Wet-chemical treatment and electronic interface properties of silicon solar cell substrates

On textured n-type silicon substrates for solar cell manufacturing, the relation between light trapping behavior, structural imperfections, energetic distribution of interface state densities and interface recombination losses were investigated by applying surface sensitive techniques. The field-modulated surface photovoltage (SPV), in-situ photoluminescence (PL) measurements, total hemispherical UV-NIR-reflectance measurements and electron microscopy (SEM) were employed to yield detailed information on the influence of wet-chemical treatments on preparation induced micro-roughness and electronic properties of polished and textured silicon substrates. It was shown that isotropic as well as anisotropic etching of light trapping structures result in high surface micro-roughness and density of interface states. Removing damaged surface layers in the nm range by wet-chemical treatments, the density of these states and the related interface recombination loss can be reduced. In-situ PL measurements were applied to optimise HF-treatment times aimed at undamaged, oxide-free and hydrogen-terminated substrate surfaces as starting material for subsequent solar cell preparations.      

类氢U91+离子的辐射复合及其辐射退激发过程的理论研究

基于多组态Dirac-Fock理论方法,利用GRASP92和RATIP以及在此基础上最新发展的RERR06程序,对类氢U⁹¹⁺（1s）离子的辐射复合截面以及辐射退激发过程进行了详细的理论研究.系统地计算了具有确定能量的连续电子被处于基态的类氢U⁹¹⁺（1s）离子俘获到nl （1≤n≤8, 0≤l≤6）轨道形成类氦U⁹⁰⁺（1snl）离子的辐射复合截面,并研究了这辐射复合末态退激发谱的相对强度.研究发现,类氢U⁹¹⁺（1s）离子辐射复合到不同轨道的截面随其主量子数的增大而显著减小;同时,辐射复合末态的退激发对Kα谱线的相对强度有重要影响. 关键词： 辐射复合 多组态Dirac-Fock理论方法 辐射退激发     

Ge2Sb2Te5非晶薄膜中超快载流子动力学的飞秒分辨反射光谱研究

利用飞秒时间分辨抽运-探测反射光谱技术研究了室温下Ge₂Sb₂Te₅非晶薄膜中载流子超快动力学及其激发能量密度依赖性.发现光激发后05 ps时间内,反射变化率降到最小值,然后开始迅速增加,在几个皮秒时间内达到大于初始反射率的新的最大值.反射率的减小量、增加量和增加速率均随激发能量密度的增大而增加.利用高密度等离子体的Auger复合及其感应的晶格加热模型较好地定量解释了反射率由最小到最大的快速变化过程,表明高密度等离子体的Auger复合加热 关键词： 抽运-探测光谱 2Sb₂Te₅非晶薄膜')" href="#">Ge₂Sb₂Te₅非晶薄膜 Auger复合 载流子动力学     

Vibro-acoustic behaviour of laminated double glazing enclosing a viscothermal fluid cavity

This paper presents a new numerical model to investigate the vibro-acoustic behaviour of two laminated glass plates enclosing a thin viscothermal fluid cavity. The aim of this work is to develop an original five layer (two skins plies, two adhesive films and a core ply) laminated plate finite element by mixing Kirchhoff and Mindlin plate’s theory. The formulation is based on the theory that accounts for the transverse shear in the adhesive films and in the core. The acousto-elastic model is established in dimensionless appropriate form including the effects of viscosity and thermal conductivity of fluid and by taking into account the fluid-structure interaction. The discretization of the energy functional by finite element method gives after minimisation a symmetrical coupled matrix system in which the acoustic matrices are frequency dependent. Therefore, an iterative procedure is derived to determine the eigenmodes of the coupled system. The modal approach is adopted to determine the vibro-acoustic system’s response. Then, the validation of the new laminate finite element model is achieved by comparing the sandwich plate results against data obtained from literature. Subsequently, predicted responses, such as the vibration transmissibility and the transmission loss of the coupled system, for a given laminated double glazing under an imposed homogeneous pressure are presented and discussed. Numerical results show the importance of both lamination and viscothermal fluid effects on double glazing vibro-acoustic behaviour.     

