X-射线荧光光谱法测定钛铁中的硅、锰、磷、铝

介绍用X-射线荧光光谱仪测定钛铁中Si、Mn、P、Al含量的方法,通过试验确定了合适的研磨时间、压力和保压时间,用压片法制样,建立了各元素的工作曲线,各元素的测定范围分别为Si3.00%～6.00%,Mn1.00%～3.00%,P0.030%～0.070%,Al5.00%～9.00%。通过强度测量得到测定Si、Mn、P、Al的相对标准偏差分别为0.074%、0.308%、0.383%、0.040%,精密度满足测试要求。将该方法测定结果与化学法比对,准确度满足国家标准方法分析误差的要求。     

Preparation of lucifer yellow fluorescent liposomes: A method for cells' membrane labeling

This report describes a method to conjugate lucifer yellow to the external surface of liposomes. The heterobifunctional cross-linking reagentN-succinimidyl 3-(2-pyridyldithio)propionate has been used to activate DMPE molecules. The DMPE-dithiopyridine product has been mixed with DMPC to prepare liposome vesicles. These have been reduced by DTT and finally reacted with lucifer yellow-iodoacetamide to produce the fluorescence-labeled vesicles. The quenching of their fluorescence intensity by Kl is consistent with fully exposed fluorophores. The decay of the fluorescence intensity of the lipid-bound lucifer yellow is biexponential (₁=7.9 ns; ₂=1.1 ns), with a relative yield of 0.16. When the fluorescent liposomes are mixed with cells, the lucifer yellow-DMPE derivative is transferred. Boar spermatozoa and peripheral human blood lymphocytes have been used as cellular models. The extent of incorporation is dependent on the incubation time and temperature. At 36°C, lucifer yellow fluorescence appears in the spermatozoa cells after 10 min of incubation and reaches its maximum at about 60 min. The fluorescent phospholipid derivative seems to incorporate specifically into membrane structures. The highest labeling ratio is observed with integer, scarcely motile, spermatozoa. A poorer labeling yield (15%) is found with lymphocytes. Interestingly, photobleaching due to epiillumination of the labeled cells is apparently negligible and cells are clearly visible after irradiation times ranging from several minutes to few hours.A preliminary account of this work was presented at the Quarto Simposio su Biotecnologie Biochimiche, Capri, 28–30 June 1992.     

Evaluation of recombinant green fluorescent protein, under various culture conditions and purification with HiTrap hydrophobic interaction chromatography resins

To determine the influence of various culture conditions, transformed cells of Escherichia coli expressing recombinant green fluorescent protein (GFPuv) were grown in nine cultures with four variable conditions (storage of inoculated broth at 4°C prior to incubation, agitation speed, isopropyl-β-d-thiogalactopyranoside [IPTG] concentration, and induction time). The pelleted cells were resuspended in extraction buffer and subjected to the three-phase partitioning (TPP) extraction method. To determine the most appropriate purification resin, protein extracts were eluted through one of four types of HiTrap hydrophobic interaction chromatography (HIC) columns prepacked with methyl, butyl, octyl, or phenyl resins and analyzed further on a 12% sodium dodecylsulfatepolyacrylamidegel. With Coomassie staining, a single band between 27 (standard GFPuv) and 29 kDa (molecular weight standard) was visualized for every HIC column sample. TPP extraction with HIC elution provided about 90% of the GFPuv recovered and eight-fold GFPuv enrichment related to the specific mass. Rotary speed and IPTG concentration showed, respectively, greater negative and positive influences on GFPuv expression at the beginning of the logarithmic phase for the set culture conditions (37°C, 24-h incubation).     

Applications of thermal analysis in some solid-state reactions

TG-DTG-DTA has been used to characterize various isomers of CoCl₂·2(CH₃C₆H₄NH₂). Thermal analysis is further used to analyse the binary mixtures of these isomers. DTA recorded after different elapsed times follows the progress of reaction between cobalt chloride and benzocaine where progressively small endotherms are associated with starting materials. The application of thermal analysis to following the solid-solid reactions between metal acetates and 8-hydroxyquinoline was highlighted. The stoichiometry of such reactions was confirmed from the decrease in intensity of an endotherm as one increases the stoichiometry.Thanks are due to Drs. Keshav Chander, K. Kaur, Rajinder Singh and G. S. Chopra for helpful discussions and experimental work.     

