Nanocomposite Polymer Electrolytes of Sodium Alginate and Montmorillonite Clay

Nanocomposite polymer electrolytes (NPEs) were synthesized using sodium alginate (Alg) and either sodium (SCa-3-Na⁺)- or lithium (SCa-3-Li⁺)-modified montmorillonite clays. The samples were characterized by structural, optical, and electrical properties. SCa-3-Na⁺ and SCa-3-Li⁺ clays’ X-ray structural analyses revealed peaks at 2θ = 7.2° and 6.7° that corresponded to the interlamellar distances of 12.3 and 12.8 Å, respectively. Alg-based NPEs X-ray diffractograms showed exfoliated structures for samples with low clay percentages. The increase of clay content promoted the formation of intercalated structures. Electrochemical Impedance Spectroscopy revealed that Alg-based NPEs with 5 wt% of SCa-3-Na⁺ clay presented the highest conductivity of 1.96 × 10⁻² S/cm², and Alg with 10 wt% of SCa-3-Li⁺ showed conductivity of 1.30 × 10⁻² S/cm², both measured at 70 °C. From UV-Vis spectroscopy, it was possible to infer that increasing concentration of clay promoted a decrease of the samples’ transmittance and, consequently, an increase of their reflectance.     

Lateral Metallation and Redistribution Reactions of Sodium Ferrates Containing Bulky 2,6-Diisopropyl-N-(trimethylsilyl)anilide Ligands

Alkali-metal ferrates containing amide groups have emerged as regioselective bases capable of promoting Fe−H exchanges of aromatic substrates. Advancing this area of heterobimetallic chemistry, a new series of sodium ferrates is introduced incorporating the bulky arylsilyl amido ligand N(SiMe₃)(Dipp) (Dipp=2,6-iPr₂-C₆H₃). Influenced by the large steric demands imposed by this amide, transamination of [NaFe(HMDS)₃] (HMDS=N(SiMe₃)₂) with an excess of HN(SiMe₃)(Dipp) led to the isolation of heteroleptic [Na(HMDS)₂Fe{N(SiMe₃)Dipp}]_∞ ( 1 ) resulting from the exchange of just one HMDS group. An alternative co-complexation approach, combining the homometallic metal amides [NaN(SiMe₃)Dipp] and [Fe{N(SiMe₃)Dipp}₂] induces lateral metallation of one Me arm from the SiMe₃ group in the iron amide furnishing tetrameric [NaFe{N(SiCH₂Me₂)Dipp}{N(SiMe₃)Dipp}]₄ ( 2 ). Reactivity studies support that this deprotonation is driven by the steric incompatibility of the single metal amides rather than the basic capability of the sodium reagent. Displaying synergistic reactivity, heteroleptic sodium ferrate 1 can selectively promote ferration of pentafluorobenzene using one of its HMDS arms to give heterotrileptic [Na{N(SiMe₃)Dipp}(HMDS)Fe(C₆F₅)]_∞ ( 4 ). Attempts to deprotonate less activated pyridine led to the isolation of NaHMDS and heteroleptic Fe(II) amide [(py)Fe{N(SiMe₃)Dipp}(HMDS)] ( 5 ), resulting from an alternative redistribution process which is favoured by the Lewis donor ability of this substrate.     

Cooling crystallization of aluminum sulfate in pure water modulated by sodium dodecylbenzenesulfonate

This study investigated the cooling crystallization of aluminum sulfate to explore the basic data for the recovery of aluminum resources from coal spoil. Cooling crystallization process of aluminum sulfate with sodium dodecylbenzenesulfonate (SDBS) was investigated experimentally. The effects of operating conditions, namely rotate speed and cooling rate on the crystal size (Median diameter, D_0.5) were studied. Based on single factor experimental results, the response surface method (RSM) with a Box–Behnken design (BBD) was used to determine the key operating conditions, from which a predictive equation was established to quantitatively describe the relationships of D_0.5 and there relative parameters. The optimum operating conditions for cooling crystallization of aluminum sulfate were as follows: rotate speed of 200–300 rpm, cooling rate of 4–5 °C /min and n (SDBS)/n (Al₂(SO₄)₃) of around 5E‐4. Molecular dynamics (MD) results reveal that SDBS decreases the diffusion coefficient (D) of Al³⁺ molecules, which inhibits nucleation and promotes crystal growth.     

