Solid-state binding of dimethyl sulphoxide involving carboxylic host molecules. X-ray crystal structures of four inclusion species

The crystal structures of four dimethyl sulphoxide (DMSO) inclusion compounds with different carboxylic acid hosts,1–4, have been studied by single crystal X-ray analysis. Crystals of thetrans-9,10-dihydro-9,10-ethanoanthracene-11,12-dicarboxylic acid inclusion compound (1a), [1 · DMSO (1: 1)] show monoclinic (P2₁/n) symmetry with the unit cell dimensionsa = 11.522(4),b = 18.658(2),c = 8.709(1) Å and = 98.92(2)°. The clathrate of the 9,10-dihydro-9,10-ethanoanthracene-11,12-dicarboxylic acid (2a), [2 · DMSO (1: 2)] is triclinic (P) with the cell dimensionsa = 15.043(7),b =9.657(4),c = 8.118(7) Å, = 101.81(5), = 96.05(4) and = 100.04(4)°. Triclinic (P) symmetry is shown also by the inclusion compound of 9,10-dihydro-9,10-ethanoanthracene-11-monocarboxylic acid (3a) [3 · DMSO (1:1)] with the cell dimensionsa=6.3132(1),b=7.9846(2),c=17.5314(4) Å, = 96.46(2), = 87.08(2) and = 106.02(2)°. The 9,9-bianthryl-2-monocarboxylic acid clathrate (4a) [4 · DMSO (1:1)] is monoclinic (P2₁/n) and the cell dimensions area = 19.625(18),b = 8.817(1),c = 14.076(8) Å and = 97.92(6)°. In all these structures, the hosts show the same basic recognition pattern for the DMSO guest, involving a strong O-H ... O bond from the COON to the S=O group, and a possible C-H ... O type interaction between the carbonyl O atom of the host and a CH₃ group of the guest. The crystals consist of discrete host-guest aggregates which are mainly held together by weak intermolecular interactions of the Van der Waals' type. The stoichiometries of the aggregates are, however, different.     

Comparison of Different Sorbents for Solid-Phase Extraction of Phenoxyalkanoic Acid Herbicides

An HPLC procedure for determination of phenoxyalkanoic acid herbicides in water samples is proposed. The analytical column Phenomenex C18(2) Luna 5 µm and UV detection at 225 nm were applied. Baseline resolution was achieved in isocratic mode with a mobile phase consisting of acetonitrile/acetic acid (40/60, v/v), adjusted to pH 2.5. SPE sorbents – C₁₈ BondElut, phenyl-silica, LiChrolut SAX and polymeric sorbents – were compared for isolation and preconcentration of 6 phenoxyalkanoic acid herbicides. Higher (above 95%) and more reproducible recoveries were obtained with polymeric and phenyl-silica sorbents using pure methanol for elution. The method was tested for river water samples with the limit of detection in the range of 2–3 µg L⁻¹ (for 50 mL sample) and a reproducibility of 5% RSD.     

Development and validation of a capillary electrophoresis method for the determination of phenothiazines in human urine in the low nanogram per milliliter concentration range using field-amplified sample injection

A capillary zone electrophoresis (CZE) method with ultraviolet-visible detection has been established and validated for the determination of five phenothiazines: thiazinamium methylsulfate, promazine hydrochloride, chlorpromazine hydrochloride, thioridazine hydrochloride, and promethazine hydrochloride in human urine. Optimum separation was obtained on a 64.5 cm x 75 microm bubble cell capillary using a buffer containing 150 mM tris(hydroxymethyl)aminomethane and 25% acetonitrile at pH 8.2, with temperature and voltage of 25 degrees C and 20 kV, respectively. Naphazoline hydrochloride was used as an internal standard. Field-amplified sample injection (FASI) has been applied to improve the sensitivity of the detection. Considering the influence of parameters affecting the on-line preconcentration (nature of preinjection plug, sample solvent composition, injection times, and injection voltage) and due to the significant interactions among them, in this paper we propose for the first time the application of a multivariate approach to carry out the study. The optimized conditions were as follows: preinjection plug of water for 7 s at 50 mbar, electrokinetic injection for 40 s at 6.2 kV, and 32 microm of H3PO4 in the sample solvent. Also, a solid-phase extraction (SPE) procedure is developed to obtain low detection limits and an adequate selectivity for urine samples. The combination of SPE and FASI-CZE-UV allows adequate linearities and recoveries, low detection limits (from 2 to 5 ng/mL), and satisfactory precisions (3.0-7.2% for an intermediate RSD %).     