有机场致发光中能带模型与分子理论的讨论

在有机场致发光中,能带模型及分子理论从20世纪就存在尖锐的矛盾。在分层优化方案中,经SiO₂加速后的电子能量可以到达10eV,这足以激发发光材料发光,将分层优化方案应用到有机场致发光材料中。发现了固态阴极射线发光(SSCL),经过对它的交叉证明、普适性的验证,肯定了固态阴极射线的发光确实是在发光二极管,无机及有机场致发光之外的一种完全新型的电场诱导的发光。SSCL的特征是在它的光谱中出现短波发光峰,实验证明长波发光峰的减弱是由于电场离化效应。研究了这种效应出现的电压阈值并和SSCL的短波峰出现的电压相比,发现短波峰的出现是在激子的电场离化之后,从而找出了电子处于局域态与扩展态的分水岭,解释了在有机场致发光中能带模型和分子理论并不矛盾,只是适用的条件不同。激子的离化是随电场强度而渐进的变化,因此会有一个两种过程并存的范围。     

采用选择激发研究光系统Ⅱ反应中心β-Car的物理特性

光系统Ⅱ反应中心包含有2个去镁叶绿素分子(Pheo),2个β胡萝卜素分子(β-Car)和6个叶绿素a分子(Chla).对反应中心的时间分辨荧光光谱表明,两个β-Car具有不同的吸收光谱,吸收峰分别为489 nm(Car489)和507 nm(Car507),Car489靠近吸收峰为667 nm和675 nm的叶绿素a(Chl a),它的主要功能是保护反应中心免受单态氧的破坏,而不能将激发能传递给光化学反应活性的色素分子P680;Car507靠近吸收峰为669 nm的Chl a分子;能够将激发能传递给P680,进行电荷分离.采用全局优化拟合的方法对荧光光谱进行处理,Car489在61 ps时间内将能量传递给Chl a672, 随后传给Chl a677,处于激发态的Chl a677在3 ns衰减到基态;Car507在274 ps时间内将能量传递给P680,P680＋Pheo-的电荷重组发生在3.8 ns和16 ns.     

Electron–ion recombination in radiation tracks in liquid argon: a computer simulation study

A simulation method is proposed to model electron–ion recombination in radiation tracks in liquid argon at 87 K. The method is applied to calculate the electron escape probability in clusters of up to 20 pairs of electrons and cations that represent a fragment of the track. The results reproduce the basic features of the track recombination in liquid argon observed in experiment.     

纳米级包覆层厚度对染料敏化太阳电池中电子注入效率和电子寿命的影响

选取氧化钐作为包覆材料, 采用浸渍法对已烧结好的纳米TiO₂多孔薄膜电极进行修饰, 并将其应用于染料敏化太阳电池中, 研究了纳米级氧化钐包覆层厚度及均匀性对染料敏化太阳电池中电子注入效率和电子复合过程的影响和作用机制. 结果表明, 包覆层厚度对电子注入效率和电子复合具有明显影响, 且电子注入效率和电子寿命随包覆层厚度的增加而呈现相反的变化趋势, 包覆层厚度在0.4 nm以内, 电池性能最好.     

Photovoltaic Performance of Triphenylamine Dyes-sensitized Solar Cells Employing Cobalt Redox Shuttle and Influence of π-conjugated Spacers

Developing photosensitizers suitable for the cobalt electrolyte and understanding the structure-property relationship of organic dyes is warranted for the dye-sensitized solar cells (DSSCs). The DSSCs incorporating tris(1,10-phenanthroline)cobalt(II/III)-based redox elec-trolyte and four synthesized organic dyes as photosensitizers are described. The photovoltaic performance of these dyes-sensitized solar cells employing the cobalt redox shuttle and the influences of the π-conjugated spacers of organic dyes upon the photovoltage and photocur-rent of mesoscopic titania solar cells are investigated. It is found that organic dyes with thiophene derivates as linkers are suitable for DSSCs employing cobalt electrolytes. DSSCs sensitized with the as-synthesized dyes in combination with the cobalt redox shuttle yield an overall power conversion efficiency of 6.1% under 100 mW/cm² AM1.5 G illumination.