气相-质谱法测定粮谷中恶草酮的残留量

 应用微量化学法和固相萃取技术 ,建立了粮谷中恶草酮残留量的气相 质谱 (GC MS)测定方法。用苯 正己烷 (体积比为 1∶1)萃取 ,中性氧化铝小柱净化。净化液用GC MS测定 ,采用外标法定量。恶草酮在大米中的回收率为 90 4%～ 115 .7% ,RSD为 2 %～ 6 % ,在玉米中的回收率为 81 3%～ 10 9 7% ,RSD为 4%～ 9% ,最低定量检出限为 0 0 0 5mg/kg。该法快速、灵敏、准确 ,各项技术指标均满足农药残留检测的要求。     

Liquid–solid disk extraction followed by supercritical fluid elution and gas chromatography of phenols from water

A method combining the techniques of liquid – solid disk extraction (LSDE) and supercritical fluid elution (SFE) has been developed for the phenols regulated by the Clean Water Act. LSDE uses a disk or membrane made of polytetrafluoroethylene (PTFE) fibrils impregnated with small particles, e.g. styrene divinylbenzene (SDB) resin, to extract phenols from water. After disk extraction the retained analytes are eluted from the disk using SFE. SFE is used as an alternative to liquid solvent elution with an organic solvent. Analytes are separated, identified, and quantified using gas chromatography – ion trap detector mass spectrometry (GC-ITDMS). The method is capable of sub parts per billion detection limits, and precision of 5–28% RSD. Evaluation of various disks or membranes, such as C₁₈-silica disks, SDB disks, and ion exchange membranes, has also been performed for the extraction of phenols from water. The results obtained from the in-situ aqueous acetylation of phenols and extraction of their acetates are quantitative. The utilization of LSDE and SFE techniques has proven to be a more effective approach than liquid – liquid extraction in minimizing air pollution and solvent waste.     

高效液相色谱-串联质谱法同时测定表层水体中5类40种抗生素

建立了固相萃取-高效液相色谱-串联质谱（SPE-HPLC-MS/MS）同时检测表层水中5类40种抗生素的分析方法。水样经过滤、固相萃取柱富集净化后，以乙腈-0.2%（v/v）甲酸水溶液为流动相进行梯度洗脱，采用电喷雾电离源，在多反应监测、正离子模式进行定性定量分析。结果显示，40种抗生素在1~200 μg/L水平下线性关系良好，平均加标回收率为41.3%~112.6%。采用该方法对长江南京段表层水体进行检测，共检出13种抗生素，含量为13.4~780.5 ng/L，其中喹诺酮类抗生素恩诺沙星检出率达100%，大环内酯类抗生素克林霉素最高检出水平达739.4 ng/L。该法高效、灵敏、可靠，可用于实际水样中多种抗生素的分析。     

The phase diagram of KNO3-KClO3

The binary phase diagram of KNO₃-KClO₃ is studied by means of differential scanning calorimetry (DSC) and high-temperature X-ray diffraction. The limited solid solutions, K(NO₃)_1−x(ClO₃)_x (0<x<0.20) and K(NO₃)_1−x(ClO₃)_x (0.90<x<1.0), were formed in the KNO₃-based solid solutions and KClO₃-based solid solutions phase, respectively. For KNO₃-based solid solutions, KNO₃ ferroelectric phase can be stable from 423 to 223 K as a result of substituting of NO₃ by ClO₃-radicals. The temperatures for solidus and liquidus have been determined based on limited solid solutions. Two models, Henrian solution and regular solution theory for KNO₃-based (α) phase and KClO₃-based (β) phase, respectively, are employed to reproduce solidus and liquidus of the phase diagram. The results are in good agreement with the DSC data. The thermodynamic properties for α and β solid solutions have been derived from an optimization procedure using the experimental data. The calculated phase diagram and optimized thermodynamic parameters are thermodynamically self-consistent.     

Pt／钇稳定氧化锆固体电解质在高温下的电化学性质

用交流阻抗技术研究了二电极、三电极Ｐｔ／钇稳定氧化锆（简称ＹＳＺ）高温固体电化学体系．开路电位下，Ｐｔ／ＹＳＺ体系只有一个阻抗半圆，对应于电极体系的电化学活化控制过程，极化电阻随温度变化的表观活化能为１７１．５ｋＪ／ｍｏｌ．Ｐｔ／ＹＳＺ界面的双电层电容约为３００μＦ／ｃｍ２．阳极极化下，交流阻抗极化电阻显著减小；阴极极化下，极化电阻反而增大，并出现浓差控制现象．     

