Partitioning behaviour of organic compounds between ionic liquids and supercritical fluids

Applications and prospects of two-phase, tuneable solvent systems composed of ionic liquids (ILs) and supercritical fluids with an emphasis on supercritical carbon dioxide (scCO(2)) are reviewed. The IL-scCO(2) biphasic systems have increasingly been used in diverse fields of chemistry and technology, and some examples of these applications are mentioned here. Rational design of such applications can obviously benefit from pertinent data on phase equilibria including the partition coefficients of the prospective products and reactants between the two phases. Therefore, a reliable technique to measure the limiting partition coefficients would be of value. Here, the pros and cons of supercritical fluid chromatography in this respect are discussed. An overview of methods for predictive thermodynamic modelling of binary (IL-scCO(2)) and ternary (solute-IL-scCO(2)) systems is also included.     

以SDS-PVP项链状软团簇为模板简易一锅法合成Cu2O中空亚微球

在SDS-PVP水溶液中采用N2H4•H2O还原CuSO4, 在pH (10±0.5), (40±1.0) ℃条件下反应55 min得到橙色Cu2O溶胶, 离心分离产物经XRD鉴定为Cu2O立方晶系晶体; SEM和TEM表明该法获得的晶体为形状规整、粒径分布窄的Cu2O中空亚微球, 并证实系由大量10 nm量级的原级Cu2O纳米晶粒组装而成. 根据实验事实推断, SDS-PVP项链状软团簇提供了“双重软模板”功能, 借助独特的“模板诱导两级组装”作用一锅法合成了Cu2O中空亚微球. Cu2O中空亚微球生长的可能途径为: 首先, 项链状软团簇中的SDS束缚胶束作为第一重软模板, 诱导一级组装10 nm量级的原级Cu2O纳米晶粒; 然后, 软团簇中立体桥联SDS束缚胶束的PVP链节作为第二重软模板, 诱导一定空间范围内的原级Cu2O纳米晶粒长大并进一步聚集/二级组装, 经一锅法合成得到次级Cu2O中空亚微球. 实验结果证明该一锅法温和、简便、快捷, Cu2O中空亚微球的粒径分布窄.     

Bioprocess for solubilization of rock phosphate on starch based medium by Paecilomyces marquandii immobilized on polyurethane foam

Paecilomyces marquandii, a phosphate-solubilizing, starch-utilizing filamentous fungus, was immobilized on polyurethane foam (PUF). The immobilized fungus was applied in a repeated batch (six batches) fermentation process to solubilize Hirapur rock phosphate. The fungus was immobilized on PUF cubes and was used for phosphate solubilization in shake flask repeated batch cultivations. The fungus was also immobilized on PUF sheet and utilized in an airlift bioreactor in a repeated batch process. Maximum soluble phosphate (370 μg/ml) was recorded after third batch with 8 g rock phosphate/l. After 12 days of fermentation, a total production of 1,643 μg phosphate/ml was achieved.     

Metal foams: A survey

The current state-of-the-art in the development of cellular metal foams is reviewed, with focus on their fabrication, mechanical/thermal/acoustic properties, and potential applications as lightweight panels, energy absorbers, heat exchangers, and acoustic liners. Foam property charts with scaling relations are presented, allowing scoping and selection through the use of material indices.     

Hierarchical structure in polymer‐based drug delivery systems as probed by calorimetric measurements

Thermoporosimetry (TPM), a differential scanning calorimetry technique that relies on the shift of transition temperatures caused by the confinement of liquids, was applied to elucidate the complex morphology of drug‐loaded polymeric microcapsules prepared by the emulsion solvent evaporation method. For the very first time, TPM has been applied simultaneously with two liquids as structural probes. It was found that Miglyol, which dissolves the selected drug (Ibuprofen), is confined inside vesicles having a mean radius of 26.3 nm, whereas water, which is the continuous phase, is trapped inside a swollen polymeric network of Eudragit with an average mesh radius of 1.7 nm. A proposed hierarchical structure is given, which predicts that Eudragit microcapsules are formed from a collection of inert oil vesicles partitioned by polymeric Eudragit membranes swollen by water. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1939–1945, 2010     

Self‐Assembly Studies of a Chiral Bisurea‐Based Superhydrogelator

A chiral bisurea‐based superhydrogelator that is capable of forming supramolecular hydrogels at concentrations as low as 0.2 mM is reported. This soft material has been characterized by thermal studies, rheology, X‐ray diffraction analysis, transmission electron microscopy (TEM), and by various spectroscopic techniques (electronic and vibrational circular dichroism and by FTIR and Raman spectroscopy). The expression of chirality on the molecular and supramolecular levels has been studied and a clear amplification of its chirality into the achiral analogue has been observed. Furthermore, thermal analysis showed that the hydrogelation of compound 1 has a high response to temperature, which corresponds to an enthalpy‐driven self‐assembly process. These particular thermal characteristics make these materials easy to handle for soft‐application technologies.     

