Cooling crystallization of aluminum sulfate in pure water modulated by sodium dodecylbenzenesulfonate

This study investigated the cooling crystallization of aluminum sulfate to explore the basic data for the recovery of aluminum resources from coal spoil. Cooling crystallization process of aluminum sulfate with sodium dodecylbenzenesulfonate (SDBS) was investigated experimentally. The effects of operating conditions, namely rotate speed and cooling rate on the crystal size (Median diameter, D_0.5) were studied. Based on single factor experimental results, the response surface method (RSM) with a Box–Behnken design (BBD) was used to determine the key operating conditions, from which a predictive equation was established to quantitatively describe the relationships of D_0.5 and there relative parameters. The optimum operating conditions for cooling crystallization of aluminum sulfate were as follows: rotate speed of 200–300 rpm, cooling rate of 4–5 °C /min and n (SDBS)/n (Al₂(SO₄)₃) of around 5E‐4. Molecular dynamics (MD) results reveal that SDBS decreases the diffusion coefficient (D) of Al³⁺ molecules, which inhibits nucleation and promotes crystal growth.     

4‐Benzamido‐TEMPO Catalyzed Oxidation of a Broad Range of Alcohols to the Carbonyl Compounds with NaBrO3 under Mild Conditions

4‐Benzamido‐TEMPO catalyzed oxidation system for conversion of a wide range of alcohols to the aldehydes or ketones with NaBrO₃ under room temperature conditions has been developed. The credible, operationally convenient and economical, and condition mild oxidation protocol is particularly of interest in laboratory and in fine chemicals manufacture.     

纳米结构钛酸盐电极快速测定水体COD

分析了纳米结构钛酸盐电极快速测定COD的基本原理及COD标准物质定值方法。通过对纳米结构钛酸盐表征分析,钠型钛酸盐电极具有较高的灵敏度,外加0.7 V工作电位,测定COD溶液标准物质的线性相关系数大于0.995,误差在±8%以内;与国标方法比较,测量同一水样的误差在±15%以内。纳米结构钛酸盐电极可用于测量水体COD。     

Nanoparticles from vesicle polymerization: Characterization and kinetic study

The polymerization of isodecyl acrylate (ISODAC) in vesicles made from an anionic surfactant—sodium di-2-ethylhexyl phosphate (SEHP)—and from water is studied by ¹H-NMR, transmission electron microscopy, and quasielastic light scattering. High polymerization rates and high conversion rates are achieved with both water-soluble initiator, K₂S₂O₈ (potassium persulfate), and oil-soluble initiator, AIBN (azoisobisbutyronitrile). ISODAC is probably located inside the vesicle bilayer(s) because of its high hydrophobicity. Particles stable at room temperature with a mean diameter of about 50 nm are obtained. Kinetic orders of ISODAC polymerization are determined and the characterization of the resulting particles during and after polymerization are studied. © 1996 John Wiley & Sons, Inc.     

Ultrasound wave assisted removal of Ceftriaxone sodium in aqueous media with novel nano composite g-C3N4/MWCNT/Bi2WO6 based on CCD-RSM model

The aim of this study was ultrasound assisted removal of Ceftriaxone sodium (CS) based on CCD model. Using sonochemical synthesized Bi₂WO₆ implanted on graphitic carbon nitride/Multiwall carbon nanotube (g-C₃N₄/MWCNT/Bi₂WO₆). For this purpose g-C₃N₄/MWCNT/Bi₂WO₆ was synthesized and characterized using diverse approaches including XRD, FE-SEM, XPS, EDS, HRTEM, FT-IR. Then, the contribution of conventional variables including pH, CS concentration, adsorbent dosage and ultrasound contact time were studied by central composite design (CCD) under response surface methodology (RSM). ANOVA was employed to the variable factors, and the most desirable operational conditions mass provided. Drug adsorption yield of 98.85% obtained under these defined conditions. Through conducting five experiments, the proper prediction of the optimum point were examined. The respective results showed that RSD% was lower than 5% while the t-test confirmed the high quality of fitting. Langmuir isotherm equation fits the experimental data best and the removal followed pseudo-second order kinetics. The estimation of the experimentally obtained maximum adsorption capacities was 19.57 mg.g⁻ of g-C₃N₄/MWCNT/Bi₂WO₆ for CS. Boundary layer diffusion explained the mechanism of removal via intraparticle diffusion.     

