Conjugation of MUA-capped ZnSe QDs to amino-modified ssDNA molecules resulted in increased fluorescence emission intensity and stability at room temperature. Increasing the length of the ssDNA, that was conjugated to the QDs, resulted in increased fluorescence emission intensity up to a length of about 50 nucleotide bases, beyond which the peak emission intensity reached a plateau. Hybridization of QD-ssDNA conjugates with complementary ssDNA, either in free form or bound to QDs from the same population, resulted in additional fluorescence emission intensity amplification. A small red shift was observed when three-dimensional QD-dsDNA-QD structures were formed. The QD-ssDNA sensors with single ssDNA molecule per QD were developed and used for rapid quantitative detection of fully or partially complementary free ssDNA sequences in aqueous solution. Partial hybridization of the QD-ssDNA sensors with short ssDNA targets resulted in smaller QD emission intensity amplification, when compared to full hybridization. A QD-ssDNA sensor containing a sequence corresponding to the hemoglobin beta gene was used to detect and discriminate between free ssDNA targets consisting of a complementary ssDNA sequence and targets containing a single-base mutation that can cause sickle-cell anemia. Such QD-based biosensors can form the basis for rapid separation-free assays that can be used to detect target biomolecules in solution.     

Beyond labels: A review of the application of quantum dots as integrated components of assays, bioprobes, and biosensors utilizing optical transduction

A comprehensive review of the development of assays, bioprobes, and biosensors using quantum dots (QDs) as integrated components is presented. In contrast to a QD that is selectively introduced as a label, an integrated QD is one that is present in a system throughout a bioanalysis, and simultaneously has a role in transduction and as a scaffold for biorecognition. Through a diverse array of coatings and bioconjugation strategies, it is possible to use QDs as a scaffold for biorecognition events. The modulation of QD luminescence provides the opportunity for the transduction of these events via fluorescence resonance energy transfer (FRET), bioluminescence resonance energy transfer (BRET), charge transfer quenching, and electrochemiluminescence (ECL). An overview of the basic concepts and principles underlying the use of QDs with each of these transduction methods is provided, along with many examples of their application in biological sensing. The latter include: the detection of small molecules using enzyme-linked methods, or using aptamers as affinity probes; the detection of proteins via immunoassays or aptamers; nucleic acid hybridization assays; and assays for protease or nuclease activity. Strategies for multiplexed detection are highlighted among these examples. Although the majority of developments to date have been in vitro, QD-based methods for ex vivo biological sensing are emerging. Some special attention is given to the development of solid-phase assays, which offer certain advantages over their solution-phase counterparts.     

Specific surface of two hydrated cements differing in strength

Specific surface, S, of CSH-gel particles of disordered layered structure, was studied by water sorption/retention in two cement pastes differing in strength, i.e. C-33 (weaker) and C-43 (stronger), w/c=0.4. Hydration time in liquid phase was t _h=1 and 6 months, followed by hydration in water vapour either on increasing stepwise the relative humidity, RH=0.5→0.95→1.0 (WS) or on its lowering in an inverse order (WR). Specific surface was estimated from evaporable (sorbed) water content, EV (110°C), assuming a bi- and three-molecular sorbed water layer at RH=0.5 or 0.95, respectively (WS). On WR it was three- and three- to four-molecular (50 to 75%), respectively, causing a hysteresis of sorption isotherm. At RH=0.5 the S increased with cement strength from 146 m² g^-1 (C-33, 1 m) to 166 m² g^-1 (C-43, 1 m) and with hydration time to 163 (C-33, 6 m) and to 204 m² g^-1 (C-43, 6 m). At RH=1.0 (and 0.95), higher S-value were measured but these differences were smaller: S amounted to 190-200 m² g^-1 in C-33 (1 and 6 m) and 198-210 m² g-1 in C-43 (1 and 6 m). Thus no collapse occurred on air drying of paste C-43 (6 m). This revised version was published online in July 2006 with corrections to the Cover Date.     

High-precision adiabatic calorimetry and the specific heat of cyclopentane at low temperature

We describe a fully automated adiabatic calorimeter designed for high-precision covering the temperature range 15 to 300 K. Initial measurements were performed on synthetic sapphire (20 g). The statistical error of the apparatus estimated from the scattering of theC _p data of sapphire is about 0.1% and the average absolute error of specific heat between 100 and 300 K was 0.7% compared to values given in the literature. The heat capacity and the three phase transitions of cyclopentane (C₅H₁₀) which is recommended as a standard for the temperature calibration of scanning calorimeters have also been measured. The transition temperatures were determined to be (literature values in parentheses): 122.23 K (122.39 K) 138.35 K (138.07 K) and 178.59 K (179.69 K), with an experimental error of ±40 mK.     

Ion-specific hydration effects: Extending the Poisson-Boltzmann theory

In aqueous solutions, dissolved ions interact strongly with the surrounding water and surfaces, thereby modifying solution properties in an ion-specific manner. These ion-hydration interactions can be accounted for theoretically on a mean-field level by including phenomenological terms in the free energy that correspond to the most dominant ion-specific interactions. Minimizing this free energy leads to modified Poisson-Boltzmann equations with appropriate boundary conditions. Here, we review how this strategy has been used to predict some of the ways ion-specific effects can modify the forces acting within and between charged interfaces immersed in salt solutions.     

具有表面活性的功能化离子液体N-(三甲氧硅丙基)-N-甲基-2-吡咯烷酮盐酸盐的合成与表征

以N-甲基-2-吡咯烷酮和3-氯丙基三甲氧基硅烷单体为原料,利用SN2亲核取代反应合成具有一定表面活性的功能化离子液体N-(三甲氧硅丙基)-N-甲基-2-吡咯烷酮盐酸盐.通过元素分析、红外光谱和核磁共振对功能化离子液体进行表征,并测定了其表面张力和导电率.结果表明,合成的产物结构与其理论结构基本一致,具有较宽的液体温度范围和较低的表面张力,并具有较高的电导率,随着温度的升高,电导率逐渐增高.     

Volumetric and viscosity studies of interactions between sodium phosphate salts and poly(propylene glycol) 400 in aqueous solutions at different temperatures

Density and sound velocity at the 288.15–313.15 K and viscosity at the 298.15–313.15 K temperature range at 5 K intervals for polypropylene glycol (PPG) in aqueous solutions of sodium di-hydrogen phosphate, di-sodium hydrogen phosphate and tri-sodium phosphate with salt mass fractions 0.00, 0.010 and 0.020 are reported at atmospheric pressure. From the experimental density and sound velocity data, the apparent specific volume, excess specific volume, isentropic compressibility and isentropic compressibility deviation values have been determined. The infinite dilution apparent specific volume and isentropic compressibility values of PPG have been obtained and from which the infinite dilution apparent specific volumes of transfer of PPG from water to aqueous sodium phosphate solutions have been obtained for the investigated salt concentrations and temperatures. The excess specific volume, isentropic compressibility and viscosity deviation are negative and decrease in magnitude as temperature, concentration of sodium phosphate and charge on the anion of electrolyte increases.