Solutions of alkali soaps and water in fatty acids IX. The location of theL 2-phase in three-component systems of sodium soap — fatty acid — water,in view of the occurrence of acid soaps

Previous studies of the occurrence of acid soaps in systems containing a longchain sodium soap and the corresponding fatty acid, and the study of phase equilibria in the system sodium octanoate — octanoic acid — water, performed by our group at the beginning of the 1960s, show that the isotropic liquidL ₂-phase of the last mentioned system in its whole region of existence is situated in that part in which acid soaps occur. This provides an explanation for the fact that theL ₂-phase itself contains acid sodium octanoates in all regions. TheL ₂-phase has its origin in the water-free melt of fatty acid and neutral soap in which these components react with each other under the formation of an acid soap. When water is added to the system, this water-free acid soap is transformed into different hydrated acid soaps. In a large region of concentration, there is an extremely close relation between theL ₂-phase and the liquid-crystalline lamellarD-phase, which itself consists of hydrated acid soaps. At its outermost water-rich tip, theL ₂-phase is in equilibrium with theL ₁-phase of the system, just above the+LAC, that is, with the most dilute aqueous soap solution in which acid soap still may be formed in aqueous environment. Formation of acid soap is a fundamental requirement for the existence of this isotropic liquidL ₂-phase.     

The influence of activated carbon on the thermal decomposition of sodium ethyl xanthate

The thermal decomposition of SEX in a nitrogen atmosphere was studied by coupled thermogravimetry-Fourier transform infrared spectroscopy (TG-FTIR), and by pyrolysis-gas chromatography-mass spectrometry (py-GC-MS). The TG curve exhibited two discrete mass losses of 45.8% and 17.8% respectively, at 200 and 257–364°C. The evolved gases identified as a result of the first mass loss were carbonyl sulfide (COS), ethanol (C₂H₅OH), ethanethiol (C₂H₅SH), carbon disulfide (CS₂), diethyl sulfide ((C₂H₅)₂S), diethyl carbonate ((C₂H₅O)₂CO), diethyl disulfide ((C₂H₅)₂S₂), and carbonothioic acid, O, S, diethyl ester ((C₂H₅S)(C₂H₅O)CO). The gases identified as a result of the second mass loss were carbonyl sulfide, ethanethiol, and carbon disulfide. Hydrogen sulfide was detected in both mass losses by py-GC-MS, but not detected by FTIR. The solid residue was sodium hydrogen sulfide (NaSH).SEX was adsorbed onto activated carbon, and heated in nitrogen. Two discrete mass losses were still observed, but in the temperature ranges 100–186°C (7.8%) and 186–279°C (11.8%). Carbonyl sulfide and carbon disulfide were now the dominant gases evolved in each of the mass losses, and the other gaseous products were relatively minor. It was demonstrated that water adsorbed on the carbon hydrolysed the xanthate to cause the first mass loss, and any unhydrolysed material decomposed to give the second mass loss.Mr. N. G. Fisher would like to thank the A. J. Parker CRC for Hydrometallurgy for the provision of a PhD scholarship.     

Structural difference between a superconducting sodium cobalt oxide and its related phase

Monolayer hydrate (MLH) Na_xCoO₂·y′H₂O was obtained from superconducting bilayer hydrate (BLH) Na_xCoO₂·yH₂O by partial extraction of H₂O molecules between the CoO₂ layers. Magnetization measurements indicated that electron densities in the CoO₂ layer of the MLH phase remained unchanged after the water extraction. Nevertheless, superconductivity was completely suppressed in the MLH phase. This strongly suggests that the highly 2D nature in the BLH phase due to its thick insulating layers consisting of H₂O molecules and Na⁺ ions plays an important role for inducing superconductivity.     

