Mechanical and corrosion resistance of hydrophilic sphene/titania composite coatings on titanium and deposition and release of cefazolin sodium/chitosan films

The mechanical and corrosion resistance of hydrophilic sphene/titania composite coatings on titanium formed by a hybid technique of microarc oxidation (MAO) and heat-treatment were investigated. The results indicated that the heat-treatment could improve the hardness, elastic modulus, elastic recovery and corrosion resistance of the MAO coatings, and reinforce the interface bonding between MAO coatings and titanium. A cefazolin sodium/chitosan drug film was prepared on the coating surfaces. The drug load procedures such as the addition of chitosan obviously increased the sustained-release ability of drug films. In addition, the increase of cefazolin sodium concentration could increase the accumulative release concentration of cefazolin sodium. The sustaining-release ability of drug films deposited on the MAO and heat-treated MAO coatings is similar. In the interior of drug film, the physical and chemical bonding reactions such as Coulombic interactions, van der Waals force and H-bonding etc. could be produced, through the chemical group interactions such as -OH and -NH₂ groups of chitosan with -CO of cefazolin sodium.     

Interaction of H2S with α-Fe2O3(0 0 0 1) surface

The atomic-scale structural changes in an α-Fe₂O₃ (hematite) (0 0 0 1) surface induced by sulfidation and subsequent oxidation processes were studied by X-ray photoemission spectroscopy, LEED, and X-ray standing wave (XSW) measurements. Annealing the α-Fe₂O₃(0 0 0 1) with a H₂S partial pressure of 1 × 10⁻⁷ Torr produced iron sulfides on the surface as the sulfur atoms reacted with the substrate Fe ions. The oxidation state of the substrate Fe changed from 3+ to 2+ as a result of the sulfidation. The XSW measured distance of the sulfur atomic-layer from the unrelaxed substrate oxygen layer was 3.16 Å. The sulfide phase consisted of three surface domains identified by LEED. Formation of the two-dimensional FeS₂ phase with structural parameters consistent with an outermost layer of (1 1 1) pyrite has been proposed. Atomic oxygen exposure oxidized the surface sulfide to a sulfate () and regenerated the α-Fe₂O₃(0 0 0 1) substrate, which was indicated by a (1 × 1) LEED pattern and the re-oxidization of Fe to 3+.     

Morphological and chemical study of the initial growth of CdS thin films deposited using an ammonia-free chemical process

We study the initial growth stages of CdS thin films deposited by an ammonia-free chemical bath deposition process. This ammonia-free process is more environmentally benign because it reduces potential ammonia release to the environment due to its high volatility. Instead of ammonia, sodium citrate was used as the complexing agent. We used atomic force microscopy (AFM), Rutherford backscattering (RBS) and X-ray photoelectron spectroscopy (XPS) to investigate the morphological and chemical modifications at the substrate surface during the first initial stages of the CdS deposition process. Additionally, X-ray diffraction (XRD) and optical transmission spectroscopy measurements were carried out to compliment the study. XPS results show that the first nucleation centers are composed by Cd(OH)₂ which agglomerate in patterns of bands, as demonstrated by AFM results. It is also observed that the conversion to CdS (by anionic exchange) of the first nucleus begins before the substrate surface is completely covered by a homogenous film.     

Influence of sodium alginate pretreated by ultrasound on papain properties: Activity,structure, conformation and molecular weight and distribution

