Ultra‐wideline 27Al NMR Investigation of Three‐ and Five‐Coordinate Aluminum Environments

Ultra‐wideline ²⁷Al NMR experiments are conducted on coordination compounds with ²⁷Al nuclei possessing immense quadrupolar interactions that result from exceptionally nonspherical coordination environments. NMR spectra are acquired using a methodology involving frequency‐stepped, piecewise acquisition of NMR spectra with Hahn‐echo or quadrupolar Carr–Purcell Meiboom–Gill (QCPMG) pulse sequences, which is applicable to any half‐integer quadrupolar nucleus with extremely broad NMR powder patterns. Despite the large breadth of these central transition powder patterns, ranging from 250 to 700 kHz, the total experimental times are an order of magnitude less than previously reported experiments on analogous complexes with smaller quadrupolar interactions. The complexes examined feature three‐ or five‐coordinate aluminum sites: trismesitylaluminum (AlMes₃), tris(bis(trimethylsilyl)amino)aluminum (Al(NTMS₂)₃), bis[dimethyl tetrahydrofurfuryloxide aluminum] ([Me₂‐Al(μ‐OTHF)]₂), and bis[diethyl tetrahydrofurfuryloxide aluminum] ([Et₂‐Al(μ‐OTHF)]₂). We report some of the largest ²⁷Al quadrupolar coupling constants measured to date, with values of C_Q(²⁷Al) of 48.2(1), 36.3(1), 19.9(1), and 19.6(2) MHz for AlMes₃ , Al(NTMS₂)₃ , [Me₂‐Al(μ‐OTHF)]₂ , and [Et₂‐Al(μ‐OTHF)]₂ , respectively. X‐ray crystallographic data and theoretical (Hartree–Fock and DFT) calculations of ²⁷Al electric field gradient (EFG) tensors are utilized to examine the relationships between the quadrupolar interactions and molecular structure; in particular, the origin of the immense quadrupolar interaction in the three‐coordinate species is studied via analyses of molecular orbitals.     

Subsolidus phase relations and crystal structure of compounds in the PrOx-CaO-CuO system

The subsolidus phase relations of the PrO_x-CaO-CuO pseudo-ternary system sintered at 950-1000°C have been investigated by X-ray powder diffraction. In this system, there exist one compound Ca₁₀Pr₄Cu₂₄O₄₁, one Ca₂Pr₂Cu₅O₁₀-based solid solution, seven three-phase regions and two two-phase regions. The crystal structures of Ca₁₀Pr₄Cu₂₄O₄₁ and Ca₂Pr₂Cu₅O₁₀-based solid solution have been determined. Compound Ca₁₀Pr₄Cu₂₄O₄₁ crystallizes in an orthorhombic cell with space group D_2h²⁰−Cccm, Z=4. Its lattice parameters are a=11.278(2) Å, b=12.448(3) Å and c=27.486(8) Å. The crystal structure of Ca₂Pr₂Cu₅O₁₀-based solid solution is an incommensurate phase based on the orthorhombic NaCuO₂ type subcell. The lattice parameters of the subcell of the Ca_2.4Pr_1.6Cu₅O₁₀ are a₀=2.8246(7) Å, b₀=6.3693(5) Å, c₀=10.679(1) Å, and those of the orthorhombic superstructure are with a=5a₀, b=b₀, c=5c₀. The Ca_2.4Pr_1.6Cu₅O₁₀ structure can also be determined by using a monoclinic supercell with space group C_2h⁵−P2₁/c, Z=4, a=5a₀, b=b₀, and β=104.79(1)° or 136.60(1)°, V=5a₀b₀c₀.     

Theoretical studies on the smallest fullerene: from monomer to oligomers and solid States

Hybrid B3LYP and density-functional-based tight-binding (DFTB) computations on the solid-state structures and electronic properties of the C(20) fullerene monomer and oligomers are reported. C(20) cages with C(2), C(2h), C(i), D(3d), and D(2h) symmetries have similar energies and geometries. Release of the very high C(20) strain is, in theory, responsible for the ready oligomerization and the formation of different solid phases. Open [2+2] bonding is preferred both in the oligomers and in the infinite one-dimensional solids; the latter may exhibit metallic character. Two types of three-dimensional solids, the open [2+2] simple cubic and the body-centered cubic (bcc) forms, are proposed. The energy of the latter is lower due to the better oligomer bonding. The open [2+2] simple cubic solid should be a conductor, whereas the bcc solids are insulators. The most stable three-dimensional solid-state structure, an anisotropically compressed form of the bcc solid, has a HOMO-LUMO gap of approximately 2 eV and a larger binding energy than that of the proposed C(36) solid.     

Design of experimental routes and data processing for the determination of the depth-distribution of energy in real solids

No adequate thermodynamic definition of non-equilibrated solids is available at present. In this paper a method is suggested for the energetic characterization of solids by estimation of the distribution of the differential molar internal energies — as they appear during the breakdown of sample e.g. by chemical reaction, i.e. the ‘depth distribution of differential energies’ (DDE) of samples. Thermodynamic considerations are presented for approximating this quantity — and experimental possibilities proposed to attain the needed input information by thermoanalytical methods. Application of the suggested procedure is supposed to contribute to the better understanding of structure — energy — reactivity relations in real solids.     

