Determination of copper in medicinal plants used as dietary supplements by atomic absorption spectrometry with direct flame solid analysis

An alternative device for the direct solid analysis (DSA) for copper determination by flame atomic absorption spectrometry (FAAS) is proposed. Copper was directly determined in commercial medicinal plants used as dietary supplements. The determination of copper in solid samples by DSA–FAAS was made by using a conventional air–acetylene flame. Between 0.05 and 1.5 mg of each test, sample was weighed directly into a small polyethylene vial connected to the device used for solid introduction into the flame. Test samples were introduced into the flame as a dry aerosol using a T-quartz cell set between the burner and the optical path. The T-quartz cell has a slit in the superior part by which the solid aerosol passes to the flame. A transient signal, evaluated as integrated absorbance, is produced and it is totally integrated in 2 s. Background signals always presented absorbance values less than 0.1. It was found a characteristic mass of 0.8 ng Cu and absolute limit of detection of 1.2 ng (3 s), or 1.2 μg g⁻¹ if a sample mass of 1 mg was used. Optimized conditions for air flow rate, flame stoichiometry, and so on were established as well. No excessive grinding of the samples was needed and samples with particle of size less than 80 μm were used throughout. No statistical difference between the results from the proposed system and those obtained by sample digestion and determination by conventional FAAS was observed. With the proposed procedure, more than 50 test samples can be analyzed in 1 h and it can be easily adapted to conventional spectrometers for FAAS.     

Progress on the application of electrochemiluminescence biosensor based on nanomaterials

In this review, we check out the number of published literature in the field of ECL biosensors trends during nearly a decade, and compare the research status of four different types of biosensors; summarize the application forms of nanomaterials in ECL biosensor. We have an overview of the building patterns and application example of the four main types of biosensors in the paper.     

Validation of an analytical method to determine trace metal impurities in fluoride compounds by flame atomic absorption spectroscopy

 The development of an analytical method for the determination of some heavy metals (Fe, Cu, Co, Zn and Ni) in fluoride compounds [Cu(BF₄)₂, Sn(BF₄)₂, Pb(BF₄)₂ and HBF₄] by flame atomic absorption spectroscopy is described. This method is to be used as a routine analytical method in an industrial quality control laboratory. To this end the "performance characteristics" of an instrumental analytical method such as matrix effects, sensitivity, linearity, detection and quantitation limits, precision and accuracy were evaluated for every system under study. The results of these investigations showed that non-spectral interferences (due to the presence of large concentrations of major metals such as Cu, Sn and Pb) were observed. Nevertheless it was possible to define a matrix concentration interval where matrix effects were not statistically significant, and therefore a direct calibration approach could be used as the calibration tool whenever the major metal concentration was not higher than 40×10^–3 kg l^–1. A guide to the developement of an analytical method for trace metal determination is provided. General tools for quality control have been used in order to show how an analytical method can be tested daily and evaluated in a convenient manner. Received: 29 January 1997 Accepted: 11 March 1997     

Rapid and sensitive spectrofluorimetric determination of trace amounts of Hg(II) with o-vanillin-8-aminoquinoline

The fluorimetric determination of mercury ions with o-vanillin-8-aminoquinoline (OVAQ) in aqueous solutions was investigated. Hg(II) could react with the fluorescent reagent OVAQ (λ_ex/em = 278/314 nm) to form a nonfluorescent complex in an ethanol-water medium of pH 6.00. The linear range of the proposed method was from 2.5 to 80 μg/L, and the detection limit was 0.80 μg/L. The interferences of 24 foreign ions were also studied. The method was successfully applied to the determination of Hg(II) in sludge. The text was submitted by the authors in English.     

Tetrachloroferrate(III)-selective liquid membrane electrode based on crystal violet

An extract of crystal violet-tetrachloroferrate(III) in nitrobenzene was used to prepare a tetrachloroferrate(III)-selective liquid membrane electrode with a poly(vinyl chloride) support. The optimal conditions to determine 2.5 × 10^–5 – 5.0 × 10^–2 M iron(III) as tetrachloroferrate(III) (anionic slope 56 mV/decade, detection limit 7.9 × 10^–6 M) were found to be 4.0–5.5.M total chloride in 0.75–1.5M hydrochloric acid. The electrode was reliably applied to determine iron in human blood, haematite and mineralized vitamin syrup by direct potentiometry, standard and sample additions as well as standard subtraction techniques.     

