Emergence of the sub‐THz central peak at phase transitions in artificial BaTiO3/(Ba,Sr)TiO3 superlattices

A prominent central peak in the sub‐THz frequency range was observed in the Raman spectra of BaTiO₃/(Ba,Sr)TiO₃ (BT/BST) superlattice grown on (001)MgO substrate. Both soft and central mode show an anomaly around 200 K and 280 K, which can be correlated with orthorhombic to monoclinic phase transition of BST and BT, respectively. The observed temperature dependence of the central mode enabled us to explain rather broad temperature dependence of the dielectric permittivity previously observed in BT/BST superlattices. (© 2015 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

使用曲面微通道板和感应电荷位置灵敏阳极的软X射线-极紫外光子计数成像探测器研究

本项目对我国空间探测的极紫外(EUV)波段大视场相机所需求的球面光子计数成像探测器的关键技术进行了研究。首先,建立了光阴极材料次级电子产出模型,利用该模型计算了软X射线-EUV波段常用的光电阴极材料—碱卤化物的次级电子产出,分析了微通道板(MCP)的次级电子产出。建立了测量MCP量子探测效率的装置,并推导出MCP量子探测效率的计算公式,测量了MCP在软X射线-EUV波段的量子效率以及MCP量子效率随掠入射角的变化。其次,建立了球面实芯微通道板的制备装置,利用高温热成型方法制备出曲率半径为150 mm球面MCP,利用光刻技术制备出有效直径为48 mm的楔条形感应电荷位置灵敏阳极,在此基础上集成了一套使用球面MCP和感应电荷位置灵敏阳极的两维光子计数成像探测器。再次,研制出包括快速前端模拟电路与后续数字电路的成像读出电路,编制了能矫正图像畸变的图像实时采集和处理软件。最后,建立了MCP探测器空间分辨率、图像线性的检测装置,对研制出的探测器性能进行了检测,检测结果表明:探测器的各项技术指标完全满足要求。     

Stimuli‐Responsive Theragrippers for Chemomechanical Controlled Release

We report on a therapeutic approach using thermo‐responsive multi‐fingered drug eluting devices. These therapeutic grippers referred to as theragrippers are shaped using photolithographic patterning and are composed of rigid poly(propylene fumarate) segments and stimuli‐responsive poly(N‐isopropylacrylamide‐co‐acrylic acid) hinges. They close above 32 °C allowing them to spontaneously grip onto tissue when introduced from a cold state into the body. Due to porosity in the grippers, theragrippers could also be loaded with fluorescent dyes and commercial drugs such as mesalamine and doxorubicin, which eluted from the grippers for up to seven days with first order release kinetics. In an in vitro model, theragrippers enhanced delivery of doxorubicin as compared to a control patch. We also released theragrippers into a live pig and visualized release of dye in the stomach. The design of such tissue gripping drug delivery devices offers an effective strategy for sustained release of drugs with immediate applicability in the gastrointestinal tract.     

Photomobile Polymer Materials with Crosslinked Liquid‐Crystalline Structures: Molecular Design,Fabrication, and Functions

Crosslinked liquid‐crystalline polymer materials that macroscopically deform when irradiated with light have been extensively studied in the past decade because of their potential in various applications, such as microactuators and microfluidic devices. The basic motions of these materials are contraction–expansion and bending–unbending, which are observed mainly in polysiloxanes and polyacrylates that contain photochromic moieties. Other sophisticated motions such as twisting, oscillation, rotation, and translational motion have also been achieved. In recent years, efforts have been made to improve the photoresponsive and mechanical properties of this novel class of materials through the modification of molecular structures, development of new fabrication methods, and construction of composite structures. Herein, we review structures, functions, and working mechanisms of photomobile materials and recent advances in this field.     

Synthesis of novel hierarchical ZSM-5 monoliths and their application in trichloroethylene removal

A self-supporting ZSM-5 monolith with a hierarchical porosity was prepared using polyurethane foam (PUF) as a structural template and a hydrothermal synthesis procedure. The synthesized monolith was characterized and investigated towards the adsorption and catalytic oxidation of trichloroethylene (TCE). Adsorption of TCE was studied gravimetrically and oxidation of TCE was studied using a vapor-phase down-flow reactor. Monolithic ZSM-5 displayed good sorption properties and completely oxidized TCE. Conversion levels of 50% and 90% were achieved at reduced temperatures (by ~50 ℃) when compared with the conversion temperatures obtained from the powder counterparts. Besides the activity of the monolith towards TCE adsorption and oxidation, it was stable and enhanced diffusion, thereby reducing pressure drops to a great extent owing to its hierarchical porous nature.     

