Electrothermal atomic absorption spectrometric determination of cadmium in environmental samples with niobium wire preconcentration method

A preconcentration method by adsorption of cadmium on a niobium wire was developed for the environmental waters, followed by electrothermal atomic absorption spectrometry with a tungsten tube atomizer. After the preconcentration, the niobium wire was directly inserted into the tungsten tube atomizer. In the preconcentration (adsorption) process of cadmium, the optimal immersing time was 60?s. The effects of large amounts of concomitants on the preconcentration of cadmium were evaluated. When 10³–10⁴ fold excess of matrix elements existed in aqueous solution at pH 4 and 9, the cadmium response was profoundly affected by the matrix elements. However, the cadmium absorption signal was not significantly influenced at pH 7. Therefore, pH 7 was selected for the application into the real environmental samples. Under the optimal conditions, the detection limit (3S/N) for cadmium by the niobium wire preconcentration method was 7.0?pg?mL^?1 and the relative standard deviation was 6.8%. The method with preconcentration on a niobium wire was applied to the determination of cadmium in water and proved to be sensitive, simple and convenient. Because this preconcentration method can be utilized in the in situ treatment of trace cadmium in environmental water samples, it was unnecessary to carry the water samples to the analytical work place. The technique was shown to be useful for the determination of cadmium in environmental water samples at 0.1–1?µg?L^?1 levels.     

Graphene oxide reinforced polyamide nanocomposite coated on paper as a novel layered sorbent for microextraction by packed sorbent

ABSTRACT

In this work, a novel layered sorbent for microextraction by packed sorbent (MEPS) was introduced, which has been prepared by coating graphene oxide/polyamide (GO/PA) nanocomposite (NC) onto cellulose paper through solvent exchange method. Scanning electron microscopy (SEM) was applied to investigate the surface characteristic and morphology of PA and GO/PA NC coated on cellulose paper. The prepared MEPS device was used for extraction of organophosphorous pesticides (OPPs) including chlorpyrifos, fenthion, fenithrothion, ethion, edifenphos and phosalone in environmental aqueous samples followed by detection using gas chromatography-flame ionisation detector (GC-FID). Important parameters affecting the MEPS method including pH of sample solution, extraction draw-discard cycles, sorbent layers, desorption solvent volume and desorption draw-eject number were studied and optimised using central composite design (CCD). Based on the method validation, limits of detection (LODs) were in the range of 0.2–1 µg L^?1. The calibration graphs for chlorpyrifos, fenthion and edifenphos are linear in the concentration range of 1 to 500 µg L^?1; for ethion and phosalone are linear in the range of 1–1000 µg L^?1 and for fenithrothion is linear in the range of 3–1000 µg L^?1. The method precision (RSD %) with six replicates determinations was in the range of 3 to 9.4 % and 3.9 to 11.9% for distilled water and spiked river water sample, respectively, at the concentration level of 300 µg L^?1 . The developed method was applied successfully to determine OPP compounds in river, dam and tap water samples; accordingly, the relative recoveries (RR%) were obtained in the range of 77.8 to 113.3%.     

Microextraction by packed sorbent liquid chromatography with time‐of‐flight mass spectrometry of triazines employing a molecularly imprinted polymer†

Molecularly imprinted polymers for the determination of triazines were synthesized by precipitation using atrazine as template, methacrylic acid as functional monomer, ethylene glycol dimethacrylate as crosslinker, and 2,2′‐azobisisobutrynitrile as initiator. The polymers were characterized by infrared spectroscopy and scanning electron microscopy and packed in a device for microextraction by packed sorbent aiming for the preconcentration/cleanup of herbicides, such as atrazine, simazine, simetryn, ametryn, and terbutryn in corn samples. Liquid chromatography coupled with time‐of‐flight mass spectrometry was used for the separation and determination of the herbicides. The selectivity coefficient of molecularly imprinted polymers was compared with that of nonimprinted polymer for the binary mixtures of atrazine/propanil and atrazine/picloram, and the values obtained were 15.6 and 2.96, respectively. The analytical curve ranged from 10 to 80 μg/kg (r = 0.989) and the limits of detection and quantification in the corn matrices were 3.3 and 10 μg/kg, respectively. Intra‐ and interday precisions were < 14.8% and accuracy was better than 90.9% for all herbicides. Polymer synthesis was successfully applied to the cleanup and preconcentration of triazines from fortified corn samples with 91.1–109.1% of recovery.     

