Studies on Synthesis and Characterization of Charge Transfer Polymerization of Styrene and Alkyl Methacrylates

Abstract

Copolymers involving styrene and homologues of alkyl methacrylates (viz., methyl, ethyl, and butyl methacrylates) were synthesized at 60°C by employing a mixture of n‐butylamine and carbontetrachloride as charge transfer (CT) initiators in dimethyl sulphoxide medium. The CT complex was characterized by UV spectroscopy while the respective copolymers were characterized by employing infrared (IR) and ¹H NMR spectroscopy. The copolymer compositions were determined by using ¹H NMR spectroscopy and the reactivity ratios were computed by Fineman–Ross (F–R) and Kelen–Tudos (K–T) methods. The reactivity ratios of Sty‐MMA and Sty‐EMA copolymers indicate that higher level of styrene is incorporated in the copolymer. On the other hand the Sty‐BMA system exhibits different behavior. The higher value of r ₂ is obtained denoting that BMA is more active than styrene and hence, more BMA is present in the copolymer chain. In Sty‐MMA and Sty‐BMA systems, the product of r ₁ and r ₂ is greater than 1, representing the formation of high degree of random copolymers. However, in the case of Sty‐EMA, the product of r ₁ and r ₂ is less than 1 indicating the formation of alternating copolymer.     

Cross‐linked Multilayer Polymer‐Clay Nanocomposites and Permeability Properties

Abstract

Electrostatically layered aluminosilicate nanocomposites have been prepared by the sequential deposition of poly(allylamine hydrochloride)/poly(acrylic acid)/poly(allylamine hydrochloride)/saponite (PAH/PAA/PAH/saponite)₁₀ on poly(ethylene terephtalate) (PET) film. Exfoliated saponite nanoplatelets were obtained by extensive shaking, sonication, and centrifugation of a water suspension. To minimize permeability and improve the mechanical integrity, cross‐linking of composite films was carried out at different temperatures. The formation of amide linkage induced through heating was observed by Fourier Transform Infrared (FT‐IR) and x‐ray photoelectron spectroscopy (XPS). The cross‐linking of nanocomposites (PAH/PAA/PAH/saponite)₁₀ showed 60% decrease in permeability of oxygen when compared with the pristine PET substrate film. In contrast, water permeability of the nanocomposite membrane was not affected by heating temperature and deposition cycles.     

Synthesis and Comparison of Extraction Properties of p‐tert‐Butylcalix[n]arene Nitrile Derivatives for Selected Metals and Dichromate Anions

The article describes the syntheses and extraction properties of two p‐tert‐butylcalix[6]arene nitrile derivatives (3 and 4). The trinitrile derivative 3 has been synthesized from 5,11,17,23,29,35‐hexa‐tert‐butyl‐37,38,39,40,41,42‐hexahydroxycalix[6]arene 1. The compound 1 was directly converted to its hexanitrile derivative 4. In these syntheses, it was thought to explore the role of nitrile sites in the extraction of various metal cations and HCr₂O₇ ^?/Cr₂O₇ ^2? anions. The liquid‐liquid extraction properties of 3 and 4 towards selected alkali/transition metal cations and HCr₂O₇ ^?/Cr₂O₇ ^2? anions are reported. It has been observed that receptor 3 does not extract alkali/transition metal cations effectively, but shows affinity towards HCr₂O₇ ^?/Cr₂O₇ ^2? anions at low pH. The compound 4 is an effective form for transferring Ni²⁺ selectively, while it shows poor transferring ability for HCr₂O₇ ^?/Cr₂O₇ ^2? anions from an aqueous into a dichloromethane layer. It was observed that the cavity size of the calix[n]arenes and the cooperativity of the functionalities play important roles in two phase extraction systems.     

Silver Nanoparticles in Polyacrylamide and Hyperbranched Polyamine Matrix

Silver nanoparticles have been prepared in a polyacrylamide (PA) matrix, as well as in the presence of a hyperbranched polyamine/polyacrylamide combined system (HB‐PA) by using a reductive technique. The stability of colloidal solution of silver nanoparticles is higher (5 months) in combined matrix compared to PA alone (4 months). The prepared silver nanoparticles were characterized by different spectroscopic and analytical techniques such as FTIR, UV‐visible, X‐ray diffraction, TEM etc. TEM and XRD studies confirmed the formation of well‐dispersed nanoparticles with an average size of 9.91 nm and 8.5 nm for PA and HB‐PA matrices, respectively. The antibacterial activity of silver nanoparticles in both the matrices was tested against Bacillus Subtilis bacteria by using the diffusion disc technique. The result shows that the antibacterial activity of the active agent, Ag(0) is a little higher in the case of HB‐PA system. The dielectric constant of the matrices decreases with an increase in frequency, but the values increase with an increase of concentration of silver nanoparticles in PA matrix.     

