Designing a contaminated soil sampling strategy for human health risk assessment

Human health risk assessment is a site-based approach used to identify the potential health hazards which are induced by an old site contamination. For a proper evaluation of the daily doses of contaminants to which people will be exposed given the future occupation of the site, both a characterization and a quantification of soil pollution are needed. Such information can be provided by soil sampling. Thus the choice of the location, the number, depth and type of soil samples is very important and ought to follow a well-defined strategy. A review of contaminated site sampling practices in Europe and North America could not identify any completely formalized sampling strategy for human health risk assessment. On the contrary there are several approaches which can be roughly classified into two categories: a systematic sampling scheme over the whole site, on the one hand, and a sampling design driven by an initial knowledge of the contamination sources and fitted to the suspected pollution pattern, on the other. The first approach provides a complete coverage of the site but it may be rather expensive and entail useless sampling. The performance of the second depends on the quality of prior information. Actually both methods can be combined as explained hereafter. In view of the specificity of each site, the requirements of health risk assessment and the time and cost constraints, it seems difficult to work out a typical soil sampling strategy suitable for all sites. However, some recommendations can be made according to the site dimensions, the nature, degree and heterogeneity of contamination, and the (future) use of the site. The scientist should thus rely on a thorough examination of all available information (site history, geology and hydrogeology, soil properties, contaminants behaviour , etc.) to delimit contaminated areas as homogeneous as possible and then distribute the sampling points (e.g.using a sampling grid). They should also take the potential exposure paths into account in order to define the areas and soil strata to be sampled as a priority. Statistical and geostatistical tools can be helpful for formulating a sampling strategy as well as for interpreting the collected data. Received: 7 December 2001 Accepted: 24 February 2002     

Interaction of Cu(+) and Cu(2+) ions with alpha-alanine. A density functional study

The Cu(+) and Cu(2+) preferred binding sites on alpha-alanine and their affinity values for this amino acid were determined at the density functional level using three different hybrid exchange correlation potentials and the 6-311++G** basis set. The results demonstrated that the two ions both give stable complexes with alpha-alanine but the stability order of the metalated species and the coordination sites are different depending on the nature of the cation. In particular, the Cu(+)-alpha-alanine ground-state structure is characterized by an eta(2)-N,O coordination with the nitrogen and oxygen atoms belonging to the amino and carbonyl groups, respectively. In contrast, the most stable complex of the Cu(2+)-alpha-alanine system has an eta(2)-O,O coordination with the cation bonded to the -CO(2) (-) moiety of the zwitterionic form of the amino acid. Comparison with the Cu(+) and Cu(2+) affinity values for glycine, computed at the same levels of theory, demonstrated that the relative values do not change significantly as different hybrid functionals are used, although the absolute affinities are strongly influenced by the choice of the hybrid potential.     

Dual Metal Active Sites in an Ir1/FeOx Single‐Atom Catalyst: A Redox Mechanism for the Water‐Gas Shift Reaction

Herein, we report a theoretical and experimental study of the water‐gas shift (WGS) reaction on Ir₁/FeO_x single‐atom catalysts. Water dissociates to OH* on the Ir₁ single atom and H* on the first‐neighbour O atom bonded with a Fe site. The adsorbed CO on Ir₁ reacts with another adjacent O atom to produce CO₂, yielding an oxygen vacancy (O_vac). Then, the formation of H₂ becomes feasible due to migration of H from adsorbed OH* toward Ir₁ and its subsequent reaction with another H*. The interaction of Ir₁ and the second‐neighbouring Fe species demonstrates a new WGS pathway featured by electron transfer at the active site from Fe³⁺?O???Ir²⁺?O_vac to Fe²⁺?O_vac???Ir³⁺?O with the involvement of O_vac. The redox mechanism for WGS reaction through a dual metal active site (DMAS) is different from the conventional associative mechanism with the formation of formate or carboxyl intermediates. The proposed new reaction mechanism is corroborated by the experimental results with Ir₁/FeO_x for sequential production of CO₂ and H₂.     

