原位成形光学微透镜的聚光性能研究

为解决荧光谱微检测系统中光学微透镜制作的困难,提出一种原位成形微透镜的制作方法,研究该微透镜的聚光性能,利用传统几何光学原理,分别推导出激发微透镜与检测微透镜的光线追迹方程,用该方程计算了2种微透镜的照射点分布几率,画出相应的分布曲线图,讨论了不同形状参数的微透镜对聚光性能的影响。研究结果表明,通过在光学胶中适当掺杂及打磨基底玻璃,可减小接触角,加大微透镜的形状参数,既能坚固透镜与基底间的粘接强度,又能提高微透镜的聚光本领。制作了使用原位成形光学微透镜的荧光谱微检测器,对生物荧光试剂进行了测试。实验结果表明,使用原位成形光学微透镜进行聚光,可使生物荧光谱强度提高4倍以上,通过在光学胶中掺杂以及打磨玻璃的办法,可以提高透镜的聚光本领约1.2倍。     

Double-quantum dipolar recoupling at high magic-angle spinning rates

A full investigation of the possible homonuclear double-quantum recoupling sequences, based on the RN family of sequences with N < or = 20, is given. Several new RN sequences, R16(6)(5), R18(8)(5), and R18(10)(5), were applied at high magic-angle spinning rates and compared with theory. The R18(10)(5) technique can be used to recouple dipolar couplings at spinning rates up to 39 kHz, and the application of the sequence in an INADEQUATE experiment is shown for a spinning rate of 30 kHz.     

Synthesizing Red Fluorescent Carbon Dots from Rigid Polycyclic Conjugated Molecules: Dual-Mode Sensing and Bioimaging in Biochemical Applications

Red fluorescent carbon dots (R-CDs) are special desirable for biochemical analysis due to good biological compatibility and deep penetration; however, they remain as bottlenecks due to difficulties in expanding the sp² domain, especially those are fused from rigid polycyclic conjugated molecules (RPCMs) with heteroatom substituents due to huge steric hindrance and heteroatom blockage toward graphic lattice. Here, an RPCM with heteroatom substituents, 1,5-diamino-4,8-dihydroxyanthraquinone (DDAQ), based self-doped R-CDs with PL emission at 635 nm is reported. Further investigations reveal that the expanding, hybrid sp² domain with indanthrone tannin structure from DDAQ is mainly responsible for the obtained red fluorescence of R-CDs. Taking advantage of optical properties, R-CDs are considered to construct a colorimetric/fluorescent dual mode sensing array for quantifying trace levels of Fe³⁺ and glyphosate based on the static quenching, and a biomarker for cell imaging. The CD-based sensors exhibit outstanding recovery, high selectivity, and sensitivity, also facilitated dual-mode detection with the naked-eye. The R-CDs have low cytotoxicity, good cell membrane penetration for rapid cell entry, and high resolution, demonstrating their potential for biolabeling and bioanalytic applications.     

Reflections on Ernest Roy Davidson: the UW years 1962–1984

In the following research acetylation as an unexplored factor in the anomeric effect in carbohydrate chemistry has been examined. Crystallographic data for methyl glycosides and their acetates have been compared and discussed. Some of the methyl glycosides form hydrogen bonding with the participation of acetal oxygen atoms. This seems to have the most significant influence on the structural diagnostic parameters for anomeric effect.

