Versatile functional poly(3‐hexylthiophene) for hybrid particles synthesis by the grafting onto technique: Core@shell ZnO nanorods

We demonstrate an efficient strategy to anchor poly(3‐hexylthiophene) (P3HT) onto zinc oxide (ZnO) surfaces. Synthesis of a novel triethoxysilane‐terminated regioregular P3HT is herein reported and supported by thorough characterization. Three triethoxysilane‐terminated P3HTs of different molar masses were prepared via a hydrosilylation reaction from allyl‐terminated P3HT. MALDI‐TOF and ¹H NMR were performed to characterize the polymer and show that around 80% of the chains are end‐functionalized. These polymers were then grafted onto the ZnO nanorods to create a macromolecular self‐assembled monolayer. This versatile technique could be subsequently applied to different metal oxide surfaces, such as silicon, titanium, or indium‐tin oxide, and represents a new one‐pot strategy based on triethoxysilane coupling reaction. Importantly, the influence of the molar mass on the grafting density and the polymer shell thickness was studied via thermo gravimetric analysis and transmission electron microscopy. The optical properties of the hybrid materials were determined by UV–visible absorption and photoluminescence to show a quenching effect of P3HT fluorescence by ZnO when grafted. This electronic transfer associated with an improved miscibility of the ZnO@P3HT, makes these hybrid materials suitable candidates for photovoltaic applications. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 30–38     

Immobilized copper(II) on nitrogen‐rich polymer‐entrapped Fe3O4 nanoparticles: a highly loaded and magnetically recoverable catalyst for aqueous click chemistry

A heterogeneous magnetic copper catalyst was prepared via anchoring of copper sulfate onto multi‐layered poly(2‐dimethylaminoethyl acrylamide)‐coated magnetic nanoparticles and was characterized using various techniques. The catalyst was found to be active, effective and selective for one‐pot three‐component reaction of alkyl halide, sodium azide and alkyne, known as copper‐catalyzed click synthesis of 1,2,3‐triazoles. As little as 0.3 mol% of catalyst was found to be effective under the optimum conditions. The catalyst could also be recycled and reused up to seven times without significant loss of activity. Thermal stability, high loading level of copper on catalyst, broad diversity of alkyl/benzyl/allyl bromide/chloride and alkyl/aryl terminal alkynes without isolation of azide intermediate, and good to excellent yields of products make this procedure highly economical. Copyright © 2015 John Wiley & Sons, Ltd.     

Highly active polymeric organocatalyst: Chiral ionic polymers prepared from 10,11‐didehydrogenated cinchonidinium salt

Since few examples of 10,11‐didehydrogenated (3‐ethynyl) cinchona alkaloids have been utilized as organocatalysts in asymmetric reaction, we synthesized 10,11‐didehydrogenated cinchonidine. The 3‐vinyl group of cinchonidine was transformed into a 3‐ethynyl functionality. Based on the resulting 10,11‐didehydrogenated cinchonidine, the corresponding quaternary ammonium salt and its dimers were prepared. The ion‐exchange reaction between the quaternary ammonium salt and sodium sulfonate produced the quaternary ammonium sulfonate as a stable ionic compound. Chiral ionic polymers were then synthesized by the ion‐exchange polymerization of the 10,11‐didehydrogenated cinchonidinium salt dimer and a disulfonate. The chiral ionic polymers were found to be capable of efficiently catalyzing the asymmetric alkylation of N‐(diphenylmethylene)glycine tert‐butyl ester. The enantioselectivities obtained with the polymeric catalysts were higher than those obtained with the corresponding monomeric catalyst. Dimers of 10,11‐didehydrogenated cinchonidinium salts were prepared. Treatment of the dimer with disodium disulfonate gave the chiral ionic polymers, which showed high catalytic activity in asymmetric benzylation of N‐(diphenylmethylen)glycine tert‐butyl ester. The polymeric catalysts were reused several times without the loss of catalytic activity. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 621–627     

Green solvent approach for printable large deformation thermoplastic elastomer based piezoresistive sensors and their suitability for biomedical applications

Composites based on biocompatible thermoplastic elastomer styrene‐ethylene/butylene‐styrene (SEBS) as matrix and multi‐walled carbon nanotubes (MWCNT) as nanofillers show excellent mechanical and piezoresistive properties from low to large deformations. The MWCNT/SEBS composites have been prepared following a green solvent approach, to extend their range of applicability to biomedical applications. The obtained composites with 2, 4, and 5 wt % MWCNT content provide suitable piezoresistive response up to 80% deformation with a piezoresistive sensibility near 2.7, depending on the applied strain and MWCNT content. Composite sensors were also developed by spray and screen printing and integrated with an electronic data acquisition system with RF communication. The possibility to accurately control the composites properties and performance by varying MWCNT content, viscosity, and mechanical properties of the polymer matrix, shows the large potential of the system for the development of large deformation printable piezoresistive sensors. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 2092–2103     

Effect of permodified β‐cyclodextrin on the photophysical properties of poly[2,7‐(9,9‐dioctylfluorene)‐alt‐(5,5′‐bithiophene)] main chain polyrotaxanes