Optimization of Active Sites via Crystal Phase,Composition, and Morphology for Efficient Low-Iridium Oxygen Evolution Catalysts

Reducing the amount of iridium in oxygen evolution electrocatalysts without compromising their catalytic performances is one of the major requirements in proton-exchange-membrane water electrolyzers. Herein, with the help of theoretical studies, we show that anatase-type TiO₂-IrO₂ solid solutions possess more active iridium catalytic sites for the oxygen evolution reaction (OER) than IrO₂, the benchmark OER catalyst. Note that the same is not observed for their rutile-type counterparts. However, owing to their thermodynamic metastability, anatase-type TiO₂-IrO₂ solid solutions are generally hard to synthesize. Our theoretical studies demonstrate that such catalytically active anatase-type solid-solution phases can be created in situ on the surfaces of readily available SrTiO₃-SrIrO₃ solid solutions during electrocatalysis in acidic solution as the solution can etch away Sr atoms. We experimentally show this with porous SrTiO₃-SrIrO₃ solid-solution nanotubes synthesized by a facile synthetic route that contain 56 % less iridium than IrO₂ yet show an order of magnitude higher apparent catalytic activity for OER in acidic solution.     

Identifying the Types and Characterization of the Active Sites on M−X−C Single-Atom Catalysts

Single atom catalysts (SACs) have attracted much attention in recent years. As an essential group in SACs, M−X−C (X=nonmetallic element) materials have been demonstrated to be efficient in many reactions. However, identifying the active sites on M−X−C, especially under working conditions, is still challenging, which is crucial for chemists to further understand the mechanism underlying the reaction and better design proper SACs for specific reactions. Herein, the types and characterization of M−X−C are comprehensively summarized and discussed in this review. In addition to the basic information above, the challenges and opportunities remaining in this field will be also proposed to present a perspective to the research on the next step.     

加氢脱氮催化研究的新进展

化石燃料的加氢脱氮有利于改善油品质量及其稳定性,同时避免燃烧时NO_x的排放。本文介绍了不同化石燃料中有机氮化物的含量及类型,对不同加氢脱氮催化剂及其催化活性位的本质进行了探讨,同时论述了C—N键断裂机理及燃料中主要有机氮化物的HDN反应网络。着重概述了传统金属硫化物催化剂的改性方法,新型的金属碳化物、金属氮化物和金属磷化物催化剂的研究现状。     

Dual Metal Active Sites in an Ir1/FeOx Single-Atom Catalyst: A Redox Mechanism for the Water-Gas Shift Reaction

Herein, we report a theoretical and experimental study of the water-gas shift (WGS) reaction on Ir₁/FeO_x single-atom catalysts. Water dissociates to OH* on the Ir₁ single atom and H* on the first-neighbour O atom bonded with a Fe site. The adsorbed CO on Ir₁ reacts with another adjacent O atom to produce CO₂, yielding an oxygen vacancy (O_vac). Then, the formation of H₂ becomes feasible due to migration of H from adsorbed OH* toward Ir₁ and its subsequent reaction with another H*. The interaction of Ir₁ and the second-neighbouring Fe species demonstrates a new WGS pathway featured by electron transfer at the active site from Fe³⁺−O⋅⋅⋅Ir²⁺−O_vac to Fe²⁺−O_vac⋅⋅⋅Ir³⁺−O with the involvement of O_vac. The redox mechanism for WGS reaction through a dual metal active site (DMAS) is different from the conventional associative mechanism with the formation of formate or carboxyl intermediates. The proposed new reaction mechanism is corroborated by the experimental results with Ir₁/FeO_x for sequential production of CO₂ and H₂.     

Effects of acid etching on the structure of PtNi catalyst and total exposed active sites