Abbreviations: Me-α-Glc: methyl α-D-glucopyranoside; Me-β-Glc: methyl β-D-glucopyranoside; Me-α-Gal: methyl α-D-galactopyranoside; Me-β-Gal: methyl β-D-galactopyranoside; Me-α-Man: methyl α-D-mannopyranoside; Me-β-Man: methyl β-D-mannopyranoside; Ac-Me-α-Glc: methyl 2,3,4,6-tetra-O-acetyl-α-D-glucopyranoside; Ac-Me-β-Glc: methyl 2,3,4,6-tetra-O-acetyl-β-D-glucopyranoside; Ac-Me-α-Gal: methyl 2,3,4,6-tetra-O-acetyl-α-D-galactopyranoside; Ac-Me-β-Gal: methyl 2,3,4,6-tetra-O-acetyl-β-D-galactopyranoside; Ac-Me-α-Man: methyl 2,3,4,6-tetra-O-acetyl-α-D-mannopyranoside; Ac-Me-β-Man: methyl 2,3,4,6-tetra-O-acetyl-β-D-mannopyranoside; GIPAW (Gauge Including Projector Augmented Waves) calculations: a DFT based method used for calculating nuclear magnetic resonance parameters; CP/MAS NMR: cross-polarisation (CP) magic angle spinning (MAS) NMR spectroscopy; δ_ss: chemical shift in ¹³C CP/MAS NMR spectrum; δ_t: theoretical chemical shift: as derived from GIPAW DFT; dis: distorted multiplet in ¹H NMR spectrum.     

Preconcentration and Separation of Gold(III) from Ore Samples by Solid-Phase Extraction Prior to Its Catalytic Fluorescent Determination

ABSTRACT

A new catalytic kinetic fluorescent quenching method for the determination of trace gold(III) was investigated. The method was based on the catalytic effect of gold on oxidation of 3-(3′-methylphenyl)-5- (2′-arsenoxylphenylazo) rhodanine by hydrogen peroxide in potassium hydrogen phthalate–hydrochloric acid (pH = 3.4). Under the optimum conditions, the great decrease of fluorescence intensity has a linear relationship against the concentration of gold in the range of 0 to 12.0 µg·L^?1 with a detection limit of 6.0 × 10^?10g·L^?1. The coexistent metal ions can be separated, and gold can be enriched by TBP resin of solid-phase extraction, which greatly improves the selectivity and sensitivity of the system. The method can be used to determine trace amounts of gold in ore samples successfully with satisfactory results.     

Long-range chemical interactions in solid-state reactions: effect of an inert Ag interlayer on the formation of L10-FePd in epitaxial Pd(0 0 1)/Ag(0 0 1)/Fe(0 0 1) and Fe(0 0 1)/Ag(0 0 1)/Pd(0 0 1) trilayers

The effect of 0, 0.5, and 1?μm-thick Ag interlayers on the chemical interaction between Pd and Fe in epitaxial Pd(0?0?1)/Ag(0?0?1)/Fe(0?0?1)/MgO(0?0?1) and Fe(0?0?1)/Ag(0?0?1)/Pd(0?0?1)/MgO(0?0?1) trilayers has been studied using X-ray diffraction, ⁵⁷Fe Mössbauer spectroscopy, X-ray photoelectron spectroscopy, and magnetic structural measurements. No mixing of Pd and Fe occurs via the chemically inert Ag layer at annealing temperatures up to 400?°C. As the annealing temperature is increased above 400?°C, a solid-state synthesis of an ordered L1₀-FePd phase begins in the Pd(0?0?1)/Ag(0?0?1)/Fe(0?0?1) and Fe(0?0?1)/Ag(0?0?1)/Pd(0?0?1) film trilayers regardless of the thickness of the buffer Ag layer. In all samples, annealing above 500?°C leads to the formation of a disordered Fe_xPd_1?x(0?0?1) phase; however, in samples lacking the Ag layer, the synthesis of Fe_xPd_1?x is preceded by the formation of an ordered L1₂-FePd₃ phase. An analysis of the X-ray photoelectron spectroscopy results shows that Pd is the dominant moving species in the reaction between Pd and Fe. According to the preliminary results, the 2.2?μm-thick Ag film does not prevent the synthesis of the L1₀-FePd phase and only slightly increases the phase’s initiation temperature. Data showing the ultra-fast transport of Pd atoms via thick inert Ag layers are interpreted as direct evidence of the long-range character of the chemical interaction between Pd and Fe. Thus, in the reaction state, Pd and Fe interact chemically even though the distance between them is about 10⁴ times greater than an ordinary chemical bond length.     