钡-聚乙二醇600-四苯硼钠三元体系中痕量钡的光散射法测定

钡;聚乙二醇600;四苯硼钠;光散射分析法     

敬钊毒素-V剪切体Y1-JZTX-V的化学合成与氧化复性及其钠通道活性鉴定

应用芴甲氧羰基(Fmoc)固相方法化学合成了敬钊毒素-V（JZTX-V）分子N-端酪氨酸残基剪切体(Y1-JZTX-V),并且通过反相高效液相色谱和质谱对不同条件下的氧化复性结果进行监测,从而得到该剪切体的最佳氧化复性条件:0.1 mol/L Tris-HCl缓冲液、pH 7.50、1 mmol/L还原型谷胱甘肽(GSH)、0.1 mmol/L氧化型谷胱甘肽(GSSG)、样品浓度为0.05 mg/L、复性温度为4 ℃。膜片钳电生理实验结果显示敬钊毒素-V剪切体Y1-JZTX-V对大鼠背根神经节(DRG)细胞上表达的河豚毒素不敏感型(TTX-R)与河豚毒素敏感型(TTX-S)钠电流均有抑制作用,其半数抑制浓度(IC50)分别为(160±2.5) nmol/L和(39.6±3.2) nmol/L。与天然的敬钊毒素-V相比,该剪切体对大鼠DRG细胞上的TTX-S钠电流的抑制作用基本一致,但对TTX-R钠电流的抑制作用却大大降低,表明敬钊毒素-V分子N-端的酪氨酸残基是一个与TTX-R钠通道结合活性相关的氨基酸残基。     

HPLC法测定鸡精中谷氨酸钠的含量

以邻苯二甲醛与谷氨酸钠中的氨基进行柱前在线衍生化反应,采用C18色谱柱分离、荧光检测器（激发340nm,发射450nm）进行测定,建立了柱前衍生反相高效液相色谱测定鸡精中谷氨酸钠含量的方法。该方法相对标准偏差为0．69％,加标回收率为99．1％～101％,在0．10~50．0mg／L范围内,谷氨酸钠的峰面积和浓度之间的相关系数为0．9999,保留时间和峰面积的相对标准偏差分别为1．22％和0．71％,鸡精中谷氨酸钠定量下限为0．2μg／g。     

Theoretical studies on the infrared spectrum of the tetrahedral molecules R<Subscript>2</Subscript>MH<Subscript>2</Subscript> (R = D(H), CH<Subscript>3</Subscript>, OH; M = Ti,Zr, Hf)

Using Stuttgart/Dresden effective core potentials MWB28, MWB60, and GTO valence basis sets (8s7p6d)/[6s5p3d], (8s7p6d)/[6s5p3d] for Zr and Hf atoms and 6-311++G(3df,3pd) basis set for C, H, O, and Ti atoms, tight convergence criteria geometry optimizations and harmonic frequency calculations are performed at B3LYP and B3LYP/IEF-PCM levels of theory so as to model the gas phase and argon matrix infrared spectra of the tetrahedral molecules R₂MH₂ (R = D(H), CH₃, OH; M = Ti, Zr, Hf). Influence of the transition metal and/or substituent group on the symmetric and asymmetric stretching frequencies of the MH₂ fragment of the R₂MH₂ molecules is investigated at both the levels of theory. The modelling of the argon matrix effect improves the agreement between the calculated frequencies and the experimental ones. The calculated argon matrix to gas phase frequency shifts is compared reasonably to the experimental argon to neon matrix shifts.