掺铬铝酸钇红色颜料的合成、结构和性能表征

研究了高温固相合成制备掺铬铝酸钇红色颜料的方法，着重考察了灼烧温度（1000-1400℃）、灼烧时间（1-2h）、主要原料配比（Al／Y：1：0．5—1：1．5，Cr2O3％：0．3％-5％）等实验条件对产物结构和色泽的影响。XRD等方法对样品进行的相态分析表明，主相为铝酸钇石榴石相；运用反射光谱对红色颜料的色泽进行了反射峰位和相关强度的表征。当Y2O3：Al2O3摩尔比为1：1，掺杂3％的Cr2O3作显色剂，在少量矿化剂存在时，在1300℃下灼烧1 h，得到了色坐标为x=0．577，Y=0．401的红色陶瓷颜料。     

一种基于形成杂多核络合物的荧光增敏效应的研究 Ⅲ.锰(Ⅱ)、钴(Ⅱ)的混合荧光增敏及其连续测定

本文研究了Mn~(2+)和Co~(2+)对7-(8-羟基-3,6-二磺基萘偶氮)-8-羟基喹啉-5-磺酸-硼砂反应体系的混合荧光增敏作用。实验条件下,荧光增敏强度满足线性加和关系的范围是:Mn~(2+)浓度0～2.9×10~(-7)mol/L;Co~(2+)浓度0～8.8×10~(-7)mol/L;总浓度不超过1.0×10~(-6)mol/L。检出限量为Mn~(2+)4.5×10~(-9)mol/L和Co~(2+)1.4×10~(-8)mol/L。实现了Mn~(2+)和Co~(2+)的连续测定。     

Signaling molecularly imprinted polymers: molecular recognition-based sensing materials

Molecular imprinting is a template polymerization technique that can easily provide synthetic polymers capable of molecular recognition for given target molecules. In addition to their highly specific recognition ability, we are attempting to introduce signaling functions to molecularly imprinted polymers, enabling them to respond according to specific binding events. Some of our work regarding such signaling molecularly imprinted polymers is presented here, including molecularly imprinted polymers that induce spectral shifts of target compounds because of binding. Such compounds include hydrogen-bonding-based fluorescent imprinted polymers and metalloporphyrin-based signaling molecularly imprinted polymers.     

Purification of recombinant green fluorescent protein by three-phase partitioning

The technique of three-phase partitioning (TPP) was used to purify the green fluorescent protein (GFP) in a single step. TPP uses a combination of ammonium sulphate and tert-butanol to precipitate proteins from their crude extracts. In the first round of TPP with 20% ammonium sulphate saturation at the ratio of crude to tert-butanol 1:1 (v/v), most of the GFP remains in the lower aqueous phase. When subjected to a second round of TPP with 60% ammonium sulphate saturation at the ratio of crude to tert-butanol 1:2 (v/v) gives 78% recovery of GFP with a 20-fold purification. The sodium dodecyl sulphate-polyacrylamide gel electrophoretic (SDS-PAGE) analysis of purified preparation shows single band. The fluorescence excitation and emission spectra agreed with values reported in literature.     

Quantitative study on La~(3+) influx mediated by sodium-calcium exchanger in human lymphocytes

Whether La3+ can enter human peripheral blood lymphocytes by the Na+/Ca2+ exchanger or not and the effect of La3+on the Na+/Ca2+ exchanger activity are examined by fura-2 technique. And that whether La3+ is sequestered by intracellular organelles (mainly endoplasmic reticulum and mitochondria) is studied by this method. La3+uptake is obviously stimulated by pre-treating the cells with ouabain and by removing extracellular Na+, and intracellular La3+concentration ([La3+]i) is directly proportional to its extracellular concentration ([La3+]o). But when [La3+]o exceeds 0.4 mmol/L, the 340/380 nm ratio of fluorescence is no longer varied and the maximum [La3+], is 1.5×10-12 mol · L-1. The higher concentration of La3+ (0.1 mmol/L) increases Na+/Ca2+ exchange-mediated calcium influx, but lower concentration (10 μmol/L) appears to block calcium influx. The results also suggest that cytosolic La3+ is transported by the ATP-dependent Ca2+ pump. Intracellular Ca2+ stores are depleted by ionomycin, and then ion