Synthesis and thermal decomposition of lanthanide hexacyanochromate(iii) complexes,Ln[Cr(CN)6]·nH2O (Ln=La-Lu; n=3, 4)

New solid complex of nitrilotriacetic acid and bismuth trichloride was synthesized by a solid phase reaction of nitrilotriacetic acid and bismuth trichloride at room temperature. The composition of the sample is BiCl₃[N(CH₂COOH)₃]_2.5. The crystal structure of the complex belongs to triclinic system with the lattice parameters: α=0.7849 nm, β=0.9821 nm, χ=2.0021 nm, α=96.50°, β=98.76° and γ=90.49°. The far-infrared spectra show the bonding between the Bi ion and N atom of nitrilotriacetic acid. The thermal analysis also demonstrates the complex formation between the bismuth ion and nitrilotriacetic acid. The gaseous pyrolysis product and the final residue in the thermal decomposition process are determined to check the thermal decomposition reaction. This revised version was published online in August 2006 with corrections to the Cover Date.     

Carbon dioxide reduction under visible light: a comparison of cadmium sulfide and titania photocatalysts

1. Download : Download high-res image (135KB)
2. Download : Download full-size image

     

High-performance liquid chromatographic determination of Levetiracetam in human plasma: comparison of different sample clean-up procedures

An accurate and precise high-performance liquid chromatographic method using diode array detection for the determination of the novel antiepileptic, Levetiracetam, has been developed. Three clean-up procedures for the analysis of Levetiracetam in human plasma were implemented and evaluated, namely solid-phase extraction, deproteinization by addition of organic solvents and formation of insoluble salts. Adenosine was used as the internal standard for all three sample pretreatment procedures. Among the several cartridges used for solid-phase extraction, the hydrophilic-lypophilic balance (Oasis) HLB) phase provides the best extraction yield of Levetiracetam, together with high precision. With the two other clean-up procedures involving plasma deproteinization by addition of methanol or zinc sulphate, lower sensitivity and precision of the assays were obtained. However, they are cheaper and faster when compared with the solid-phase extraction procedure.     

Solid-phase synthesis of dihydrovirginiamycin S1, a streptogramin B antibiotic

We describe the first solid-phase synthesis of dihydrovirginiamycin S(1), a member of the streptogramin B family of antibiotics, which are nonribosomal-peptide natural products produced by Streptomyces. These compounds, along with the synergistic group A components, are "last line of defense" antimicrobial agents for the treatment of life-threatening infections such as vancomycin-resistant enterococci. The synthesis features an on-resin cyclization and is designed to allow production of streptogramin B analogues with diversification at positions 1', 1, 2, 3, 4, and 6. Several synthetic challenges known to hinder the synthesis of this class of compounds were solved, including sensitivity to acids and bases, and epimerization and rearrangements, through the judicious choice of deprotection conditions, coupling conditions, and synthetic strategy. This work should enable a better understanding of structure-activity relationships in the streptogramin B compounds, possible identification of analogues that bypass known resistance mechanisms, and perhaps the identification of analogues with novel biological activities.     

All-solid-state potentiometric sensors for ascorbic acid by using a screen-printed compatible solid contact

The development of all-solid-state potentiometric ion selective electrodes for monitoring of ascorbic acid, by using a screen-printed compatible solid contact is described. The applied methodology is based on the use of PVC membrane modified with some firstly-tested ionophores (triphenyltin(IV)chloride, triphenyltin(IV)hydroxide and palmitoyl-l-ascorbic acid) and a novel one synthesized in our laboratory (dibutyltin(IV) diascorbate). Synthesis protocol and some preliminary identification studies are given. A conductive graphite-based polymer thick film ink was used as an internal solid contact between the graphite electrode and the PVC membrane. The presence and the nature of the solid contact (plain or doped with lanthanum 2,6-dichlorophenolindophenol (DCPI)) seem to enhance the analytical performance of the electrodes in terms of sensitivity, dynamic range, and response time. The analytical performance of the constructed electrodes was evaluated with potentiometry, constant-current chronopotentiometry and electrochemical impedance spectroscopy (EIS). The interference effect of various compounds was also tested. The potential response of the optimized Ph₃SnCl-based electrode was linear against ascorbic acid concentration range 0.005-5.0 mM. The applicability of the proposed sensors in real samples was also tested. The detection limit was 0.002 mM ascorbic acid (50 mM phosphate, pH 5 in 50 mM KCl). The slope of the electrodes was super-Nernstian and pH dependent, indicating a mechanism involving a combination of charge transfer and ion exchange processes. Fabrication of screen-printed ascorbate ISEs has also been demonstrated.