The photophysical properties of two polyrotaxanes ( PFBTh?PSβCD and PFBTh?PMeβCD ) composed of fluorene and bithiophene encapsulated into permodified β‐cyclodextrin cavities have been investigated and compared with those of the reference PFBTh . Rotaxane formation results in improvements of the thermal stability, solubility in common organic solvents, as well as better film forming ability combined with a high transparency. As expected PFBTh and its encapsulated forms absorb at wavelengths beyond 510 nm, and time‐resolved photoluminescence (PL) in solution shows a well‐define vibronic structures with a predominance of the 0‐0 transitions and an energy difference of 0.16 eV. The fluorescence lifetimes follow a monoexponential decay with a value τ = 630 ± 30 ps. Atomic force microscopy, AFM, indicated a tendency of polyrotaxanes to organize into fibers. The advancing contact angles indicated higher surface hydrophobicity and lower surface free‐energy values for polyrotaxanes compared with their unthreaded analogues. The device based on PFBTh?PSβCD: PCBM in a 1/1 w/w ratio under simulated AM 1.5G illumination at 100 mW cm^?2 exhibited improved photovoltaic parameters of cells, resulted in high V_oc (0.68 V), J_sc (1.65 mA cm^?2), FF (31.6%), and PCE (0.35) values, compared with PFBTh or PFBTh?PMeβCD , respectively. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 460–471     

UV-Derivative Spectrophotometric Determination of Ritonavir Capsules and Comparison with LC Method

Abstract

An ultraviolet-derivative spectrophotometric method (UV-D) has been proposed as an alternative to a previously described liquid chromatographic (LC) method for the quantitative determination of ritonavir in soft gelatin capsules. The spectrophotometric method is based on recording the second-derivative spectra for ritonavir at 222.3 nm of its solutions in methanol. The linear dynamic range was 10.0–30.0 µg · mL^?1 with a correlation coefficient of 0.9995. Mean recoveries were between 99.2% and 100.2% for the tested capsules samples. Mean intra- and interassay relative standard deviations (RSDs) were less than 2.0%. The statistic analysis showed that LC and UV-D methods were equivalent to assay ritonavir capsules.     

Two negative minima of the first normal stress difference in a cellulose‐based cholesteric liquid crystal: Helix uncoiling

The shear rate dependence of material functions such as shear viscosity (η) and the first normal stress difference (N₁) were given and interpreted earlier by Kiss and Porter. Their widely accepted work revealed the possibility of having a negative minimum of N₁ for polymeric liquid crystals. In this work, we disclose for the first time the evidence of two negative N₁ minima on a sheared cellulosic lyotropic system. The lower shear rate minimum is ascribed to the uncoiling of the cholesteric helix, as theoretically predicted earlier. Our findings contribute also to the understanding of the other minimum already reported in the literature and attributed to the nematic director tumbling mode. Moreover, the elastic change that the LC‐HPC sample undergoes during the helix unwinding of the cholesteric structure is also by means of oscillatory measurements. This study is a contribution for the understanding of the structure‐properties relationship linked with the complex rheological behavior of chiral nematic cellulose‐based systems and may help to improve their further processing. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 821–830     

Developments in antimicrobial polymers

Effective antimicrobial polymers have been attracting more interests because of the low propensity to cause drug-resistant microorganisms. The recent progresses in antimicrobial polymers are updated according to the action approaches, that is, antimicrobial polymers with free mobility or fixed on surfaces, respectively. Free antimicrobial polymers kill pathogens majorly via electrostatic interaction followed by disruption of the cell membranes; strong antimicrobial activity of primary/secondary amines, new chemical units, and peptides without facial amphiphilicity are highlighted; and the dependences on amphiphilicity, topology, and self-assembly profiles are summarized. Antimicrobial polymers fixed on surfaces kill pathogens via interaction with the cell membranes of pathogens via electrostatic or hydrophobic interaction; approaches to antimicrobial surfaces based on covalently grafting, anchoring, and bulk-mixing of polymers are summarized; and new designs of sustainable antimicrobial surfaces and hydrogels are highlighted. Deep biology understanding and development strategies of materials are suggested for the future. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 632–639     

Crystallographic and computational study of a network composed of [ZnCl4]2− anions and triply protonated 4′‐functionalized terpyridine cations

We report herein the synthesis, crystallographic analysis and a study of the noncovalent interactions observed in the new 4′‐substituted terpyridine‐based derivative bis[4′‐(isoquinolin‐2‐ium‐4‐yl)‐2,2′:6′,2′′‐terpyridine‐1,1′′‐diium] tris[tetrachloridozincate(II)] monohydrate, (C₂₄H₁₉N₄)₂[ZnCl₄]₃·H₂O or (ITPH₃)₂[ZnCl₄]₃·H₂O, where (ITPH₃)³⁺ is the triply protonated cation derived from 4′‐(isoquinolin‐4‐yl)‐2,2′:6′,2′′‐terpyridine (ITP) [Granifo et al. (2016). Acta Cryst. C 72 , 932–938]. The (ITPH₃)³⁺ cation presents a number of interesting similarities and differences compared with its neutral ITP relative, mainly in the role fulfilled in the packing arrangement by the profuse set of D —H…A [D (donor) = C, N or O; A (acceptor) = O or Cl], π–π and anion…π noncovalent interactions present. We discuss these interactions in two different complementary ways, viz. using a point‐to‐point approach in the light of Bader's theory of Atoms In Molecules (AIM), analyzing the individual significance of each interaction, and in a more `global' analysis, making use of the Hirshfeld surfaces and the associated enrichment ratio (ER) approach, evaluating the surprisingly large co‐operative effect of the superabundant weaker contacts.