Biosensors for environmental pollutants and food contaminants

This review article provides an overview of the most recent literature on biosensors for environmental pollutants and food contaminants. Due to the large number of publications, only papers published between 2000 and January 2003 were considered. Also, while not all of the published literature could be reviewed here, over 200 references are cited to provide a good overview of research undertaken in the last two years. Older publications are covered by a number of earlier review articles. This article provides an introduction into the field including specific consideration of the application areas, describes the typical biosensor assay format used, and is subsequently structured according to the biorecognition elements used (i.e., nucleic acids, enzymes, whole cells, tissue and whole organisms, antibodies and receptors, and biomimetic materials). In addition, a section on microbiosensing systems is provided. Since only very few microbiosensors with applications in environmental and food systems have been published, enabling technology is also covered in this article.Abbreviations BOD biological oxygen demand - cfu colony forming units - DNP dinitrophenol - GFP green fluorescent protein - NASBA nucleic acid sequence-based amplification - PCR polymerase chain reaction - ppt parts per trillion - QCM quartz crystal microbalance - SPR surface plasmon resonance     

Chemically-bonded stationary phases for thin-layer chromatography of metal ions

Summary A numer of bonded stationary phases were investigated for the separation of Cd²⁺, Cu²⁺, Fe³⁺, Mn²⁺, Ni²⁺, Pb²⁺, and Zn²⁺ by thin-layer chromatography. The effect of structure, surface loading, type of silica gel and mobile phase concentration was considered.     

Dynamic headspace liquid-phase microextraction of alcohols

A method was developed using dynamic headspace liquid-phase microextraction and gas chromatography-mass spectrometry for extraction and determination of 9 alcohols from water samples. Four different solvents, hexyl acetate, n-octanol, o-xylene and n-decane were studied as extractants. The analytes were extracted using 0.8 microl of n-octanol from the headspace of a 2 ml sample solution. The effect of sampling volume, solvent volume, sample temperature, syringe plunger withdrawal rate and ionic strength of the solution on the extraction performance were studied. A semiautomated system including a variable speed stirring motor was used to ensure a uniform movement of syringe plunger through the barrel. The method provided a fairly good precision for all compounds (5.5-9.3%), except methanol (16.4%). Detection limits were found to be between 1 and 97 microg/l within an extraction time of approximately 9.5 min under GC-MS in full scan mode.     

Correlation Analysis of the Runoff of the Rivers and the Seisms in China

In recent hundred years the annual discharge variations of the Changjiang River (represented by the Yichang station) and the Huanghe River (represented by Shanxian and Tangnaihe, respectively) have closely related to the geographical distribution of the earthquakes coming about in China in the same year, Both the occurrence of the destructive seism or seismic swarm in the river basins and the disappearance of the shocks in the east and south of the basins are the conditions that the Changjiang and Huanghe Rivers are the high flow while that the strong earthquake of magnitude 7 or more occurred in North China is the condition for the Changjiang low flow year and that of 6 or more in the Qilian Mountains area is for the Huanghe River. In the latter part of this paper, a 2-year sample is given to explain that the conditions of the 2 rivers being high flow years are that the north-south seismic belt is active and in the meanwhile no seism occurred in South China, and those of the low flow year are that the     

Molecular dynamics simulations of conserved Hox protein hexapeptides. I. Folding behavior in water solution

Molecular dynamics simulations of hexapeptides TFDWMK and LFPWMR; the highly conserved regions of Hox proteins Hox B1 and Hox B8, respectively, are carried out starting from extended structures to investigate their conformational space in water solution. In addition, we have studied TADWMK and TADAMK, where the aromatic residues Phenylalanine and Tryptophan were successively substituted for Alanine to investigate effects from the presence/absence of aromatic amino acids and interactions between them to folding behavior. The backbone of the hexapeptides in all simulations folds to a similar conformation found in experimental studies in solution. Intramolecular, hydrophobically driven interactions between the aromatic residues and internal hydrogen bonds are found to stabilize the conformations.     

Comparison of quantitative methods for analysis of polyphasic pharmaceuticals

Adequate very sensitive quantification methods are needed for the development and are also now required for the monitoring of undesirable solid form(s) as routine tests. The pre-requisite for quantitation are selectivity, sensitivity and most important the purity of standards and their proper storage, what is a challenge for metastable forms. Several analytical techniques are available such as X-ray diffraction, spectroscopy, thermal analysis and microcalorimetry. The different steps of the validation of the analytical methods and problems to be solved are discussed. Examples illustrate the different techniques and compare their possible advantages and limits. The relative standard deviation of measurements should allow for checking the homogenization procedure of mixtures for calibration. The validation should be carried out following ICH guidelines for validation of analytical methods. Comparison of different techniques in adequate concentration range add confidence in the analytical results.