Simultaneous Spectrophotometric Determination of Group B Vitamins Using Parallel Factor Analysis: PARAFAC

In this work, a simple and rapid analytical procedure was applied for simultaneous determination of folic acid (vitamin B₀), thiamin (vitamin B₁), riboflavin (vitamin B₂) and pyridoxal (vitamin B₆) based on the absorbance data in the pH range 2.0‐12.0 at 25 °C using parallel factor analysis (PARAFAC). The effect of the pH as the most important factor on the sensitivity of the determination was studied. The spectral data were recorded in 400‐650 nm intervals and a 2‐12 pH range for all four vitamins. The calibration set was constructed in the concentration ranges of 4‐22, 1‐20, 6‐26, and 4‐20 μg mL^?;1 for B₆,B₂,B₁ and B₀, respectively. The root mean squares errors of prediction for the prediction set, (RMSEP), are 0.65, 0.63, 1.13 and 0.34 for B₀,B₁,B₂ and B₆, respectively. The recovery percent for the validation set are in the range of 90.6 to 107.0%. The effect of the experimental conditions and diverse species were discussed. The optimum values of these factors were searched according to the relative standard deviation of the prediction set of mixtures solutions.     

流动注射光度法同时测定铜基合金中的铝和铁

提出了同时测定铜基合金中铝和铁的流动注射分析法。以０．０４ｍｏｌ／ＬＨＣｌ作载液，铬天青Ｓ为显色剂，通过测定６２８ｎｍ处铝、铁两配合物的吸光度之和及铝配合物的吸光度，实现了两组分的同时测定。在优化的实验条件下，检测限：Ａｌ和Ｆｅ分别为１．６９×１０－３和１．７３×１０－３ｍｇ／Ｌ，Ａｌ浓度在０～０．８ｍｇ／Ｌ；Ｆｅ浓度在０～１．０ｍｇ／Ｌ时服从比耳定律。进样频率为６０样／ｈ，所拟方法用于实际样品分析，获得满意结果。     

O. Carboxyphenylhydrazoethylacetoacetate as an Analytical Reagent for the Determination of Cu(II) and Co(II) in Complex Materials

An extraction‐spectrophotometric method for the determination of trace amounts of copper and cobalt based on their extraction into n‐pentanol with 0. carboxyphenylhydrazoethylacetoacetate (O.CPHEAA) was per formed. Copper was extracted from pH 6.0 – 8.0 and ionic strength 0.5 M – KCl. The maximum absorption of the extracted Cu(II) ‐ O.CPHEAA complex (1:1 & 1:2 species) occurs at 415 nm. The proposed method succeeded in as saying a concentration of 3–63 μg per 10 mL of n‐pentanol (? = 1.25 × 10⁴L mol^?1 cm^?1). The method failed to ex tract cobalt ion into various organic sol vents over a pH range of 2–11. The suggested method is highly selective and sensitive according to a wide scheme of interference studied. Copper in some plant samples was accurately estimated using the suggested method. The obtained results and the results of the AAS method were consistent. The reproducibility test shows a relative standard deviation of 1%. Sandell sensitivity for A = 0.001 is 5 × 10^?3 μg cm^?2.     

Selective Determination of Trace Mercury (II) after Preconcentration with 4-(2-Pyridylazo)-Resorcinol-Modified Nanometer-Sized SiO2 Particles from Sample Solutions

A rapid, selective method that utilize 4-(2-Pyridylazo)-resorcinol (PAR)-modified nanometer SiO₂ (nanometer SiO₂–PAR) as a new solid-phase extractant for preconcentration of trace mercury (II) has been developed. The adsorption property of nanometer SiO₂–PAR for metal ions was studied by selectively extracting different metal ions from aqueous solutions. The results revealed an excellent affinity of the nanometer SiO₂–PAR for mercury (II) in presence of interfering metal ions at pH 4. The main parameters of solid-phase extraction such as shaking time, elution and sample dilution effect were studied. The extractant shows rapid kinetic sorption, and the adsorption equilibrium of mercury (II) on nanometer SiO₂–PAR was achieved in less than 2 min. The adsorbed mercury (II) was easily eluted by 4 mL of 6 mol L⁻¹ HCl. The maximum preconcentration factor was 50. The maximum static adsorption capacity was 276 μmol g⁻¹ at pH 4. The detection limit (3σ) was 0.43 μg L⁻¹ for cold vapor atomic absorption spectrometry (CVAAS), and the relative standard deviation of the eight replicate determinations was 2.4% for the determination of 2.0 μg of Hg(II) in 100 mL water sample. The method was applied to the determination of trace mercury (II) in sample solutions with satisfactory results.