A New Ceramide from the Soft Coral Cladiella humesi Verseveldt

Ceramides are increasingly becoming important compounds because of their markedbiological activity. The 2000 International Gordon Research Conference on "Glycolipidand Sphingolipid Biology" will be held in May in italy. It has been recently found thatceramides inhibit Cholesteryl Ester Transfer Protein (CETP)'. Elevation in CETP leadsto atherosclerotic cardiovascular diseases2. A literature survey showed that ceramideswere antifungal', and some of these showed antimicrobial and cytotox…     

Determination of traces of nitrite and nitrate in water by solid phase spectrophotometry

A simple and sensitive method for the determination of nitrite and nitrate in water using solid phase spectrophotometry is described. The method utilizes the quantitative and rapid sorption of the dye formed from nitrite, using the Griess reaction, into a thin layer of polyurethane foam (PUF) where a preconcentration factor of >140 has been achieved. Nitrate is pre-reduced using a cadmium reductor before applying the Griess reaction. The direct spectrophotometric measurement of the dye enriched in the solid foam phase has allowed the detection of as little as 5 and 40 ng ml⁻¹ nitrite and nitrate, respectively. Optimization of the parameters affecting the quantitative formation and sorption of the dye into PUF has been considered. Analysis of natural water samples has been performed.     

Use of blowing catalysts for integral skin polyurethane applications in a controlled molecular architectural environment: Synthesis and impact on ultimate physical properties

Polyurethane elastomers of a controlled molecular architecture were synthesized using a two‐step polymerization technique. The building blocks of the elastomeric materials included urea–urethane prepolymers end‐capped with diisocyanate groups and had an exact number of urea groups at both ends. Two‐dimensional bifurcated hydrogen‐bonding networks incorporating the urea groups were, with differential scanning calorimetric and dynamic mechanical thermal analyzer techniques, responsible for the increase in the glass‐transition temperature (T_g) of the hard block and sharp interface morphology between the pure “hard” domains and pure “soft” domains. The higher extent of the phase separation between the two phases contributed to higher elastic moduli for the hard blocks and higher tensile strength for the elastomeric samples. Higher elongation values were attributed to the liberation of the elastomeric chain ends that otherwise would have been constrained in the interface region. The higher T_g values of the hard blocks corresponded to an increase in the hardness values and a decrease in the tear‐strength values. The increase in the amount of urea groups within the hard segments, as a result of the increased amount of water and blowing catalyst, resulted in elastomeric foams with higher open‐cell content. This resulted in lower resilience values as measured using the pendulum rebound test and was attributed to the ability of the open cells to absorb and dissipate energy. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2526–2536, 2002     

Effect of Pluronic F127 on the pore structure of macrocellular biodegradable polylactide foams

Thermally induced phase separation technique was utilized to fabricate biodegradable poly(l ‐lactic acid) (PLLA) macrocellular foams which were capable of being applied in tissue engineering. The block copolymer Pluronic F127 composed of (polyethyleneoxide)‐(polypropyleneoxide)‐(polyethyleneoxide) [(PEO)‐(PPO)‐(PEO)] was used as a porogen. Water/dioxane mixtures with different volume ratios were used as solvents. The addition of Pluronic F127 could induce an appearance of large pores (50–200 μm) besides small pores (10–20 μm) or a change from a solid–liquid phase separation to a liquid–liquid phase separation. The role of Pluronic F127 depends on the water/dioxane ratios in the PLLA/dioxane/water system. The X‐ray diffraction patterns and porosity measurement results showed that Pluronic F127 was crystallized and existed on the pore wall. The effect of Pluronic F127 on changing pore structure is attributed to the occurrence of the interaction of the lipophilic PPO blocks in Pluronic F127 with PLLA clews, consequently, this results in PLLA aggregation and early phase separation on cooling. Copyright © 2004 John Wiley & Sons, Ltd.