The integration technology of hydrogen preparation–hydrogen storage not only can utilize hydrogen energy efficiently but also can improve the selectivity of the electrode maximally. In the present work, the structure and composition of the PtNi catalyst was characterized by X-ray diffraction (XRD); and its electrochemical properties, morphology, and surface binding energy were analyzed by cyclic voltammetry (CV) and linear scanning voltammetry (LSV), scanning electron microscopy equipped with energy-dispersive spectrometry (SEM-EDS), and X-ray photoelectron spectroscopy (XPS), respectively. The effects of different acid etching treatments (e.g., etching time, etchant concentration, and etching temperature) on the structure and surface active sites were investigated by the orthogonal experiment. The experimental results reveal that after etching with 0.5 mol/L of perchloric acid for 0.5 h at 60°C, the electrode weight loss of the PtNi catalyst is mainly attributed to the large loss of Ni atoms in film layer. This results in the reduced alloy phase in film layer and the appearance of Pt characteristic diffraction peak. The relative content of Pt on the surface of the film electrode increases significantly, and the total number of active sites also increases correspondingly. The binding energy of Pt4f_7/2 decreases by 0.19 eV, and the number of active sites involved in hydrogen release decreases, indicative of the reduced promotion effect of the PtNi catalyst on hydrogen release.     

基于氮掺杂碳载铁复合物的锌空电池氧阴极催化剂

迫在眉睫的环境和能源问题推动人类探索可行、可靠和可再生的能源技术.锌-空气电池和氢氧燃料电池等器件显示出高能量转换效率,但是仍有许多难题有待克服,例如阴极侧上缓慢的氧还原反应(ORR),以及高昂的成本极大地限制了铂基催化剂在商业上的广泛应用.因此,开发高性能的廉价ORR催化剂具有重要意义.过渡金属碳氮化合物(M-N-C, M=Co, Fe等)成为最有希望替代铂基催化剂的一类材料, M-N-C催化剂可以通过直接热解含有过渡金属、氮和碳物种的前驱体合成.然而热解时金属原子易团聚,多孔结构不能被有效地控制,导致相对较差的催化活性.目前, MOF衍生的催化剂在能源转化和储存技术中得到了广泛的关注,其具有丰富的氮含量、高比表面积和可调的孔道结构等特点.本文报道了一种简便可靠可控的合成铁氮共掺杂碳十二面体纳米结构催化剂的方法,并作为阴极电催化剂用于锌空气电池中,测试结果证实,合成的铁氮共掺杂的纳米碳具有与铂基材料相当的活性和更加优异的稳定性.表面吸附了的邻菲罗啉铁的ZIF-8在碳化过程中,氮基团能够结合铁形成Fe Nx结构单元,因此可得到铁氮共掺杂的电催化剂.粉末X射线衍射,扫描电镜证实ZIF-8的成功合成.经过热解得到的催化剂中Fe Nx或Fe Cx衍射峰较弱,表明样品中铁含量较低,存在部分无定型铁.通过拉曼光谱分析发现,引入的邻菲罗啉在热解过程中诱导了缺陷的形成,所以Fe-NCDNA-0的ID/IG比值明显高于NC.同时ID/IG随着铁含量的增加而减少,这是因为铁可以诱导石墨化,诱导效应随着铁含量的增加而增加.分析氮气吸附-脱附等温线得出,引入邻菲罗啉之后,比表面积增加;而铁的引入因其占据了微孔结构,导致比表面积下降.同时电镜证实Fe-NCDNA-2具有较大的形貌扭曲,使得该材料具有较大的比表面积.系统的电化学研究表明,氮掺杂有利于增强ORR活性,在引入铁之后形成高效的活性中心会进一步提高催化性能.因此, Fe-NCDNA-2在碱性条件下表现出优异的ORR性能.线性扫描伏安法曲线表明,铁氮共掺杂的材料表现出与Pt/C相似的性能,其中Fe-NCDNA-2的半波电位(E1/2)为0.863 V,比商业Pt/C的电位更正(E1/2=0.841 V).同时, Fe-NCDNA-2具有更加优异的稳定性,测试30000 s后的电流保持率为80%(Pt/C:64%).在中性介质中,合成的材料也展示了较高的ORR活性.Fe-NCDNA-2的E1/2=0.715 V,催化30000 s后电流保持率77%,均优于商业Pt/C催化剂.组装的锌空气电池进一步验证其作为氧还原催化剂实际应用的可行性.相比于以Pt/C为催化剂做空气阴极的电池,以Fe-NCDNA-2组装的电池表现出更高的开路电压,更高的功率密度(184 m Wcm^-2),以及更加优异的充放电循环稳定性.该工作也有利于启发研究人员探索类似的氮掺杂过渡金属碳材料在各种催化上的应用.