Determination of urinary organic acids by HPLC

Summary A high-performance liquid chromatographic method for the simultaneous determination of urinary organic acids and creatinine for following the metabolism of aromatic solvents is reported. After extraction of acidified, filtered urine with diethylether followed by evaporation, the dried residue is dissolved in mobile phase. Hydroxybenzoic acid is used as internal standard. A column of Nucleosil C₁₈ is used with a precolumn of the same material. The mobile phase is acetonitrilephosphate buffer, pH 3.3 (1783). For determination of creatinine the sample is simply diluted 10-fold and the eluate monitored at 215 nm (UV). This technique gives highly reproducible results and is simple, reliable and useful for biological monitoring.     

Microporous hypercrosslinked polystyrene Styrosorb as a restricted access packing in sample clean-up for high performance liquid chromatography. Part I: Evaluation of restricted access properties

Summary Styrosorb is a beaded microporous polystyrene with particle sizes between 2 and 4 m. In spite of hypercrosslinkage the material was seen to swell in organic solvents. The native material is functionalized with Tris-groups at the outer surface of the particles. The average pore diameter was determined as 1.45±0.3 nm from size exclusion data using polystyrene and polyethylene standards in THF. The reversed phase behavior of the restricted access phase Styrosorb was investigated by injection of two test mixtures. Mixture I contained five aromatic amines, mixture II consisted of Amperozide^R and four related compounds. The optimum range of mobile phase composition was assessed so that analytes were separated whilst any proteins present were eluted unretained. Due to the small particle size short columns of 29×4 mm can be used for both sample clean-up and analytical separation of Amperozide^R and its metabolite.     

HPLC determination of pyroglutamic acid as a degradation product in parenteral amino acid formulations

Summary The aminoacid glutamine in aqueous solution and in conditions of high temperature and long term storage is partly transformed into pyroglutamic acid which exhibits potential neurotoxic effects.Commercially available aminoacid mixtures supplemented with glutamine are heat-sterilized and some losses of glutamine and formation of pyroglutamic acid may occur.The aim of the work was to set up an easy and reliable HPLC method which allows the determination of pyroglutamic acid as a degradation product of glutamine. The column was a 5 m Hypersil ODS (100×4.6 mm) and the mobile phase 100% 0.007 M phosphate buffer pH 3.5.Stability studies in different conditions of temperature and time of storage were performed on aminoacid mixture available in the commerce.     

Determination of fluoroquinolone antibacterials as N-acyl derivatives

Summary A simple and quantitative method for the preparation and high performance liquid chromatography (HPLC) of N-acylated fluoroquinolones has been developed. The acylation procedure was performed with four different acid anhydrides and found to be applicable to several fluoroquinolones. The acylated derivatives were chromatographed directly on a Nucleosil C₁₈ column without the necessity of further sample manipulation. Detector response for the N-acetyl derivatives of norfloxacin, ciprofloxacin, sarafloxacin, and temafloxacin was linear to at least 50 g/mL. The retention behavior of the N-acyl derivatives can be predicted by the length of the carbon chain of the amide.     

A micro-scale method employing surface plasmon resonance detection for the determination of conditions for immunoaffinity chromatography of proteins

Summary The BIAcore^TM Biosensor System utilizes a detection principle known as Surface Plasmon Resonance (SPR) which, in simple terms, detects changes in the refractive index of a solution in contact with a gold film. The gold film is surface modified with carboxymethylated dextran to produce a hydrophillic matrix onto which macromolecules may be covalently immobilized. In this respect, the BIAcore^TM is similar to any other insoluble matrix, such as a chromatographic support. The SPR detection principle, however, allows one to directly visualize the interaction under study, in real time and without the need for reporter molecules such as enzyme-labels. In addition, the very small sample requirements, automated robotics unit and ease of data analysis suggest the potential use of the BIAcore^TM instrumentation for assay development and possibly process development, especially where bio-specific interactions such as immunoaffinity chromatography are used as a step in the process. In this report, we demonstrate the use of the BIAcore^TM SPR detector for the micro-scale determination of conditions for immunoaffinity chromatography of soluble complementreceptor 1, sCR1.     

