Grid‐free surface vorticity method applied to flow induced vibration of flexible cylinders

In order to study cross flow induced vibration of heat exchanger tube bundles, a new fluid–structure interaction model based on surface vorticity method is proposed. With this model, the vibration of a flexible cylinder is simulated at Re=2.67 × 10⁴, the computational results of the cylinder response, the fluid force, the vibration frequency, and the vorticity map are presented. The numerical results reproduce the amplitude‐limiting and non‐linear (lock‐in) characteristics of flow‐induced vibration. The maximum vibration amplitude as well as its corresponding lock‐in frequency is in good agreement with experimental results. The amplitude of vibration can be as high as 0.88D for the case investigated. As vibration amplitude increases, the amplitude of the lift force also increases. With enhancement of vibration amplitude, the vortex pattern in the near wake changes significantly. This fluid–structure interaction model is further applied to simulate flow‐induced vibration of two tandem cylinders and two side‐by‐side cylinders at similar Reynolds number. Promising and reasonable results and predictions are obtained. It is hopeful that with this relatively simple and computer time saving method, flow induced vibration of a large number of flexible tube bundles can be successfully simulated. Copyright © 2004 John Wiley & Sons, Ltd.     

Electronic and Magnetic Properties of the p-NPNN

In this paper, we study the electronic band structure and the ferromagnetic properties of the organic radicalp-NPNN by employing density-functional theory with generalized gradient approximation (GGA) and local-spin densityapproximation (LSDA). The density of states, the total energy, and the spin magnetic moment are calculated. Thecalculations reveal that the δ-phase of p-NPNN has a stable ferromagnetic ground state. It is found that an unpairedelectron in this compound is localized in a single occupied molecular orbital (SOMO) constituted primarily of π* (NO)orbitals, and the main contribution of the spin magnetic moment comes from the π* (NO) orbitals. By comparison, wefind that the GGA is more suitable to describe free radical systems than LSDA.     

Crystallographic report: Crystal structure of a one‐dimensional zinc(II) coordination polymer containing 4,4′‐biphenyldicarboxylate hemihydrate

A one‐dimensional zinc(II) coordination polymer has been constructed from zinc(II), 4,4′‐biphenyldicarboxylate and pyridine in which each zinc(II) atom is coordinated by two pyridine ligands and two monodentate 4,4′‐biphenyldicarboxylate ligands that define a distorted tetrahedral geometry. Copyright © 2003 John Wiley & Sons, Ltd.     

若干具有[(PO4)2Mo5O15]簇骼的化合物的光谱研究

本文对所合成的具有 [(PO4 ) 2 Mo5O1 5]簇骼的 3种新颖的有机 磷钼酸盐簇合物(NH3CH2 CH2 NH3) 2 5[(PO4 ) (HPO4 )Mo5O1 5]·7 5H2 O (Ⅰ ) ,(H3NCH2 CH2 NH3) 3·[(PO4 ) 2 Mo5O1 5]·3H2 O (Ⅱ )和(H3NCH2 CH2 NH3) 2 ·[Cu(en) ][(PO4 ) 2 Mo5O1 5]·5H2 O (Ⅲ )用FTIR ,NIR Raman ,紫外 可见漫反射光谱 (UV VisDRS)和荧光光谱等研究手段 ,对其进行光谱研究 ,探讨其结构和性能的关系。在这些化合物中 ,化合物Ⅰ和Ⅱ具有孤立的 [(PO4 ) 2 Mo5O1 5]簇骼基元 ,而化合物Ⅲ的 [(PO4 ) 2 Mo5O1 5]簇骼基元是由 [Cuen]基团桥联成链 ;磷钼酸盐的特征振动频率和这些化合物的结构相关 ;UV VisDRS显示 ,在 2 0 0和 2 6 0nm左右有两个杂多化合物的特征吸收谱带 ;化合物的稳态荧光光谱中 ,观察到以 2 4 0nm激发 ,在大约 4 0 0nm附近出现的由金属氧簇Oμ→Mo跃迁激发所引起的较强的发射峰 ,在化合物 (Ⅲ )中 ,还观察到通过 [Cuen]的荷移跃迁的以 5 70nm激发所产生的 6 0 4nm的发射峰。     

Development of measuring magnetic Compton profiles by grazing incidence geometry

A novel technique of measuring a magnetic Compton profile using the grazing angle geometry against a sample surface (Grazing Incidence Magnetic Compton Profile) has been successively developed. Measurements of a magnetic moment and a magnetic Compton profile are possible for a Fe 200 nm film on a thick glass substrate. The estimated thinnest limit for measurements is 100 nm for a Fe film.     

