Influence of chemistry and hot rolling conditions on high permeability non-grain oriented silicon steel

This paper discusses the influence of chemical composition on the final electromagnetic properties in higher permeability material. Furthermore, the effect of the hot rolling practice and the end of austenite transformation temperature range on the hot band microstructure is described. The magnetic polarization J₅₀₀₀ better than 1.7 T, using hot rolling conditions 40 mm transfer bar thickness, finish mill entry temperature 1000 °C, and finishing temperature 800–840 °C and after decarburization heat treatment and grain growth treatment, was obtained.     

Photon interaction studies using 241Am γ-rays

We have carried out some photon interaction measurements using 59.54 keV γ-rays from a ²⁴¹Am source. These include γ attenuation studies as well as photoelectric absorption studies in various samples. The attenuation studies have been made using leaf and wood samples, samples like sand, sugar etc., which contain particles of varying sizes as well as pellets and aqueous solutions of rare earth compounds. In the case of the leaf and wood samples, we have used the γ-ray attenuation technique for the determination of the water content in fresh and dried samples. The variation of the attenuation coefficient with particle size has been investigated for sand and sugar samples. The attenuation studies as well as the photoelectric studies in the case of rare earth elements have been carried out on samples containing such elements whose K-absorption edge energies lie below and close to the γ-energy used. Suitable compounds of the rare earth elements have been chosen as mixture absorbers in these investigations. A narrow beam good geometry set-up was used for the attenuation measurements. A well-shielded scattering geometry was used for the photoelectric measurements. The mixture rule was invoked to extract the values of the mass attenuation coefficients for the elements from those of the corresponding compounds. The results are consistent with theoretical values derived from the XCOM package.     

Circuit-switching networks with FIFO plus justifying blockout service on infinite graphs

A class of circuit-switching open queueing networks is discussed. The main result of the paper is that if extra message flows are not too intensive and the path distribution is mainly concentrated on the paths of (graph) distance 1 (nearest neighbour connections), then the network has a unique stationary working regime, no matter how large the configuration graph of the network is. Standard properties of this regime are established such as decay of correlation and continuity.     

Size distribution of fractured areas in one-dimensional systems

We study a one-dimensional model for fracture, identifying fractured areas with intervals on which a stress field exceeds a threshold value. When is a diffusion process, the cumulative numberN(l) of fractured areas whose length is greater thanl obeys a power lawCl ^–p asl0 with probability one. The exponentp and the constantC are determined. The exponentp agrees with the Hausdorff dimension of the end points of fractured areas, i.e., ^–1(). Even if is self-similar with parameterH>0, i.e.,(cx)– is equivalent toc ^H {(x)–} for anyc>0, the exponentp does not depend solely onH;p=H, where(0, 1/H) is another parameter characterizing. Non-diffusion processes are given whereN(l) does not follow a power law.     

粒径和流速对吸附速率的影响

本文主要考察了吸附剂的粒径大小及动态循环时流速大小对吸附速率的影响，根据膜扩散限制和孔隙扩散限制的理论模型对其影响作了定量描述。     

WS2 超细粉体的固相法合成

WS2 超细粉体的固相法合成;WS2;固相反应;过硫系数;高能球磨;粒度     

Conductive polyethylene-carbon black composites by elongational-flow injection molding Part 3. Study of the structure and morphology

The morphology and structure of high molecular weight linear polyethylene (M _w 450000) filled with carbon black and processed using molds that introduce an elongational flow component during injection molding has been examined using electron microscopy and x-ray diffraction techniques. The study of fracture surfaces reveals the display of shish-kebabs oriented along the injection direction with segregated longitudinal channels of carbon black particles. Molecular and lamellar changes in orientation are, furthermore, studied across the thickness of the moldings. It is shown that addition of carbon black particles to injection-molded polyethylene induces significant changes in lamellar orientation. Thus, while lamellar overgrowth proceeds perpendicular to the fiber axes within carbon free channels, lamellae grow randomly within carbon-enriched regions where flow is less pronounced.     

高效液相色谱法所用大孔硅胶填料的制备

对国产ＧＹＱＧ球形硅胶施加高压水热处理并进行扩孔，制备了用于高效液相色谱法的大孔硅胶填料，考察了扩孔压力，扩孔温度和扩孔时间对平均孔径和比表面积的影响。并将产品日本ＳＩＬ－３００３×１０＾－８ｍ硅胶进行了物理性质和孔分布的对比实验，结果表明ＧＹＱＧ硅胶扩孔后平均孔径为２０～３０ｎｍ接近日本ＳＩＬ－３００３×１０＾－８ｍ硅前平平均孔径２５ｎｍ。display structure     

Diffusion in organic solvents: Interdiffusion coefficient of 1,1,2,2-tetrabromoethane

Interdiffusion coefficient have been measured for 1,1,2,2-tetrabromoethane in 21 organic solvents in order to ascertain the influence of shape, size, viscosity, nature and degree of branching, of the solvent molecules on transport properties. None of the existing correlations for diffusion in binary liquid systems appear to fit all the experimental data. Steric effects due to the solvent molecules are shown to be very important in the interpretation of the diffusion process.     

Structure of polynuclear palladium(ii) hydroxocomplexes formed upon alkaline hydrolysis of palladium(ii) chloride complexes

The structure of polynuclear Pd^II hydroxocomplexes (PHC) formed as a result of alkaline hydrolysis of Pd^II chloride complexes was studied by EXAFS, SAXS, and TEM methods. It is established that in aqueous solutions a hydroxocomplex particle is a filament curled into a ball containing about 100 Pd atoms. The filament consists of planar coordination squares of PdO₄ units linkedvia one or two oxygen bridges of different geometry. Aging of samples results in an increase in the number of single bridging ligands and a decrease in the diameter of particles. Interatomic distances around palladium atoms were determined.Translated fromIzvestiya Akademii Nauk. Seriya Khimlcheskaya, No. 10, pp. 1901–1905, October, 1995.