Samarium(II) iodide reduction of isoxazolidines

SmI₂ was used as reducing agent for the N-O bond cleavage in isoxazolidines. The procedure revealed is general and particularly useful for the transformation of 5-spirocyclopropane isoxazolidines to the corresponding β-aminocyclopropanols, a troublesome transformation with other known reagents.     

Post‐Treatment of CH3NH3PbI3/PbI2 Composite Films with Methylamine to Realize High‐Performance Photoconductor Devices

Organometallic halide perovskites have attracted great research interest as light‐active materials for use in optoelectronics. Here, we report a high‐performance photoconductor based on a methylammonium lead iodide (MAPbI₃) film that was prepared from a methylamine‐treated MAPbI₃/PbI₂ perovskite film. An ultrahigh responsivity of 3.6 A W^?1 and detectivity of 5.4×10¹² Jones were obtained for the film under 0.5 mW cm^?2 white‐light illumination. In addition, under 420 nm light irradiation, the film exhibited its highest responsivity and detectivity of 30 A W^?1 and 2.4×10¹⁴ Jones, respectively. The excellent photo‐response performance results from the improved electronic quality and suppressed nonradiative recombination channels of the treated perovskite thin film.     

Preparation and properties of water‐absorbent composites of chloroprene rubber,starch, and sodium acrylate

The effects of the amounts of starch, sodium acrylate (NaAA) and dicumyl peroxide (DCP) on the properties of chloroprene rubber (CR)/starch/NaAA composites prepared by melting method were investigated. The results showed that the addition of starch improved the mechanical properties, but decreased the water‐absorbing capacity of the composite, most likely due to the decrease in the local concentration of the main water‐absorbing material sodium polyacrylate and the increase in crosslinking density of the composite resulting from the reaction between starch and CR. This reaction was verified by the vulcanized curves, DSC curves, and the cut surface morphology. The as‐prepared composite demonstrated higher water‐absorbing capacity, resulting from the incorporation of NaAA. The mechanical properties decreased with increasing the DCP loading, and the water‐absorbing ratio is the maximum at 1.0 phr DCP. The tensile strength of the composite decreased significantly after water immersion, due to the absorbed water acting as a plasticizer. The extracted component from composites after water immersion is mainly sodium polyacrylate according to Fourier transform infrared (FT‐IR) spectroscopy analysis. The morphology of the composites before and after water immersion was observed by optical transmission microscopy (OTM). The results indicated that the starch exhibits a good dispersion state, and the water‐absorbing capacity results primarily from sodium polyacrylate. Copyright © 2010 John Wiley & Sons, Ltd.     

Enthalpies of dilution of electrolyte solutions by flow microcalorimetry

The enthalpies of dilution of NaCl, Me₄NBr, andn-Bu₄NBr were measured in water at 25°C with a new flow microcalorimeter. The data were analyzed with a polynomial equation, and the derived relative apparent molal enthalpies _L are in good agreement with literature values. Provided care is taken that mixing is complete, flow calorimeters are as reliable and much less time-consuming than cell-type instruments for enthalpies of dilution measurements.     

Sodiation of Arenes and Heteroarenes in Continuous Flow

The first sodiations of (hetero)arenes in continuous flow using NaDA (sodium diisopropylamide) in Me₂EtN are reported. This flow procedure enables sodiation of functionalized arenes and heteroarenes that decompose under batch‐sodiation conditions. The resulting sodiated (hetero)arenes react instantly with various electrophiles, such as ketones, aldehydes, isocyanates, alkyl bromides, and disulfides, affording polyfunctionalized (hetero)arenes in high yields. Scale‐up is possible without further optimization.     

Physicochemical properties of sodium succinate sulfate and effects on BaSO4 suspension

Sodium succinate sulfate (MAPEG1500-OSO₃Na) was prepared using maleic anhydride (MA) and polyethylene glycols (PEG1500) as raw materials. The structure was characterized by Fourier transform infrared spectrometry (FTIR) and ¹H-nuclear magnetic resonance (¹H NMR). Its physicochemical properties, such as surface activity, adsorption behavior, spreading performance, and rheological property, were investigated by static/dynamic surface tension (DST) measurements, contact angle techniques, and rheological techniques at 25°C. Surface tension measurement for this surfactant is about 17?mN/m. The DST results indicated that the adsorption process is mixed diffusion-kinetic adsorption mechanism. The spreading measurement demonstrated that MAPEG1500-OSO₃Na possessed an excellent spreading ability. Besides, the dispersion performances of MAPEG1500-OSO₃Na on barium sulfate (BaSO₄) particles under different conditions have been studied by the weighing method and transmission electron microscope (TEM). These results showed that there exist optimum pH value and added amount of MAPEG1500-OSO₃Na corresponding to the highest dispersion rate.     