Stoichiometric ratio and doping effects on the thermal properties of sodium potassium sulphate crystals

The influence of stoichiometric ratio on the phase transition of sodium potassium sulphate (Na_xK_1–x)₂SO₄ crystals is investigated in the temperature range 300–500 K. The stoichiometric ratiox is chosen to bex=0.2, 0.3, 0.4, 0.8 and 0.9. The study has been carried out by using differential scanning calorimetry, DSC technique. The value of the specific heat,C _p, at the transition temperature,T _c , increases asx is increased up tox=0.4 and then decreases for higher values ofx. The change in the specific heat, C _p, is following a relation of the form C _p C _p (T–T _c /T _c )^– with = 0.12 which is in a fair agreement with the 3d Ising model. Insertion of Cu²⁺ ions into the lattice of (Na_xK_1–x)₂SO₄ crystals leads to a multiple peak in the temperature dependence ofC _p. The results are discussed from thermodynamical point of view.We would like to thank Prof. E. F. El-Wahidy, Prof. of Solid State Physics and Head of Physics Department, Faculty of Science, Alexandria University, for his interest and support of this work.     

Generalized Bethe ansatz solution of a one-dimensional asymmetric exclusion process on a ring with blockage

We present a model for a one-dimensional anisotropic exclusion process describing particles moving deterministically on a ring of lengthL with a single defect, across which they move with probability 0 p 1. This model is equivalent to a two-dimensional, six-vertex model in an extreme anisotropic limit with a defect line interpolating between open and periodic boundary conditions. We solve this model with a Bethe ansatz generalized to this kind of boundary condition. We discuss in detail the steady state and derive exact expressions for the currentj, the density profilen(x), and the two-point density correlation function. In the thermodynamic limitL the phase diagram shows three phases, a low-density phase, a coexistence phase, and a high-density phase related to the low-density phase by a particle-hole symmetry. In the low-density phase the density profile decays exponentially with the distance from the boundary to its bulk value on a length scale . On the phase transition line diverges and the currentj approaches its critical valuej _c = p as a power law,j _c – j ^–1/2. In the coexistence phase the width of the interface between the high-density region and the low-density region is proportional toL ^1/2 if the density f 1/2 and=0 independent ofL if = 1/2. The (connected) two-point correlation function turns out to be of a scaling form with a space-dependent amplitude n(x₁, x₂) =A(x₂)A ^Ke^–r/ withr = x ₂ –x ₁ and a critical exponent = 0.     

Synthetic strategies and functional reactivity of versatile thiophene synthons

Abstract

Thiophenes are a highly important group of heterocycles and have been of great interest to researchers due to their various reactivities. Many synthetic strategies are used to generate functionalized thiophene derivatives. Several reactions are described, depending on the reactivity of the substituents attached to the thiophene nucleus toward different nucleophiles to yield the versatile thiophene products. Many diverse applications have been utilized for thiophenes from medicinal chemistry to material science.     

A specific sensitive HPLC method for determination of plasma dopamine

Summary We describe here a sensitive, selective and rapid method to quantitate plasma catecholamines, especially dopamine, using high-performance liquid chromatography with electrochemical detection. This method requires a 10-minute run time and has a threshold for detection of 2 picograms, (10pg/ml).A number of commonly employed mobile phases for catecholamine analysis have been tested and have failed to detect dopamine in biological samples. Neither acetonitrile (3–7%) or methanol, (5–8%) in the mobile phase has produced consistently interpretable data either due to inability to detect or interference from co-eluting substances. Optimal detection was achieved with a mobile phase containing sodium acetate (6.8g), citric acid (5.9g), EDTA (48mg), di-n-butylamine (270l), Na-1-octane sulfate (850mg), methanol (100 ml) (amounts refer to 1 liter aqueous solution) (pH 4.3). The mobile phase was passed through a Waters 5 resolve C₁₈ column using a Waters 590 pump and m460 electrochemical detector and 740 data module, Flow rate was 0.9ml/min. Using this method, normal values in human and swine left ventricular myocardium and human and swine plasma have been established for norepinephrine, epinephrine, and dopamine.     

Prediction of the retention indices of methyl pyridines and pyrazines in capillary gas chromatography based on the non-linear additivity of the sorption energy

Summary Methylbenzenes, pyridines and pyrazines were investigated on fused-silica and glass capillary columns coated with SE-30 and PEG-40M/KF liquid phases, at two temperatures, 80° and 110°C. The contribution of the methylene groups to the partial molar free sorption energy was determined for methylpyridines and pyrazines. Equations are proposed for the calculation of the retention indices of methyl pyridines and pyrazines. These equations are based on the ortho- and α-effects of the methyl groups. The predicted indices have been experimentally tested for six dimethyl- and trimethylpyridines, and four methylpyrazines. Good accuracy of the calculation permits to use this method for the identification of methylpyridines and pyrazines in complex mixtures. Enlarged text of the paper presented at the Eighth International Symposium on Capillary Chromatography, Riva del Garda, Italy, May 19–21, 1987.