智能结构中光纤智能夹层力学特性的实验研究

根据光纤自诊断系统模块化、集成化要求,制作出光纤智能夹层,它可以铺设于复合材料结构表面或埋入复合材料结构内部。对智能夹层试件的轴向拉伸试验和层间拉伸试验表明,光纤智能夹层的埋入对复合材料结构的强度性能无显著影响,可以埋入复合材料结构内部并实施健康监测。试验还表明,在一定应变范围内,单膜交错光纤中光强—应变之间具有良好的线性关系,可以在埋入复合材料之前进行标定。     

Experimental verification of drop/impact simulation for a cellular phone

Conducting drop tests to investigate impact behavior and identify failure mechanisms of small-size electronic products is generally expensive and time-consuming. Nevertheless, strict drop/impact performance criteria for hand-held electronic products such as cellular phones play a decisive role in the design because they must withstand unexpected shocks. The design of product durability on impact has heavily relied on the designer's intuition and experience. In this study, a reliable drop/impact simulation for a cellular phone is carried out using the explicit code LS-DYNA. Subsequently globallocal experimental verification is accomplished by means of high-speed photography and impact response measurement. Using this methodology, we predict potential damage locations in a cellular phone and compare them with real statistical data. It is envisaged that development of a reliable methodology of drop/impact simulation will provide us with a powerful and efficient vehicle for improvement of the design quality and reduction of the product development cycle.     

LINEAR ACTIVE STRUCTURES AND MODES (Ⅰ)--BASIC CONCEPTS AND PROPERTIES

Some basic concepts about the active structures were firstly explained, and the main subjects to study in the field of active structure dynamics were synthesized. For the linear active structures, the annotations on the modes were done in detail. The physical meanings of the right and left eigenvectors were explained. The right eigenvectors are the modal shapes and the modal responses of an active structure depend on the left ones. The adjoint structure of an active structure was defined and the reciprocity theorem was interpreted. For two active structures, which are adjoint to each other and with the reciprocal gain-matrices, the right and left eigenvector are reciprocal. The relationship between an active structure and the corresponding passive structure is expressed with the transfer functions, which is employed to resolve the estimation problems.     

智能板模态传感与控制的数值分析

智能结构技术对空间大型柔性结构 振动控制问题具有重要意义,采用独立模态空间控制技术对压电智能板进行主动振动控制是一种常用方法,以前对这一问题的研究仅限于解析的方法,本文采用有限单元法,设计了新的压电模态传感器与致动器,该方法能够适用于形状及边界条件较为复杂的智能板,算例分析证明了该方法的正确性。     

热和机械载荷共同作用下涂层特性对埋入式光纤传感器性能的影响

研究在热载及拉伸共同作用下，光纤传感器涂层的材料特性和厚度变化对光纤－涂层－基体基体性能的影响，分析表明在埋入式光纤附近的应力集中涂层的特性有关。在热应力和机械应力共同作用下，对于给定的基体材料和裸光纤，存在可减少基体，涂层与裸光纤之间或裸光纤中应力集中的涂层性能和尺寸的最优组合。     

热压电变分原理

热释电介的许多传感器及机敏结构或中的关键材料，本文系统地讨论了在基础理论和数值计算中极具重要地位的各类变分原理，包括准静态变分原理、动态变分原理和关于固有频率的变分原理。最后建立了关于静态压电要板的变分原理，并由此导出了各向异性压电板的控制方程及边界条件。     

一个安全有效的智能卡远程用户认证方案

2000年,Hwang和Li提出了一个新的智能卡远程用户认证方案,随后Chan和Cheng对该方案进行了成功的攻击.最近Shen,Lin和Hwang针对该方案提出了一种不同的攻击方法,并提供了一个改进方案用于抵御这些攻击.2003年,Leung等认为Shen-Lin-Hwang改进方案仍然不能抵御Chan和Cheng的攻击,他们用改进后的Chang-Hwang攻击方法进行了攻击.文中主要在Hwang-Li方案的基础上,提出了一个新的远程用户认证方案,该方案主要在注册阶段和登录阶段加强了安全性,抵御了类似Chan-Cheng和Chang-Hwang的攻击.     