The synthesis and fluorescence properties of novel chromenone-crown ethers

o-Dihyroxy-3-phenylchromenone derivatives, namely, 6,7-dihydroxy-3-(3′,4′-dimethoxyphenyl)chromenone and 6,7-dimethoxy-3-(3′,4′-dihydroxyphenyl)chromenone, were obtained from 2,4,5-trihydroxybenzaldehyde/3,4-dimethoxyphenylacetic acid and 2-hydroxy-4,5-dimethoxybenzaldehyde/3,4-dihydroxyphenylacetic acid, respectively, in the presence of acetic anhydride and sodium acetate under an inert atmosphere, after treatment with MeOH/HCl(aq). The chromenone-crown ethers were prepared from cyclic condensation of o-dihydroxy-3-phenylchromenones with poly(ethylene glycol) ditosylates in the presence of CH₃CN/alkali metal carbonates. The chromatographically purified novel chromenone-crown ethers were identified by ¹H NMR, MALDI-TOF mass spectrometry and elemental analysis. The fluorescence and UV–vis spectroscopic properties of the obtained chromenone-crown ethers and their complexes with Li⁺, Na⁺ and K⁺ perchlorate salts were estimated in acetonitrile. The quantum yields of novel chromenone-crown ethers were determined by the comparative method.

     

Complexation and Transport of Alkali and Alkaline Earth Metal Cations by p-tert-Butyldihomooxacalix[4]arene Tetraketone Derivatives

The binding properties of three p-tert-butyldihomooxacalix[4]arene tetraketone derivatives (tert-butyl 2b, adamantyl 2c and phenyl 2d) in the cone conformation and one derivative (methyl 2a) in a partial cone conformation, towards alkali and alkaline earth metal cations have been established by extraction studies of metal picrates from water into dichloromethane, stability constant measurements in methanol and acetonitrile, and by ¹H NMR spectrometry. Transport experiments of metal picrates through a dichloromethane membrane were also performed. The results are compared to those obtained with closely-related calix[n]arene derivatives (n = 4 and 5) and discussed in terms of the substituents, size and conformational effects. Methylketone 2a is a poor binder for all the cations studied, due to its partial cone conformation. Ketones 2b, 2c and 2d show high extraction and complexation levels for the alkali cations, with similar profiles and preference for K⁺ and Na⁺ (plateau selectivity). Towards alkaline earth cations, these ketones show a strong peak selectivity for Ba²⁺ in extraction, but a plateau selectivity for Ca²⁺, Sr²⁺ and Ba²⁺ in complexation. The nature of the substituent attached to the ketone function has some influence on their binding properties, with phenylketone 2d being a slightly weaker binder than ketones 2b and 2c. ¹H NMR titrations confirm the formation of 1:1 complexes between the ketones and the cations studied, also indicating that they should be located inside the cavity defined by the phenoxy and carbonyl oxygen atoms. Ketones 2b, 2c and 2d show transport rates that do not follow, in general, the same trends observed in extraction and complexation.     

Study of the complexation of 5,17-bis-(N-tolyliminomethyl)-25,27-dipropoxycalix[4]arene with pyridine carboxylic acids by RP HPLC and molecular modelling

Host–guest complexation process of 5,17-bis-(N-tolyliminomethyl)-25,27-dipropoxycalix[4]arene with pyridine carboxylic acids by RP HPLC method (mobile phase – MeCN/H₂O, 86/14 by volume, LiChrosorb RP 18, UV detector, λ = 254 nm) had been studied. The binding constants and Gibbs free energies of the complexes 5,17-bis(N-tolyliminomethyl)-25,27-dipropoxycalix[4]arene with the pyridine carboxylic acids are within 584 to 1914 M^? 1 and ? 15.76 to ? 18.69 kJ/mol, respectively. It was shown by the molecular modelling that the complexes are stabilised by hydrogen bonds between carboxylic groups of the acids and nitrogen atoms of imino groups at the upper rim or oxygen atoms of the hydroxyl groups at the lower rim of the macrocycle. Linear dependence of the binding constants from the acid lipophilicity log P indicates the role of solvophobic interactions during the complexation process.     

The synthesis and crystal structure of a new diprotonated Schiff base cryptand

Abstract

The synthesis and crystal structure of the diprotonated cryptand derived from the reaction of tren and 2,6-diacetyl pyridine is reported. The imino nitrogens of the Schiff base linkages are directed so that the dicarbimine functions are in trans, trans geometry relative to the pyridine C-N bond. This configuration has not previously been reported in related pyridine-derived Schiff base macrocycles.