Structural, elastic and thermal properties of the compound LaNi4.5Sn0.5

The equilibrium lattice constants, cell volumes, densities of states and electron density distributions of LaNi_4.5Sn_0.5 crystal are evaluated by the density functional theory using the plane wave pseudopotential (PW-PP) method. The quasi-harmonic Debye model, using a set of total energy versus cell volume obtained from the PW-PP method, is applied to the study of thermal and vibrational effects. We have analyzed the bulk modulus of LaNi_4.5Sn_0.5 as a function of temperature up to 1000 K. The thermodynamic properties such as thermal expansion coefficients and heat capacities are also predicted using the quasi-harmonic Debye model. Significant differences in properties are observed at high temperatures and pressures. Moreover, the Debye temperatures are determined from the non-equilibrium Gibbs functions. The calculated results are in excellent agreement with the available experimental data, and compared favorably with other theoretical results.     

Tune optimization of the third generation light source storage ring based on Frequency Map Analysis

Tune optimization is necessary to optimize the nonlinearity of the third generation light source storage ring. In this paper we summarize the common strategies for choosing a tune and discuss tune op-timization. Frequency Map Analysis (FMA) is applied as a tune scanning tool to reveal information about nonlinear resonances and guide the tune optimization. The Shanghai Synchrotron Radiation Facility (SSRF) storage ring is taken as a test lattice, and the optimum solutions are presented in this paper. Moreover, the third order regular structural resonances excited by sextupoles are particularly investigated, and it is found that these resonances distort the tune shifts with amplitude and show a stop-band like the linear structural resonances.     

夹套冰温库内流场的数值模拟

随着计算机技术的飞速发展,计算流体力学(CFD)越来越广泛地应用于各个领域。通过CFD对复杂流动问题进行研究,能够较精确地反映流场的流动情况。利用CFD技术对夹套冰温库内的流场进行了稳态数值模拟,分析了夹套冰温库内流场的分布情况,讨论了该库体结构下不同送风速度对库内流场均匀性的影响。研究表明,具有夹套结构的冰温库,库内流场分布均匀,采用顶部静压箱送风,底部四周回风的送回风方式,能够使库内形成自上而下的均匀活塞流,不同送风速度对冰温库内流场的影响很小。研究结果证明数值模拟能较好地反映现实情况。     

He-Ne激光辐照铁棍山药贮藏保鲜的研究

用工作波长632.8 nm、功率为2.5 mW的He-Ne激光器辐照铁棍山药,30 min后,其芦头芽萌发受抑,山药茎含水量、可溶性总糖和可溶性蛋白含量分别从70.203 9%下降到66.615 4 4%、从72.213 25 mg·g-1下降到25.878 88 mg·g-1、从508.539 4 μg·g-1下降到258.423 1 μg·g-1,丙二醛(MDA)和超氧阴离子含量分别从0.62 mmol·g-1变为8.033 122 mmol·g-1、从32.997 13 μg·g-1变为35.536 42 μg·g-1,贮藏前期的超氧化物歧化酶(SOD)活性从494.864 U·g-1变为1 105.85 U·g-1,贮藏后期的SOD活性从1 105.85 U·g-1变为959.167 U·g-1.     

番红花红T敏化的新型光致聚合物全息存储材料

制备了一种以番红花红T为光敏剂的新型全息存储材料,实验结果表明,该材料具有较高的衍射效率、曝光灵敏度和较大的折射率调制度等,最大衍射效率约38.5%,折射率调制度为0.547×10－3,在存储介质膜中存储了模拟全息图像,再现图像有较好的保真度,说明该材料适合用作高密度体全息存储介质。     

吖啶橙敏化的光致聚合物及其数字全息存储研究

制备了一种吖啶橙敏化的光致聚合物材料,并研究了材料的全息特性.用Ar+激光器三种波长的光对材料进行记录.结果表明,该材料具有较高的衍射效率、较高的曝光灵敏度和较大的折射率调制度,最大衍射效率均大于40%.将计算机二进制文件经过编码生成的二值图像存入样品,其再现图像较为清晰,译码后能够准确地还原出原文,表明该光致聚合物适合数字全息存储.     

Improved nonlinear optimization in the storage ring of the modern synchrotron radiation light source

In the storage ring of the third generation light sources, nonlinear optimization is an indispensable course in order to obtain ample dynamic acceptances and to reach high injection efficiency and long beam lifetime, especially in a low emittance lattice. An improved optimization algorithm based on the single resonance approach, which takes relative weight and initial Harmonic Sextupole Integral Strength （HSIS） as search variables, is discussed in this paper. Applications of the improved method in several test lattices are presented. Detailed analysis of the storage ring of the Shanghai Synchrotron Radiation Facility （SSRF） is particularly emphasized. Furthermore, cancellation of the driving terms is investigated to reveal the physical mechanism of the harmonic sextupole compensation. Sensitivity to the weight and the initial HSIS as well as dependence of the optimum solution on the convergent factor is analyzed.     

Polarization storage by two-photon-induced anisotropy in bisazobenzene copolymer film

A copolymer containing bisazobenzene chromophores, poly[(methylmethacrylate)-co-4-{(2-methacryloyloxyethyl)oxy}-4′-(4-nitro-phenylazo)azobenzene)] (poly(MMA-co-M2BAN)), was synthesized and used for two-photon-induced polarization storage. Based on two-photon-induced optical anisotropy resulting from photoselective isomerization of bisazochromophores, the data have been recorded by linearly polarized Ti:Sapphire laser (wavelength: 800 nm, pulse duration: 80 fs, and repetition rate: 80 MHz) and read by reflection confocal laser scanning microscope. The recorded bits are dark dots when the polarization of the reading beam is parallel to the recording beam, but the recorded bits become bright dots when the polarization of the reading beam is perpendicular to the recording beam. Two letters can be encoded in the same region of a given layer by separating the two polarization directions of recording beams at an angle of 45°. The relationships between the readout intensity of the recorded bits and the recording power under two different readout modes were investigated and the results showed that there are two opposite change trends for parallel readout and perpendicular readout, respectively, and the readout threshold value is around 12 mW.     

苯亚磺酸钠在聚乙烯醇为粘合剂的光敏热成像材料中的化学增感

以水溶性聚乙烯醇(PVA)为粘合剂,以异位法制备的颗粒尺寸为100nm的AgBr乳剂作光敏元,考察了苯亚磺酸钠(SBS)的用量、增感时间和增感温度对光敏热成像(PTG)材料照相性能的影响.实验结果表明:分别增感硬脂酸银(AgSt)、AgBr或者两者混合物,PTG材料均可取得明显的增感效果;灰雾随着苯亚磺酸钠用量增加而增加;增感温度以及增感时间不同,PTG材料的感光度不同.     

具有存储功能的衍射图像光刻系统的研制

研制了一种在衍射光变图像器件上进行信息存储的新型数字化激光光刻系统。采用空间光调制器作图形自动输入,双远心投影成像系统在光刻记录面上缩微图形。通过光栅干涉光学头对记录面上的微图形进行干涉调制,使微图形上产生干涉条纹,条纹空间频率范围为500-1200lp／mm。在光刻胶干版上的存储实验表明,在衍射光变图像上的单角度存储信息密度大于3．7Mbit／cm^2。改变干涉条纹取向、条纹间隔和需要存储的图形,光刻系统可实现信息的旋转复用存储。上述光刻系统将会在防伪和衍射光变图像器件制造领域有良好应用。