一种高效、绿色制备环状硫碘盐的新方法及其在染料敏化太阳电池中的应用

采用高压釜合成和乙酸乙酯/水萃取提纯的模式制备出高产率、高纯度的环状烷基硫碘盐. 高压釜合成在保证产率的前提下, 大大缩短了反应时间(反应时间仅为原来的1/3)|乙酸乙酯和水的萃取提纯模式在保证产品纯度的同时, 大大缩短了提纯时间, 还避免了有毒试剂的使用. 制备出的烷基环状硫碘盐作为碘源用于配制染料敏化太阳电池用电解质, 相应电池的光电转化效率接近使用传统烷基咪唑碘盐的电池. 电化学阻抗谱(EIS)测试表明环状烷基锍阳离子相比于烷基咪唑阳离子来说, 更有利于抑制电池内部的电子复合反应, 同时还能促进对电极上电子交换反应的进行, 最终可以提高电池的开路电压和填充因子.     

基于金属有机框架水凝胶的一步式快速富集检测养殖水体中孔雀石绿北大核心CSCD

孔雀石绿是一种三苯甲烷类化合物,在水产品饲养中对疾病的防治有着不错的疗效,但因对人体健康有危害而被列为禁用药。由于实际样品中成分复杂,对于此类染料的检测方法难以同时兼具富集性好、灵敏度高且方便快速的优点。该工作制备了金属有机框架材料(MOF),采用MOF纳米材料掺杂的水凝胶(PAAM-SA/MOF)对养殖水体中的孔雀石绿进行吸附研究。采用一系列表征手段对MOF、PAAM-SA和PAAM-SA/MOF的微观形貌进行分析,结果表明吸附材料已成功合成。通过优化水凝胶吸附剂用量、吸附时间、孔雀石绿溶液pH、吸附温度、孔雀石绿溶液初始浓度等吸附萃取条件,使溶液中的孔雀石绿基本完全吸附在水凝胶中,在最优条件下,吸附效率最高可达97%。此外,采用不同极性的有机溶剂对吸附的孔雀石绿进行洗脱,通过优化洗脱液体积,脱附率最高达99%。在最佳条件下,该方法在高、中、低3个水平下的样品加标回收试验中回收率达到84.8%~118.1%,相对标准偏差小于5.1%,方法的检出限为0.083μg/L(S/N=3),定量限为0.25μg/L(S/N=10)。该方法简化了前处理过程,结合了MOF和水凝胶这二者各自的优点,添加的MOF材料可以在水凝胶体系中发挥其良好的吸附性,既解决了传统的MOF材料因粒径太小而回收率低的难题,便于吸附后直接提取,同时也解决了纯水凝胶吸附效率较低的问题,整体上提高了吸附效率和可回收性。实际样品测试表明该新型水凝胶吸附材料可用于养殖水体中孔雀石绿的快速萃取和检测,在食品检测领域具有很大潜力。     

A study for quality evaluation of Taxilli Herba from different hosts based on fingerprint-activity relationship modeling and multivariate statistical analysis

In this study, a fingerprint-activity relationship modeling between chemical fingerprints and antirheumatic activity was established, and multivariate statistical analysis was used to evaluate the quality of Taxilli Herba (TH) from different hosts. Characteristic fingerprints of 20 batches of TH samples were generated by high-performance liquid chromatography coupled with triple quadrupole-time of flight tandem mass spectrometry (HPLC-Triple TOF-MS/MS), and the similarity analysis was calculated based on thirteen common characteristic peaks by hierarchical clustering analysis (HCA). Subsequently, nine efficacy markers were discovered by combining fingerprints and antirheumatic activity through grey correlation analysis (GCA) and bivariate correlation analysis (BCA). Meanwhile, the content of 5 constituents in 9 markers was determined by high-performance liquid chromatography coupled with triple quadrupole-linear ion trap tandem mass spectrometry (HPLC-QTRAP-MS/MS). The comprehensive quality of TH was assessed using multivariate statistical analysis, including principal components analysis (PCA) and technique for order preference by similarity to ideal solution (TOPSIS). The results showed that a high dose of TH extract could markedly ameliorate arthritis damage compared to other doses, with flavonoids playing an important role in the antirheumatic activity. The comprehensive quality of samples from Morus alba L. (SS) was superior to those from Liquidambar formosana Hance (FXS). The present study will demonstrate the markers associated with efficacy, and provide an applicable strategy for more comprehensive quality control and evaluation of TH.     

指向学习体验的物质及其转化复习的教学实践——以“钠及其化合物”为例

学习体验是学生对学习内容、过程、方法、意义的自我感受和评估,对学生学习志趣、学习素养提升有积极正向作用。以钠及其化合物复习为例,将各类别物质间转化关系的构建、物质制备原理和条件的优选作为学习体验对象,依据学习体验的内在发展历程设计学习任务及活动,引导学生亲身体验学科认知方式、学科思维方法、学科应用价值,评价体验结果,激励学生自主学习发生。