4‐Benzamido‐TEMPO Catalyzed Oxidation of a Broad Range of Alcohols to the Carbonyl Compounds with NaBrO3 under Mild Conditions

4‐Benzamido‐TEMPO catalyzed oxidation system for conversion of a wide range of alcohols to the aldehydes or ketones with NaBrO₃ under room temperature conditions has been developed. The credible, operationally convenient and economical, and condition mild oxidation protocol is particularly of interest in laboratory and in fine chemicals manufacture.     

纳米结构钛酸盐电极快速测定水体COD

分析了纳米结构钛酸盐电极快速测定COD的基本原理及COD标准物质定值方法。通过对纳米结构钛酸盐表征分析,钠型钛酸盐电极具有较高的灵敏度,外加0.7 V工作电位,测定COD溶液标准物质的线性相关系数大于0.995,误差在±8%以内;与国标方法比较,测量同一水样的误差在±15%以内。纳米结构钛酸盐电极可用于测量水体COD。     

Quantum Dot-Catalyzed Photoreductive Removal of Sulfonyl-Based Protecting Groups

This Communication describes the use of CuInS₂/ZnS quantum dots (QDs) as photocatalysts for the reductive deprotection of aryl sulfonyl-protected phenols. For a series of aryl sulfonates with electron-withdrawing substituents, the rate of deprotection for the corresponding phenyl aryl sulfonates increases with decreasing electrochemical potential for the two electron transfers within the catalytic cycle. The rate of deprotection for a substrate that contains a carboxylic acid, a known QD-binding group, is accelerated by more than a factor of ten from that expected from the electrochemical potential for the transformation, a result that suggests that formation of metastable electron donor–acceptor complexes provides a significant kinetic advantage. This deprotection method does not perturb the common NHBoc or toluenesulfonyl protecting groups and, as demonstrated with an estrone substrate, does not perturb proximate ketones, which are generally vulnerable to many chemical reduction methods used for this class of reactions.     

Controlled aging of PbS colloidal quantum dots under mild conditions

A new controlled aging methodology was developed for the synthesis of PbS colloidal quantum dots (QDs), applying larger PbS QDs as a starting material for smaller QDs by application of environmentally friendly oleic acid and oleylamine as reagents. This simple and mild procedure provides a possible strategy for tailoring the size-dependent properties of PbS QDs.     

Quantum Dot‐Catalyzed Photoreductive Removal of Sulfonyl‐Based Protecting Groups

This Communication describes the use of CuInS₂/ZnS quantum dots (QDs) as photocatalysts for the reductive deprotection of aryl sulfonyl‐protected phenols. For a series of aryl sulfonates with electron‐withdrawing substituents, the rate of deprotection for the corresponding phenyl aryl sulfonates increases with decreasing electrochemical potential for the two electron transfers within the catalytic cycle. The rate of deprotection for a substrate that contains a carboxylic acid, a known QD‐binding group, is accelerated by more than a factor of ten from that expected from the electrochemical potential for the transformation, a result that suggests that formation of metastable electron donor–acceptor complexes provides a significant kinetic advantage. This deprotection method does not perturb the common NHBoc or toluenesulfonyl protecting groups and, as demonstrated with an estrone substrate, does not perturb proximate ketones, which are generally vulnerable to many chemical reduction methods used for this class of reactions.     

Nanoparticles from vesicle polymerization: Characterization and kinetic study

The polymerization of isodecyl acrylate (ISODAC) in vesicles made from an anionic surfactant—sodium di-2-ethylhexyl phosphate (SEHP)—and from water is studied by ¹H-NMR, transmission electron microscopy, and quasielastic light scattering. High polymerization rates and high conversion rates are achieved with both water-soluble initiator, K₂S₂O₈ (potassium persulfate), and oil-soluble initiator, AIBN (azoisobisbutyronitrile). ISODAC is probably located inside the vesicle bilayer(s) because of its high hydrophobicity. Particles stable at room temperature with a mean diameter of about 50 nm are obtained. Kinetic orders of ISODAC polymerization are determined and the characterization of the resulting particles during and after polymerization are studied. © 1996 John Wiley & Sons, Inc.