The Additive Influence of Propane-1,2-Diol on SDS Micellar Structure and Properties

Micellar systems are colloids with significant properties for pharmaceutical and food applications. They can be used to formulate thermodynamically stable mixtures to solubilize hydrophobic food-related substances. Furthermore, micellar formation is a complex process in which a variety of intermolecular interactions determine the course of formation and most important are the hydrophobic and hydrophilic interactions between surfactant–solvent and solvent–solvent. Glycols are organic compounds that belong to the group of alcohols. Among them, propane-1,2-diol (PG) is a substance commonly used as a food additive or ingredient in many cosmetic and hygiene products. The nature of the additive influences the micellar structure and properties of sodium dodecyl sulfate (SDS). When increasing the mass fraction of propane-1,2-diol in binary mixtures, the c.m.c. values decrease because propane-1,2-diol is a polar solvent, which gives it the ability to form hydrogen bonds, decreasing the cohesivity of water and reducing the dielectric constant of the aqueous phase. The values of ΔGm0 are negative in all mixed solvents according to the reduction in solvophobic interactions and increase in electrostatic interaction. With the rising concentration of cosolvent, the equilibrium between cosolvent in bulk solution and in the formed micelles is on the side of micelles, leading to the formation of micelles at a lower concentration with a small change in micellar size. According to the ¹H NMR, with the addition of propylene glycol, there is a slight shift of SDS peaks towards lower ppm regions in comparison to the D₂O peak. The shift is more evident with the increase in the amount of added propane-1,2-diol in comparison to the NMR spectra of pure SDS. Addition of propane-1,2-diol causes the upfield shift of the protons associated with hydrophilic groups, causing the shielding effect. This signifies that the alcohol is linked with the polar head groups of SDS due to its proximity to the SDS molecules.     

Solubilization of methane,ethane, propane andn-butane in aqueous solutions of sodium dodecylsulfate

The solubilities of methane, ethane, propane, and n-butane were measured in aqueous solutions of sodium dodecylsulfate (NaDS) (0–0.1M) from 15 to 27°C. From these measurements the standard Gibbs energies, entropies, and enthalpies for the process of transferring the solute molecules from the gaseous phase into the solutions were calculated. An approximate relationship was found relating the volume fraction of the micelles to NaDS concentration.     

Reduction of nitrates,the no donors,by hemoglobin in the presence of cysteine

Hemoglobin (Hb) reduces 3,3-bis(nitroxymethyl)oxetane (NMO) only in the presence of cysteine (Cys) via intermediate cysteine thionitrate. The kinetics of the reaction of NMO with Cys and the kinetics and mechanism of formation of NO in the ternary system Hb-NMO-Cys were studied. The formation rate of Hb-NO in the ternary system is higher than that of Hb-NO in the reaction of Hb only with NO ₂ ⁻ generated in the binary system NMO-Cys. The second-order rate constants of the main reaction steps in the system Hb-NMO-Cys were estimated by simulating the kinetics of the reactions with a system of equations taking into account equilibria between all components of the reaction mixture. Hemoglobin reduces cysteine thionitrate, the intermediate in the reaction of NMO with Cys, to NO. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 4, pp. 725–731, April, 2007.     

水／AOT／正庚烷微乳体系中磺酸根水化作用的FT—IR研究

运用傅立叶变换红外光谱（FT－IR）对水／琥珀酸（乙基已基）磺酸钠（AOT）／正庚烷微乳体系中磺酸根的水化作用进行了研究．由于微乳体系中水分子与表面活性剂分子的相互作用，S＝O对称伸缩振动的红外吸收峰向低频方向移动．体系中的加水量W0（水与AOT的摩尔比）由0.5增大至25时，磺酸根对称伸缩振动的红外吸收峰由1051．39cm－1向低频移动至1046．15cm－1．同时，由于Na 的不对称作用，AOT分子中磺酸根反对称伸缩振动分裂成两个吸收峰，分别位于正215cm-1及1245cm－1附近，两个劈裂峰的距离及各自的峰面积均随体系中加水量的变化而变化，应用二阶导数、傅立叶退卷积及曲线拟会等分辨率增强技术可更清楚地反映出这个二重峰的变化情况．固体AOT分子中碳酸根反对称伸缩振动分裂的两个峰之间频率的差值约为42cm－1，形成微乳液以后，这两个峰的差值变小，W0为20时，这两个峰频率的差值逐渐减小到29cm-1，这些变化与磺酸根的水化程度直接相关     