泡沫塑料富集–石墨炉原子吸收光谱法测定贝类水产品中痕量铊

采取微波消解的前处理手段消解样品,经泡沫塑料分离富集后,用石墨炉原子吸收光谱法测定贝类水产品中痕量铊。以1.5 mL Fe3+,2 mL H2O2和5%王水介质作为吸附体系将样品中铊分离富集,再以硝酸钯、抗坏血酸作为基体改进剂进行测定。铊的质量浓度在0～50μg/L范围内线性良好,相关系数为0.999 7,方法的检出限可达0.07μg/g。测定结果的相对别准偏差为1.53%～4.01%(n=7),加标回收率为87.1%～98.3%。泡沫塑料富集–石墨炉子吸收光谱法测定贝类水产品中痕量铊是一种准确、安全、便捷的检测方法。     

Natural Soft/Rigid Superlattices as Anodes for High-Performance Lithium-Ion Batteries

Volume expansion and poor conductivity are two major obstacles that hinder the pursuit of the lithium-ion batteries with long cycling life and high power density. Herein, we highlight a misfit compound PbNbS₃ with a soft/rigid superlattice structure, confirmed by scanning tunneling microscopy and electrochemical characterization, as a promising anode material for high performance lithium-ion batteries with optimized capacity, stability, and conductivity. The soft PbS sublayers primarily react with lithium, endowing capacity and preventing decomposition of the superlattice structure, while the rigid NbS₂ sublayers support the skeleton and enhance the migration of electrons and lithium ions, as a result leading to a specific capacity of 710 mAh g⁻¹ at 100 mA g⁻¹, which is 1.6 times of NbS₂ and 3.9 times of PbS. Our finding reveals the competitive strategy of soft/rigid structure in lithium-ion batteries and broadens the horizons of single-phase anode material design.     

Fabrication of flame-retardant and smoke-suppressant isocyanate-based polyimide foam modified by silica aerogel thermal insulation and flame protection layers

Because of containing urea groups, flame resistance and smoke releasing behaviors of isocyanate-based polyimide foam (IBPIF) produced using free foaming technology require further improvement. In this work, silica aerogel layers were incorporated into cells of IBPIF through an in situ growth process of silica sol (SS). Compared with silica aerogel particles directly mixed into the foaming slurry, the silica aerogel layers that firmly attached to the pores and surfaces of cells not only provided exceptional thermal insulation and flame protection, but also kept original cellular structure. With increase in ratio of SS mass to IBPIF volume, silica aerogel incorporation dosage was gradually increased. Accompanied by flame resistance was obviously improved and smoke releasing behavior was effectively suppressed. Those were indicated by the improved limiting oxygen index (LOI), decreased heat release rate (HRR), peak of HRR, and specific optical density of smoke (Ds) in trials with pilot flames. Compared with pure IBPIF, when the ratio reached to 5/15 g/cm³, it resulted in LOI increasing from 22.0% to 33.0%, peak of HRR, total smoke production (TSP), and maximum value of Ds decreasing from 174 to 72 kW/m², 1.11 to 0.37 m²/m², 45.90 to 17.45, respectively.     

多尺度Ag/CuO复合光热材料的制备及在海水淡化中的应用

采用原位化学反应和热处理相结合的策略,在泡沫铜表面形成丝线状与花瓣状的立体无机物阵列,然后在其表面蒸镀Ag纳米颗粒(NPs),成功制备了基于泡沫铜的Ag/CuO复合光热材料。该复合材料因表面三维立体阵列结构以及Ag NPs而具备较高的太阳光吸收率。故而,Ag/CuO复合光热材料结合三聚氰胺泡沫组成的蒸发器件实现了高效的海水淡化。本研究除了探索光陷阱深度和金属掺杂对吸收体光热转换效率增强之外,还搭建了太阳能驱动界面蒸汽生成测试系统,测试了样品的光热蒸发性能。在1倍太阳(1 kW·m~(-2))辐照下,该器件整体蒸发速率高达1.097 6 kg·m~(-2)·h~(-1),即其蒸发效率可达78.38%。