Crystallographic report: Crystal structure of 1‐bromo‐1′‐[(2S)‐N‐(1‐hydroxy‐3‐methylbutane‐2‐yl)]‐ferroceneamide

For the unsymmetrical title compound, 1‐bromo‐1′‐[(2S)‐N‐(1‐hydroxy‐3‐methylbutane‐2‐yl)]‐ferroceneamide, two independent molecules were found in the asymmetric unit. Copyright © 2003 John Wiley & Sons, Ltd.     

The Module Structure Theorem for Sobolev Spaces on Open Manifolds

We prove a general embedding theorem for Sobolev spaces on open manifolds of bounded geometry and infer from this the module structure theorem. Thereafter we apply this to weighted Sobolev spaces.     

Structural and electrical properties of crystalline (1−x)Ta2O5−xTiO2 thin films fabricated by metalorganic decomposition

Polycrystalline (1−x)Ta₂O₅−xTiO₂ thin films were formed on Si by metalorganic decomposition (MOD) and annealed at various temperatures. As-deposited films were in the amorphous state and were completely transformed to crystalline after annealing above 600 °C. During crystallization, a thin interfacial SiO₂ layer was formed at the (1−x)Ta₂O₅−xTiO₂/Si interface. Thin films with 0.92Ta₂O₅–0.08TiO₂ composition exhibited superior insulating properties. The measured dielectric constant and dissipation factor at 1 MHz were 9 and 0.015, respectively, for films annealed at 900 °C. The interface trap density was 2.5×10¹¹ cm⁻² eV⁻¹, and flatband voltage was −0.38 V. A charge storage density of 22.8 fC/μm² was obtained at an applied electric field of 3 MV/cm. The leakage current density was lower than 4×10⁻⁹ A/cm² up to an applied electric field of 6 MV/cm.     

Structure induced by irradiation of femtosecond laser pulse in dyed polymeric materials

We investigated the structures induced by an irradiation of a near‐infrared (NIR) femtosecond laser pulse in dye‐doped polymeric materials {poly(methyl methacrylate) (PMMA), thermoplastic epoxy resin (Epoxy), and a block copolymer of methyl methacrylate and ethyl acrylate‐butyl acrylate [p(MMA/EA‐BA) block copolymer]}. Dyes used were classified into two types—type 1 with absorption at 400 nm and type 2 with no absorption at 400 nm. The 400‐nm wavelength corresponds to the two‐photon absorption region by the irradiated NIR laser pulse at 800 nm. Type 1 dye‐doped PMMA and p(MMA/EA‐BA) block copolymer showed a peculiar dye additive effect for the structures induced by the line irradiation of a NIR femtosecond laser pulse. On the contrary, dye‐doped Epoxy did not exhibit a dye additive effect. The different results among PMMA, p(MMA/EA‐BA) block copolymer, and Epoxy matrix polymers are supposed to be related to the difference of electron‐acceptor properties. The mechanism of this type 1 dye‐additive‐effect phenomenon for PMMA and p(MMA/EA‐BA) block copolymer is discussed on the basis of two‐photon absorption of type 1 dye at 400 nm by the irradiation of a femtosecond laser pulse with 800 nm wavelength and the dissipation of the absorbed energy to the polymer matrix among various transition processes. Dyes with a low‐fluorescence quantum yield favored the formation of thicker grating structures. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 2800–2806, 2002     

Unique edge structure and stability of fabricated dimer islands on Si(001)

The edge structure and stability of monolayer-high islands fabricated on Si(001) surfaces by scanning tunneling microscopy have been analyzed theoretically. In contrast to the edges of similar islands grown by depositing Si, the properties of edges of fabricated islands are determined by the length of the trench of dimers that are removed to create the island. We demonstrate the possibility of controlling the edge structure, and thus the stability, through a selective process of atom removal.