The microstructure and optical transmittance thermal analysis of sodium borosilicate bio-glasses

The conditions to fabricate the bulk porous specimens have been studied on account of sodium borosilicate (NBS) glasses. Glass composition, heat treatment at phase separation and TiO₂ addition have been considered in this study. Original glass samples of composition in mol%: sample A: 9.19 Na₂O - 23.58 B₂O₃ - 67.23 SiO₂, sample B: 9.29 Na₂O - 3.17 TiO₂ - 23.82 B₂O₃ - 63.72 SiO₂ were prepared by melting reagent grade chemicals (Na₂CO₃, HBO₃, SiO₂ and AgNO₃) in platinum crucibles at 1480°C for 1 h in air. The melts were poured onto stainless steel plates and were annealed at 500°C for 0.5 h after cooling. Thus, obtained samples were phase separated at 700°C for 2, 15, 25 and 50 h to study their microstructure by scanning electron microscope (SEM). Besides the direct study of the microstructure by SEM, information on glass structural changes of samples are provided by measuring in situ changes by the optical transmittance thermal analysis. The isothermal measurements were carried out at 700, 720 and 740°C. The temperature of phase separation, the leaching and nucleator addition (TiO₂), significantly influence the microstructure of the resulting leached product. TiO₂ additive seems to suppress crystallization of cristobalite: especially at the extended above heat treatment phase separation runs. The phase-separated domains of glasses containing above 80 moles of SiO₂ are so small that it is very hard to observe them by SEM. The glass composition in our case was selected in a way to have relatively large phase separated areas easily observed by SEM at magnification 20 000·. The influence of TiO₂ is not too pronounced. It seems to suppress the cristobalite crystallization, especially of longer heating runs. The image analysis of leached glasses shows the prevailing content of the skeletal phase in a comparison to pores. The TiO₂ content diminishes the content of the skeletal phase. This revised version was published online in July 2006 with corrections to the Cover Date.     

单扫描示波极谱法测定扑热息痛

扑热息痛与NaNO2在中性介质中发生反应，其亚硝化衍生物具有良好的电活性。在pH9．37的Britton-Robinson缓冲溶液中，于-0．56V(vs．SCE)产生灵敏的极谱还原峰，峰电流与扑热息痛质量浓度在0．007-0．4mg/L范围有良好的线性关系，检测下限为5μg/L。此法已用于测定小儿速效感冒灵。     

A study for quality evaluation of Taxilli Herba from different hosts based on fingerprint-activity relationship modeling and multivariate statistical analysis

In this study, a fingerprint-activity relationship modeling between chemical fingerprints and antirheumatic activity was established, and multivariate statistical analysis was used to evaluate the quality of Taxilli Herba (TH) from different hosts. Characteristic fingerprints of 20 batches of TH samples were generated by high-performance liquid chromatography coupled with triple quadrupole-time of flight tandem mass spectrometry (HPLC-Triple TOF-MS/MS), and the similarity analysis was calculated based on thirteen common characteristic peaks by hierarchical clustering analysis (HCA). Subsequently, nine efficacy markers were discovered by combining fingerprints and antirheumatic activity through grey correlation analysis (GCA) and bivariate correlation analysis (BCA). Meanwhile, the content of 5 constituents in 9 markers was determined by high-performance liquid chromatography coupled with triple quadrupole-linear ion trap tandem mass spectrometry (HPLC-QTRAP-MS/MS). The comprehensive quality of TH was assessed using multivariate statistical analysis, including principal components analysis (PCA) and technique for order preference by similarity to ideal solution (TOPSIS). The results showed that a high dose of TH extract could markedly ameliorate arthritis damage compared to other doses, with flavonoids playing an important role in the antirheumatic activity. The comprehensive quality of samples from Morus alba L. (SS) was superior to those from Liquidambar formosana Hance (FXS). The present study will demonstrate the markers associated with efficacy, and provide an applicable strategy for more comprehensive quality control and evaluation of TH.