Aging effect on the mechanical properties of hybrid gels

Sol-gel derived unsupported films and thin rods have been obtained from co-hydrolysis of triethoxysilane and methyldiethoxysilane. The materials are flexible, dense and transparent. Films and rods have been aged for different periods of time in air at room temperature. The elastic modulus has been measured by means of tensile or flexural tests. Measurements showed an increase of elastic modulus with aging time and showed different values for films and rods. The observed evolution of mechanical properties has been related to a corresponding structural modification as highlighted mainly by MAS-NMR studies. Analyses pointed out the crucial role of condensation processes and showed that the stiffness increase arises from the formation of relatively few bonds which link and constrain pre-existing mobile network regions.     

Nanocrystalline Ce1−xYxO2−x/2 (0≤x≤0.35) Oxides via Carbonate Precipitation: Synthesis and Characterization

A novel carbonate (co)precipitation method, employing nitrates as the starting salts and ammonium carbonate as the precipitant, has been used to synthesize nanocrystalline CeO₂ and Ce_1−xY_xO_2−x/2 (x≤0.35) solid-solutions. The resultant powders are characterized by elemental analysis, differential thermal analysis/thermogravimetry (DTA/TG), X-ray diffractometry (XRD), Brunauer-Emmett-Teller (BET) analysis, and high-resolution scanning electron microscopy (HRSEM). Due to the direct formation of carbonate solid-solutions during precipitation, Ce_1−xY_xO_2−x/2 solid-solution oxides are formed directly during calcination at a very low temperature of ∼300°C for 2 h. The thus-produced oxide nanopowders are essentially non-agglomerated, as revealed by BET in conjunction with XRD analysis. The solubility of YO_1.5 in CeO₂ is determined via XRD to be somewhere in the range from 27 to 35 mol%, from which a Y₂O₃-related type-C phase appears in the final product. Y³⁺-doping promotes the formation of spherical nanoparticles, retards thermal decomposition of the precursors, and suppresses significantly crystallite coarsening of the oxides during calcination. The activation energy for crystallite coarsening increases gradually from 68.7 kJ mol⁻¹ for pure CeO₂ to 138.6 kJ mol⁻¹ for CeO₂ doped with 35 mol% YO_1.5. The dopant effects on crystallite coarsening is elaborated from the view point of solid-state chemistry.     

Design of a combined ozone/electron beam process for waste water and economic feasibility of the process

A design of a combined ozone/electron beam irradiation process for treating a 50 m³/h waste water stream from a molasses processing is discussed. Moreover, a cost evaluation of such a process in comparison to a conventional ozonation/biology treatment process has been performed to assess the potential of the irradiation process for technical use. Although the result of this comparison is not bad for the irradiation process an implementation into a full scale plant would not seem to be the thing to do in the present case.     

Cathode of a fuel cell with a solid polymer electrolyte: Calculating overall currents in the presence of a gas-diffusion layer

Mathematical apparatus, which makes it possible to perform calculations of the current-voltage characteristics of cathodes of fuel cells with a solid polymer electrolyte in conditions where there are present extraneous diffusion restrictions is proposed. In so doing, the partial pressure of oxygen and the absolute pressure of gas in the gas chamber may assume any values. First of all presented are the results of calculations of the current-voltage characteristics intrinsic to active layers of the air and oxygen cathodes, which are performed under the assumption that the extraneous diffusion restrictions are absent altogether. Thereafter, in the same conditions (at the same parameters that characterize the active layer of a cathode), obtained are results of a calculation of the current-voltage characteristics inherent in the air and oxygen cathodes in the presence of extraneous diffusion restrictions. Afterward there is performed an analysis of the way a gas-diffusion layer restricts the process of generation of current in a cathode and of what measures should be taken in order for the extraneous diffusion restrictions to become less significant.     

Degradation-fragmentation of marine plastic waste and their environmental implications: A critical review

This review critically evaluates the plastic accumulation challenges and their environmental (primarily) and human (secondarily) impacts. It also emphasizes on their degradation and fragmentation phenomena under marine conditions. In addition, it takes into account the leachability of the various chemical substances (additives) embedded in plastic products to improve their polymeric properties and extend their life. Regardless of their effectiveness in enhancing the polymeric function of plastic products, these additives can potentially contaminate air, soil, food, and water. Several findings have shown that, regardless of their types and sizes, plastics can be degraded and/or fragmented under marine conditions. Therefore, the estimation of fragmentation and degradation rates via a reliable developed model is required to better understand the marine environmental status. The main parameter, which is responsible for initiating the fragmentation of plastics, is sunlight/UV radiation. Yet, UV- radiation alone is not enough to fragment some plastic polymer types under marine conditions, additional factors are needed such as mechanical abrasion. It should be also mentioned that most current studies on plastic degradation and fragmentation centered on the primary stages of degradation. Thus, further studies are needed to better understand these phenomena and to identify their fate and environmental effects.