High-temperature measurements of the rates of the reactions CH2O + Ar → Products and CH2O + O2 → Products

The two-channel thermal decomposition of formaldehyde [CH₂O], (1a) CH₂O + Ar → HCO + H + Ar, and (1b) CH₂O + Ar → H₂ + CO + Ar, was studied in shock tube experiments in the 2258-2687 K temperature range, at an average total pressure of 1.6 atm. OH radicals, generated on shock heating trioxane-O₂-Ar mixtures, were monitored behind the reflected shock front using narrow-linewidth laser absorption. 1,3,5 trioxane [C₃H₆O₃] was used as the CH₂O precursor in the current experiments. H-atoms formed upon CH₂O and HCO decomposition rapidly react with O₂ to produce OH via H + O₂ → O + OH. The recorded OH time-histories show dominant sensitivity to the formaldehyde decomposition pathways. The second-order reaction rate coefficients were inferred by matching measured and modeled OH profiles behind the reflected shock. Two-parameter fits for k_1a and k_1b, applicable in this temperature range, are:

     

紫外荧光硫分析仪用燃烧管的结构改进研究

对紫外荧光硫分析仪用石英燃烧管进行了结构改进,在原结构设计的基础上,增加了裂解氧预热管、挡板和氧气反吹口等。实验表明,相比于原结构设计的石英燃烧管进样量20μL和检出限0.2 mg/L,改进后的燃烧管进样量提高到了100μL,检出限达0.05 mg/L,线性范围为0.1～600 mg/L,相关系数大于0.999。采用改进后的燃烧管测定10.0 mg/L硫含量标准物质,其相对偏差为–1.5%～3.1%,测定结果的相对标准偏差为1.77%(n=10),两者均符合油品硫含量检测要求。改进后的燃烧管可替代市场上的其它国产石英燃烧管,进行油品中硫含量的测定。     

石墨相氮化碳材料在样品前处理中的研究进展

作为一种新型非金属材料,石墨相氮化碳以其独特的优点,如简单的制备方法、优良的化学及热稳定性、良好的生物兼容性和无毒性等,受到越来越多的关注。石墨相氮化碳及其复合材料目前已被广泛应用于电催化、光催化、生物成像等领域。由于具有大的比表面积,同时又是富电子的疏水材料,石墨相氮化碳相关材料被认为是一种理想的样品前处理吸附剂。该文探讨了近年来石墨相氮化碳及其复合材料作为固相萃取、分散固相萃取、磁性固相萃取、固相微萃取吸附剂在样品前处理中的应用,并对未来的发展趋势和应用前景进行了展望,以期为相关领域的研究提供帮助。     

An improved sealed quartz‐tube method for the determination of hydrogen isotopes in water

Hydrogen stable isotope analysis has been a valuable tool in the fields of geochemistry and ecological research as well as many other research fields. The methods are mainly divided into the dual‐inlet method (off‐line method) and continuous flow method. The dual‐inlet method is complicated and inefficient, but it is still important because of its high precision and wide application range. Although the continuous flow method improves the experimental efficiency, the memory effect is noticeable and the accuracy is reduced. An improved sealed quartz‐tube method is proposed in this paper. The sample is sealed in a capillary tube and placed in a quartz tube containing chromium powder. It is then packaged, evacuated, reacted at a high temperature, and analyzed for hydrogen isotope ratio. Excellent data accuracy, good reproducibility (<1‰), and no memory effect occurred in the method. The process is relatively simple, and the experimental efficiency is greatly improved, which provides an effective method for the analysis of hydrogen isotopes in complex liquid samples.     

火灾与撞击联合作用下钢管混凝土柱力学性能研究

为研究火灾高温与撞击联合作用下钢管混凝土柱的力学性能,基于ABAQUS建立了高温作用下考虑轴力影响的钢管混凝土柱侧向撞击有限元模型。首先,对高温与撞击联合作用下考虑轴力影响的钢管混凝土柱的破坏模式与受力全过程进行了分析,探讨了高温下钢管混凝土柱的抗撞性能与工作机理;其次,重点研究了受火时间、材料强度、含钢率以及撞击能量对抗撞性能的影响,并给出了相关设计建议。研究结果表明:高温与撞击联合作用下,钢管混凝土柱主要发生受弯破坏;受火15 min后,构件抗撞性能明显降低。轴压力对构件抗撞性能产生不利影响,轴压比从0增加到0.2,受火60 min构件抗撞性能下降了7.8%;混凝土强度对高温下钢管混凝土柱抗撞性能有显著影响,受火90 min后,混凝土强度由30 MPa增加到50 MPa,构件抗撞性能提高约85%;外钢管强度与含钢率对高温下抗撞性能影响不大。