Optimization of Mass Transfer Processes in the Zone of the Air Electrode of a Fuel Cell with a Solid Polymer Electrolyte

A two-dimensional mathematical model for the transport of reactants in a fuel cell with a solid polymer electrolyte is developed. The model is used for analyzing spatial distributions of the concentration of reactants and current density over the cell. The effect of the catalytic-layer activity, reactant speed, bipolar-plate geometry, thickness and porosity of current collector and/or gas-diffusion sublayer, and the reaction mixture composition on the fuel cell efficiency is estimated theoretically and experimentally.     

Solid Phase Synthesis of 2-Substituted 1,3-Oxazin-6-ones Using Resin-bound Cyclic Malonic Acid Ester

A facile solid phase synthesis of 2-substituted 1,3-oxazin-6-ones using polymer-supported Meldrum‘s acid has been reported. Reaction of the resin-bound cyclic malonic acid ester with triethyl orthoformate and subsequent double substitution with amide, afforded the corresponding polymer-supported acylaminomethylene cyclic malonic acid ester, which upon thermal treatment led to 1, 3-oxazin-6-ones in good yields and with high purity.     

The long‐time behaviour of the thermoconvective flow in a porous medium

For the Boussinesq approximation of the equations of coupled heat and fluid flow in a porous medium we show that the corresponding system of partial differential equations possesses a global attractor. We give lower and upper bounds of the Hausdorff dimension of the attractor depending on a physical parameter of the system, namely the Rayleigh number of the flow. Numerical experiments confirm the theoretical findings and raise new questions on the structure of the solutions of the system. Copyright © 2004 John Wiley & Sons, Ltd.     

花丝内插物强化竖直管内凝结换热的实验研究

1前言大空隙率多孔体管内插物-绕花丝内插物，被认为是强化管内凝结换热的最有效途径之一[1]．但以往的研究，由于实验雷诺数范围较小，蒸汽速度较低，要正确全面评价其性能尚显不够。本文在原有工作的基础上，进一步完善了实验系统，改进了测试手段，扩大了实验雷诺数范围，并测试了其阻力性能，对花丝内插物强化管内凝结换热进行了较深入全面的实验研究，以全面评价花丝内插物对管内凝结换热的强化效果。2实验系统本文实验系统如图1所示。实验段是一个竖直套管冷凝器，如图2所示．本试验研究蒸汽完全凝结时的传热。凝结水流量采用容积法计…     

Solid phase synthesis of azapeptides using an automatic synthesizer

Peptides containing azaglycine located terminally or within the backbone have been prepared in the solid phase by means of an automatic synthesizer.     

不良导体热系数和热体散热率测量方法研究(英文)

本文介绍一种直接测量散热率新方法．进而测出不良导体的热系数。该方法，减小了由间接测量散热率所带来的误差，实验装置简单，操作方便，参数少，测量结果的精确性和重复性都有较大提高，更重要的是这一新的实验方法突出了物理思想。     

Forced-air precooling of spherical foods in bulk: A parametric study

In this paper, a mathematical model for forced-air precooling of spherical food products in bulk is developed. The foods are arranged in horizontal layers stacked one above the other to form a rectangular parallelepiped with a vertical gap in between the product layers. The foods are cooled by chilled air blown along the height of the package. The governing equations for the conduction heat transfer in the foods, simultaneous heat and mass transfer at the food-air interface and in the air stream are solved numerically using finite-difference methods. A comprehensive numerical study is performed by varying the process parameters over a wide range. Typical results showing the variation of moist air properties along the height of the package and the effect of each parameter on the process time are presented. The ranges of parameters for advantageous operation of the precooling system are identified. Correlations are obtained for the process time based on the product center and mass-averaged temperatures in terms of process parameters.     

三维流动传热空隙率计算程序FASTOR—3D开发研究

1引言大粘度（大r）和大系数（ss和sc）法是处理流动区域中障碍物的常用方法山。但当流动区域中障碍物数量较多时，宜采用空隙率来模拟障碍物，如模拟反应堆流动传热的商用程序COMMIX［’］。我们根据空隙率模拟的基本概念，针对采用交错网格的压力校正法，自行编制了多障碍物流动传热三维计算的全部源程序代码，应用于某核反应堆钠池流动传热的数值模拟，获得了比较合理的结果。2数学模型和数值方法2．1控制方程空隙率修整的质量、动量、能量及湍流动能与耗散率的守恒方程通式的三维柱坐标形式为其中中一1，。，。，。，T，k，。分别表…     

四（对-羟基苯基）卟啉氧合配合物的室温固相合成，表征及氧合能力

采用固相反应合成了四羟基苯基卟啉与与Fe^2＋,Co^2＋金属离子的配合物,在室温下,将其与分子O2作用,提纯后得到两种固态氧合配合物．通过元素分析、红外光谱（IR）、核磁共振氢谱（^1HNMR）、电导、热分析（TG／DTA）、紫外光谱（UV）等测试手段确定了氧合配合物的组成为[Co·THPP·O2]（NO3）2·2H2O、[Fe·THPP·O2]Cl2·2H2O]，可知1mol配合物吸收了1molO2,采用失重法测定了氧合配合物中的配位氧,确定1mol金属配合物吸收1molO2形成超氧配合物．     

Continuous dependence on the geometry and on the initial time for a class of parabolic problems I

In this paper, we investigate the continuous dependence on the geometry and the initial time for solutions u( x , t) of a class of nonlinear parabolic initial‐boundary value problems. Copyright © 2007 John Wiley & Sons, Ltd.