The aim of the study was to investigate the impact of sodium alginate (ALG) pretreated by ultrasound on the enzyme activity, structure, conformation and molecular weight and distribution of papain. ALG solutions were pretreated with ultrasound at varying power (0.05, 0.15, 0.25, 0.35, 0.45 W/cm²), 135 kHz, 50 °C for 20 min. The maximum relative activity of papain increased by 10.53% when mixed with ALG pretreated by ultrasound at 0.25 W/cm², compared with the untreated ALG. The influence of ultrasound pretreated ALG on the conformation and secondary structure of papain were assessed by fluorescence spectroscopy and circular dichroism spectroscopy. The fluorescence spectra revealed that ultrasound pretreated ALG increased the number of tryptophan on papain surface, especially at 0.25 W/cm². It indicated that ultrasound pretreatment induced molecular unfolding, causing the exposure of more hydrophobic groups and regions from inside to the outside of the papain molecules. Furthermore, ultrasound pretreated ALG resulted in minor changes in the secondary structure of the papain. The content of α-helix was slightly increased after ultrasound pretreatment and no significant change was observed at different ultrasound powers. ALG pretreated by ultrasound enhanced the stability of the secondary structure of papain, especially at 0.25 W/cm². The free sulfhydryl (SH) content of papain was slightly increased and then decreased with the increase of ultrasonic power. The maximum content of free SH was observed at 0.25 W/cm², under which the content of the free SH increased by 6.36% compared with the untreated ALG. Dynamic light scattering showed that the effect of ultrasound treatment was mainly the homogenization of the ALG particles in the mixed dispersion. The gel permeation chromatography coupled with the multi-angle laser light scattering photometer analysis showed that the molecular weight (M_w) of papain/ALG was decreased and then increased with the ultrasonic pretreatment. Results demonstrated that the activity of immobilized papain improved by ultrasonic pretreatment was mainly caused by the variation of the conformation of papain and the effect of interactions between papain and ALG. This study is important to explain the intermolecular interactions of biopolymers and the mechanism of enzyme immobilization treated by ultrasound in improving the enzymatic activity. As expected, ALG pretreated by appropriate ultrasound is promising as a bioactive compound carrier in the field of immobilized enzyme.     

Scanning probe microscopy studies of PbS surfaces oxidized in air and etched in aqueous acid solutions

Natural n-type PbS single crystals have been studied using AFM, STM and STS after long-term oxidation in air at ambient temperatures and extensive etching in aqueous acid solutions, in contrast to previous work devoted to initial corrosion of fresh surfaces. The exposure of PbS to atmosphere at high relative humidity for several days yields widespread loose oxidation products; the process is much slower at low humidity. Surface morphologies diverge after the treatment in 1 M perchloric and hydrochloric acid solutions at room temperature and become widely different at elevated temperatures, displaying commonly etch pits up to several micrometers in size and depth along with rather uniformly distributed 20-100 nm protrusions of PbS phase. The changes both in topography and semiconducting properties of PbS found by tunneling spectroscopy have been explained in terms of the non-uniform distribution of donor- and acceptor-type defects D⁺/D⁻ in the metal depleted surface layer, which are generated by chemical reactions and, in turn, determine the rates of the PbS corrosion. In particular, the D⁻ centers exhibit a self-catalyzing effect on the non-oxidative local dissolution of PbS in HCl media, resulting in the deep etch pits.     

Optical properties of cadmium sulfide nanocrystal film prepared by electrochemical synthesis at liquid-liquid interface

Dendritic nanocrystalline CdS film was deposited at liquid-liquid interface of surfactants and an electrolyte containing 4 mmol L⁻¹ cadmium chloride (CdCl₂) and 16 mmol L⁻¹ thioacetamide (CH₃CSNH₂) with an initial pH value of 5 at 15 °C by electrochemical synthesis. The nanofilm was characterized by transmission electron microscopy (TEM), field emission scanning electron microscope (FE-SEM), atomic force microscopy (AFM), ultraviolet visible (UV-vis) absorption spectroscopy and fluorescence spectroscopy. The surface morphology and particle size of the nanofilm were investigated by AFM, SEM and TEM, and the crystalline size was 30-50 nm. The thickness of the nanofilm calculated by optical absorption spectrum was 80 nm. The microstructure and composition of the nanofilm was investigated by X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS), showing its polycrystalline structure consisting of CdS and Cd. Optical properties of the nanofilm were investigated systematically by UV-vis absorption and fluorescence spectroscopy. A λ_onset blue shift compared with bulk CdS was observed in the absorption spectra. Fluorescence spectra of the nanofilm indicated that the CdS nanofilm emitted blue and green light. The nanocomposites film electrode will bring about anodic photocurrent during illumination, showing that the transfer of cavities produces photocurrent.     