应用多核固体核磁共振光谱与量子化学计算的方法研究层状的过渡金属硫化物

层状的过渡金属硫化物及其衍生物在许多领域内有着广泛的应用前景. 具体应用包括催化、陶瓷、润滑、能量储存、半导体、电子与光学器件. 该文报道了作者最近用固体核磁共振光谱的方法来表征几种有代表性的过渡金属硫化物(MS₂: M=Zr, Ti, W, Mo和Ta)的结果. 并在不同的磁场强度下（21.1、14.1、9.4 T）成功地获取了³³S, ^47/49Ti,⁹¹Zr,⁹5Mo 在天然丰度下的固体核磁共振光谱. 为了帮助解释实验结果,同时还进行了量子化学计算. 实验及理论计算的结果都表明³³S, ^47/49Ti, ⁹¹Zr, ⁹⁵Mo 的固体核磁共振参数对于这些核的局部几何与电子环境非常敏感.     

通过超宽139La固体核磁共振波谱研究层状La(OH)2NO3

层状稀土氢氧化物是一类新型的稀土功能材料,本文采用固体核磁共振（SSNMR）方法研究了同时具备离子交换能力和非线性光学特性的层状La（OH）₂NO₃化合物,探讨了通过四极核CPMG（QCPMG）脉冲序列和变频谱图采集获取超宽¹³⁹La SSNMR谱图的方法,并描述了适用于此类实验的滤波方程和谱图重建方法.重建谱图同时包含四极核中心跃迁和卫星跃迁信息,本文使用QUEST软件对超宽¹³⁹La NMR谱图进行了模拟,获取的四极耦合常数C_Q和非对称因子η_Q均与CASTEP密度泛函理论计算值高度吻合.SSNMR实验结果证实层状La（OH）₂NO₃化合物属于非中心对称结构（P2₁）,解决了对其结构长期以来存在的争论.     

改变激发环境调控Ho3+离子的上转换发光特性

稀土掺杂上转换发光材料的发光特性不仅依赖于基质材料本身,而且与其激发条件密切相关.本文主要是以Ho^3+离子为研究对象,在NaYF4和LiYF4这两种不同的基质中,研究其在不同激发条件下的上转换发光特性.通过共聚焦显微光谱测试系统,对比Ho^3+离子在NaYF4和LiYF4微米晶体中的发光特性.实验结果发现:Ho^3+离子在这两种不同基质中均展现出较强的荧光发射.然而,当激发功率增加时,在单颗粒个LiYF4微米晶体中,当激发功率增加时,Ho^3+离子则发射出较强绿光及微弱的红光,红绿比变化并不明显,其蓝光发射强度也相对较弱.当激发这两种微米粉末晶体时,结果发现:Ho^3+离子均发射较强的绿光发射并伴有微弱红光发射,两种晶体中的发射特性极其相似.由此可见,在常规测试条件下,一些特殊发光现象是很难被观测到的.同时,通过对其光谱特性的分析,对Ho^3+离子的发光机理进行了研究.     

利用相位步进脉冲消除探头13C NMR背景信号

由静态探头线圈外有机材料产生的¹³C NMR背景信号强度大,化学位移范围广（δ_C 20~250）,此背景信号在交叉极化实验中还可被增强,并随着样品信号的累积而累积,严重影响谱图分析.将相位步进脉冲引入交叉极化实验（称为PIPCP）中可以有效去除经交叉极化增强的¹³C NMR背景信号,但样品信号不受影响.这是由于经过相位步进脉冲后,线圈外相位严重畸变,而且线圈外锁定场强度急剧降低,来自探头材料的¹³C NMR背景信号无法有效地进行交叉极化.而对于被测样品甘氨酸来说,由于I核和S核之间强烈的偶极耦合作用,所加相位步进脉冲对锁定场强度的影响只有1.4%.