Design and Fabrication of Composite Smart Structures with High Electric and Mechanical Performances for Future Mobile Communication

In this paper, we have developed a load-bearing outer skin for antennas, which is termed a composite smart structure (CSS). The CSS is a multilayer composite sandwich structure in which antenna layers are inserted. A direct-feed stacked patch antenna is considered. A design procedure including the structure design, material selection, and design of antenna elements in order to obtain high electric and mechanical performances is presented. An optimized honeycomb thickness is selected for efficient radiation and impedance characteristics. High gain conditions can be obtained by placing the outer facesheet in the resonance position, which is at about a half wavelength distance from the ground plane. The measured electrical performances show that the CSS has a great bandwidth (over 10%) and a higher gain than an antenna without a facesheet and has excellent mechanical performances, owing to the composite laminates and honeycomb cores. The CSS concept can be extended to give a useful guide for manufacturers of structural body panels and for antenna designers.     

Thermoresponsive hydrogel of poly(glycidyl methacrylate‐co‐N‐isopropylacrylamide) as a nanoreactor of gold nanoparticles

The synthesis of a thermoresponsive hydrogel of poly(glycidyl methacrylate‐co‐N‐isopropylacrylamide) (PGMA‐co‐PNIPAM) and its application as a nanoreactor of gold nanoparticles are studied. The thermoresponsive copolymer of PGMA‐co‐PNIPAM is first synthesized by the copolymerization of glycidyl methacrylate and N‐isopropylacrylamide using 2,2′‐azobis(isobutyronitrile) as an initiator in tetrahydrofuran at 70 °C and then crosslinked with diethylenetriamine to form a thermoresponsive hydrogel. The lower critical solution temperature (LCST) of the thermoresponsive hydrogel is about 50 °C. The hydrogel exists as 280‐nm spheres below the LCST. The diameter of the spherical hydrogel gradually decreases to a minimum constant of 113 nm when the temperature increases to 75 °C. The hydrogel can act as a nanoreactor of gold nanoparticles because of the coordination of nitrogen atoms of the crosslinker with gold ions, on which a hydrogel/gold nanocomposite is synthesized. The LCST of the resultant hydrogel/gold nanocomposite is similar to that of the hydrogel. The size of the resultant gold nanoparticles is about 15 nm. The hydrogel/gold nanocomposite can act as a smart and recyclable catalyst. At a temperature below the LCST, the thermoresponsive nanocomposite is a homogeneous and efficient catalyst, whereas at a temperature above the LCST, it becomes a heterogeneous one, and its catalytic activity greatly decreases. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2812–2819, 2007     

Synthesis,Thermal Properties,and Thermoresponsive Behaviors of Cyclic Poly(2‐(dimethylamino)ethyl Methacrylate)s

This study aims at physicochemical properties of thermo‐ and pH/CO₂‐responsive cyclic homopolymers. Three examples of cyclic poly(2‐(dimethylamino)ethyl methacrylate)s (PDMAs) are synthesized by combining the reversible addition–fragmentation chain transfer process and the Diels–Alder ring‐closure reaction. After cyclization, the glass transition temperature significantly increases (ΔT_g = 51.8–59.7 °C) due to the different configurational entropy and end groups, and the maximum decomposition temperature to lose the pendent groups is drastically decreased from 309 to 278 °C. Effects of polymerization degree, polymer concentration, additive of NaCl, and pH/CO₂ on lower critical solution temperature behaviors of PDMA aqueous solutions are investigated. The cloud points (T_c) of ring PDMAs are usually higher than their linear precursors, and the ΔT_c values obtained under a fixed condition can reach up to 20.7 °C, revealing the crucial role of the topology effect. This study paves the way for unique properties and applications of smart cyclic polymers and their derivatives.