Concentrated second‐harmonic generation from a single Al‐covered ZnS nanobelt

Here we report on the hybrid nanostructures where a single ZnS nanobelt was half‐covered with an aluminum (Al) film, which is an ideal platform for studying the second‐harmonic generation (SHG) enhancement effects of the Al coating. It was fabricated by the lift‐off process and allowed for the accurate comparison of the SHG intensity between the Al‐covered and the same bare ZnS nanobelt under consistent test conditions. The results indicate that the Al coating in the hybrid nanostructures not only confines the pumping laser in the ZnS effectively, but also concentrates the emitted SHG signal greatly, increasing the signal collection efficiency. By the combination of these two effects, ∼60 times enhancement of the SHG intensity is achieved at the optimized geometry size (width and thickness) of the ZnS nanobelts. The Al‐based hybrid nanostructures open up new possibilities for low‐cost, highly efficient and directional coherent nanolight sources at short wavelengths.

     

Deposition of ZnS thin film by ultrasonic spray pyrolysis: effect of thickness on the crystallographic and electrical properties

Zinc sulfide (ZnS) thin films have been deposited on Si (1 0 0) substrate using ultrasonic spray pyrolysis. X-ray diffraction (XRD) analysis revealed that the films are (0 0 2) preferentially oriented with c-axis-oriented wurtzite structure. The crystallinity has been found to improve with film thickness in the 180–6000 nm range. Film structure has been analyzed by XRD, scanning electron microscope, FTIR, and Raman spectroscopies, while the stoichiometry has been verified by energy-dispersive spectroscopy and particle-induced X-ray emission techniques. Electrical properties of the grown films were characterized by current–voltage and capacitance–voltage measurements where, the films show better conducting behavior at higher thickness.     

Interrelation between inhomogeneity and cyclability in O3‐NaFe1/2Co1/2O2

O3‐NaFe_1/2Co_1/2O₂ shows initial capacity of 160 mAh/g and an average operating voltage of 3.1 V (vs. Na) with good cyclability, and is a promising candidate of the cathode materials for sodium‐ion secondary batteries (SIBs). Here, we found that the cyclability of the slowly‐cooled sample is much worse than that of quenched one, even though the former sample keeps the O3‐type structure. The energy dispersive X‐ray spectroscopy (EDX) images suggest that the slow‐cooled sample (Na_x Fe_1–yCo_y O₂) is inhomogeneous in the Fe concentration (1 – y), perhaps triggered by the Na deficiency (1 – x). We ascribed the poor cyclability in the slowly‐cooled sample to the concentration inhomogeneity (Δy). The Δy is further responsible for the fluctuation of the lattice constants (a and c), as revealed by the Williamson–Hall plot. (© 2016 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

直接溶样-火焰原子发射光谱法测定金属钠中的杂质钾

中国实验快堆（CEFR）选用金属钠做为冷却剂,其中杂质钾对它的热性能产生影响。为了核级钠中钾的含量,建立了直接溶样－火焰原子发射光谱法测定钠中的杂质钾的方法。实验中研究了超声波加湿溶样系统,优选了燃气（C2H2）、助燃气（Air)流量和燃烧器高度等工作参数,研究了酸效应、基体钠和共存元素的干扰效应。进行了高纯钠中加钾的回收实验,回收率在94．7％－109．8％之间,相对标准偏差为4．2％。本方法能够满足核级钠中杂质钾的分析要求,也适应于工业钠和高纯钠中钾的分析。